Question about Sony Ericsson P990i Smartphone

2 Answers

No internet setting

I cant connect to internet, it say's no internet configuration, ga back to control panel..

Posted by on

  • Anonymous Feb 19, 2009

    i recently got tis fone but i cant get the net n in the US tmobile doesn't support this fone

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

You need your Service Provider to send you Internet Settings.
Ring them up and ask.

Once they have sent them to you, save it and set as default internet connection.

Posted on Oct 10, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Hi you must contact your service provider..They help to you...

Posted on Feb 12, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is router


Basic steps to configure your router:
  1. Set Up IP Address and Sub-net Mask for their router.
  2. Now open the router Web Page by 192.168.0.1 in the browser URL.
  3. Login with your User Name and Password.
  4. For Manuall Configuration and Set-up router according to your ISP.
Router have different configuration according to Model. for more router support http://support.dlink.com/ and any router related technical support D-Link Router Support .

May 26, 2014 | D-Link Computers & Internet

1 Answer

I have upgraded to Windows 7 and also a new Gigabyte GA-H61M-D2-B3 Motherboard. 4GB DDR Ram I have plugged my Cambridge Soundworks SW320 in but I only get some sound, eg all music and back ground sound is...


Hi,
Gigabyte GA-H61M-D2-B3 Motherboard supports 2/4/5.1/7.1-channel HD audio, whereas Cambridge Soundworks SW320 is 2.1 (only). Hence, the PC should be configured to provide 2.1 Channel output. The audio of your system may be configured to 2.1. So, please check the Realtec Audio sound manager/ configuration from the control panel or from tray (near clock) and set it to 2.1 (2 Channel Stereo Output).
Moreover, audio on your PC may be running on default HD Audio Drivers. So, you may also download/ install the latest drivers for Gigabyte GA-H61M-D2-B3 Motherboard.
(Refer to download section at the bottom of the page). After installing audio drivers, you would be able to configure the audio.

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Sep 13, 2011 | Creative Labs SoundWorks SW320 Computer...

1 Answer

I cant connect to the internet on my laptop i do have the wireless but cant connect to the internet


Press Fn +F5 key then turn on wifi. Also make sure wireless switch is turned on.Then check if sitll not connected then uninstall wireless network driver from add remove programs in control panel then reinstall. Then if you are able to connect wifi then still not access internet then follow below to configure wifi router. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on WAN setting and set as your internet service provider settings.Click on wireless and enable it if it is disable then save settings and restart router. Then check. . Let me know if you need further assistance. Thanks for using FixYa.

Aug 11, 2010 | Westell Wirespeed ProLine 6100 Router...

1 Answer

HOW TO CONNECT WLAN IN MY W960I MOBILE - PLS ANSMER ME STEP BY STEP


Go to:

Tools
Control Panel
Connections
WLAN

..this shall help you search for available wireless networks with their respective SSIDs (Service Set IDentifiers).

There are 2 kinds of wireless networks: Hotspots and configured networks. When connecting to the Internet using a Hotspot, no further configuration is needed. When you connect using a configured network, a WLAN account is required in your phone. For configured networks, you may or may not use the New Account Wizard in your phone.

Setting up Internet Account using New Account Wizard:
1. Go to:
Tools
Control Panel
Internet Accounts
2. Click "More" on the lower right part of your screen.
3. Select "New Account", then "WLAN".
4. Enter the details required in accordance with your preferred wireless network.


Setting up Internet Account without using the Wizard:
1. Connect to the WLAN first.
2. Prompt for encryption keys of the network you are attempting to connect to (passwords).


..Hope this helps. =)

Apr 23, 2010 | Sony Ericsson W960i Cellular Phone

2 Answers

I cant get my router working


    Connect Equipment
  1. Turn off your computer and disconnect the Ethernet cable running from the back of the computer. Plug the cable into the port marked "Internet" on the back of the router. Plug the blue cable included with the router into one of the four LAN ports on the back of the router and plug the other end into your computer Ethernet port. Turn the modem on and wait two minutes. Plug in the router and wait one minute. Then turn on your computer. After two minutes the router should have four status lights glowing on the front panel: power, Internet, wireless and LAN.
  2. Configure Router
  3. Open your Internet browser on the computer. The router will automatically display the Smart Wizard configuration page. Click "OK." On the next page, enter the region where you are located and your wireless networkmag-glass_10x10.gif name (SSID). The default is "NETGEAR," but you should change it to a different name you can easily remember. The name is case-sensitive. Click "Next." Then click "Done."
  4. Configure Computer for Wireless Access
  5. Go to "Start" and click on "Control Panel." Open "Network Connections" and right-click on "Wireless Network Connection." Select "Properties." Then select the "Wireless Networksmag-glass_10x10.gif" tab. Check the box to use Windows for network configuration, then click "Add..." Enter the same SSID name that you entered when you set up the router. Select "Disabled" for data encryption as that is the router default setting. Click "OK." Now try to connect to an Internet website to verify connectivity.
  6. Router Logon
  7. To log on to your router, go to Routerlogin.net. Enter "admin" for the user name and "password" for the password. On the router home page, go to "Set Password" and change the router password. Then choose a security protocol to use that is compatible with your computer's wireless adapter. WPA-PSK is the best choice if your wireless adapter supports it.

Dec 14, 2009 | NetGear WGR614 Wireless Router

1 Answer

I want to set up wlan in my sony ericsoon w960i please step by step


Go to:

Tools
Control Panel
Connections
WLAN

..this shall help you search for available wireless networks with their respective SSIDs (Service Set IDentifiers).

There are 2 kinds of wireless networks: Hotspots and configured networks. When connecting to the Internet using a Hotspot, no further configuration is needed. When you connect using a configured network, a WLAN account is required in your phone. For configured networks, you may or may not use the New Account Wizard in your phone.

Setting up Internet Account using New Account Wizard:
1. Go to:
Tools
Control Panel
Internet Accounts
2. Click "More" on the lower right part of your screen.
3. Select "New Account", then "WLAN".
4. Enter the details required in accordance with your preferred wireless network.


Setting up Internet Account without using the Wizard:
1. Connect to the WLAN first.
2. Prompt for encryption keys of the network you are attempting to connect to (passwords).


..Hope this helps. =)

Jul 10, 2009 | Sony Ericsson W960i Cellular Phone

1 Answer

INternet and router problems


Have you changed the configuration of your internet at some point? In Vista I think you can change them somewhere in Control Panel under something like "Internet options" or "Connectivity"...

Ensure that all settings are set to allow full speed through to your system.

Another thing is that some sort of Antivirus software may be blocking some of the internet connections, check the confuguration on your Antivirus software incase it is blocking internet signals.

Hope this helps!

Dec 27, 2008 | Computers & Internet

1 Answer

Can;t use intent on mobile


Here is what you should do step by step:

I.Configure your Computer
1.Install Bluetooth Adapter
2. Bluetooth Configuration->Local Services-> Add Serial Services ->Bluetooth Serial Port->Properties
Check – Startup Automatically
Check – Secure Connection
COM Port: COMx( mine is COM6)
3.Control Panel -> Phone and Modem Options->Modems->Add-> Check Don’t detect my modem->Next->(Standard Modem Types)->Communication cable between two computers->Next-> on witch port do you want to install it ? -> Selected ports -> COMx ( in my case COM6)->Next->Finished
Now in phone and modem options->Modems you should have : Communications cable between two computers : Attached to : COMx ( COM6 my case)
Select Communications cable between two computers -> Properties->Modem-> Maximum Port Speed : 115200 -> ok ->ok.
4.Control Panel ->Network Connections ->Create a new connection-> Next->Set up an advanced Connection-> Next-> Accept incoming connections->Next-> Check : Communications cable between two computers ->Next-> Check: Do not allow virtual private connections->next->next->select: Internet Protocol(TCP/IP)->Properties:
Network access : Check Allow callers to access my local area network
TCP/IP address assignment : Specify TCP/IP addresses:
From: 192.168.0.x ( x=50 in my case)
To: 192.168.0.y (y=52 in my case) 
->OK->Next->Finish
5.Network Connections
Bluetooth Network -> Enable
Internet Connection ( your internet connection ) -> properties->Advanced->Check:Allow other network users to connect trought this computer’s Internet Connection->OK
If all goes well : Bluetooth Network-> Properties-> Internet Protocol ( TCP/IP)->Properties Should have the following setting:
Checked Use the followind IP address:
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
->OK.
6.Start->Control Panel->Administrative Tools->Services->Routing and remote access->Properties->General: Startup type : Automatic - this service MUST be started 
**7.Install AnalogX Proxy http://www.analogx.com:80/files/proxyi.exe (for the latest version)
Proxy->Configure-> Proxy Binding: 192.168.0.x ( for me x=50 )->ok. 
! If you use a proxy, remember to start it .

II. Configure Phone:
1.Install GnuBox - http://gnubox.dnsalias.org/gnubox/ ( for the latest version)
2.Configure Access point
Tool->Settings->Connection->Accces Points-> New Access point->Use Default Settings
Connection name: Bt
Data Bearer: Packet data
Access point name : Bt
User name: none
Promt Password: NO
Password: ****
Authentication: Secure
Homepage: none
Option->Advanced settings
Network Type: IPv4
Phone IP address: Automatic
Name Servers: Automatic
**Proxy serv. Address: 192.168.0.x ( for me x=50)
**Proxy port number: 6588
3.Configure all the applications from your phone witch require internet acces to use Bt Access Point
4.Configure GnuBox
Options->Install Set to GPRS
Options->Install Create Records
Options->Install->Copy settings from GPRS
Options->Install->set RAS login script
Exit GnuBox
Open Gnubox
Options->2box Bluetooth->Serial Port
Select – your computer
Do you want to require encryption? Yes
Options-> Install->change default AP
** Configure NetFront
Options->Settings->Connection
Enable Proxy : Yes
Proxy Host : 192.168.0.x ( in my case x=50)

Now you can browse the internet from your phone.

NOTE: First Configure the phone and your pc without the ** settings, and if you can’t browse the Internet form your phone then use the ** settings.

Hope this works fine.Thank you.

Nov 25, 2008 | Computers & Internet

1 Answer

No internet connection


Internet connection solutions
  1. Restart the computer.
  2. Test the jack.
  3. Test the equipment.
    1. Try a different jack that you know works.
    2. Try a different cable that you know works.
  4. Check your computer settings.
  5. Renew your IP Address
    1. [x] Windows Vista
      1. Look for your Ethernet card:
        1. Right-click on My Computer from the Start Menu or on the desktop.
        2. Left-click on Properties.
        3. Click on Device Manager on the left side under "Tasks".
        4. Expand the Network Adapters and look for any yellow exclamation points. Make sure a card is listed.
        5. If there are exclamation points, or if there is no card listed, you need to reinstall the card.
      2. Set your IP address to configure Automatically (through DHCP):
        1. Go to the Control Panel in your computer (in the Start Menu).
        2. Go to Network & Sharing Center.
        3. Under "Network", go to Local Area Connection and select "View Status". In new window, choose Properties at the bottom.
        4. Scroll down "This connection uses the following items" list to Internet Protocol (TCP/IP).
        5. Select Internet Protocol (TCP/IP) and click Properties.
        6. Change to "Obtain an IP address automatically".
        7. After you have changed this, restart computer.
      3. Check to see if your network connection is on:
        1. Go to the Control Panel in your computer.
        2. Go to Network Connections. If you cannot see Network Connections, go to Network and Internet Connections and then go to Network Connections from there.
        3. If there is a red X through the Local Area Connection, or the Local Area Connection is grayed out, double-click on the X to enable.
    2. [x] Windows XP
      1. Look for your Ethernet card:
        1. Right-click on My Computer from the Start Menu or on the desktop.
        2. Left-click on properties.
        3. Go to the Hardware tab and click on Device Manager
        4. Expand the Network Adapters and look for any yellow exclamation points. Make sure a card is listed.
        5. If there are exclamation points, or if there is no card listed, you need to reinstall the card.
      2. Set your IP address to configure Automatically (through DHCP):
        1. Go to the Control Panel in your computer (in the Start Menu).
        2. Go to Network Connections. If you cannot see Network Connections, go to Network and Internet Connections and then go to Network Connections from there.
        3. Right-click on Local Area Connection and go to Properties.
        4. Scroll down the "This connection uses the following items" list to Internet Protocol (TCP/IP).
        5. Select Internet Protocol (TCP/IP) and click Properties.
        6. Change to "Obtain an IP address automatically".
        7. After you have changed this, restart the computer.
      3. Check to see if your network connection is on:
        1. Go to the Control Panel in your computer.
        2. Go to Network Connections. If you cannot see Network Connections, go to Network and Internet Connections and then go to Network Connections from there.
        3. If there is a red X through the Local Area Connection, or the Local Area Connection is grayed out, click on Local Area Connection and click "Enable."
    3. [x] Macintosh OS X (10.4 or "Tiger")
      1. Look for Network Cards:
        1. Go to the System Preferences panel from the Dock or Apple Menu.
        2. Open Network icon under Internet and Network.
        3. This shows your current network settings. Green lights for each device means it is connected and red mean there is no connection.
        4. Go to Show and then click on Built-in Ethernet.
        5. Under the TCP/IP tab make sure "Using DHCP" is chosen under the top option.
      2. Renew IP address. Hit "Renew DHCP" or change it to a manual address. Then restart and change it back to DHCP to renew the connection.
      3. Set your IP address to "Configure Automatically using DHCP". Under the Ethernet tab make sure that configure is set to "Automatically". Click OK until you are back to the main System Preferences windows.
      4. Check your privacy setting
        1. Go to Sharing under Internet and Network in System Preferences
        2. Under Services everything should be unchecked.
    4. [x] Macintosh OS X (10.5 or "Leopard")
      1. Look for Network Cards:
        1. Go to the System Preferences panel from the Dock or Apple Menu.
        2. Open Network icon under Internet and Network.
        3. The left menu shows your current network settings. Green lights for each device means it is connected and red mean there is no connection.
        4. Select Ethernet from the left menu. Go to Advanced.....
        5. Under the TCP/IP tab make sure "Using DHCP" is chosen under the top option, "Configure IPv4".
      2. Renew IP address. Hit "Renew DHCP" or change it to a manual address. Click OK.Then restart and change it back to DHCP to renew the connection.
      3. Click OK until you are back to the main System Preferences window.
      4. Check your privacy setting
        1. Go to Sharing under Internet and Network in System Preferences
        2. Under Services everything should be unchecked.
    // MAIN FUNCTION: new switchcontent("class name", "[optional_element_type_to_scan_for]") REQUIRED // Call Instance.init() at the very end. REQUIRED var bobexample=new switchcontent("switchgroup1", "div") //Limit scanning of switch contents to just "div" elements bobexample.setStatus('[x] ', ' ') bobexample.setColor('#674a80', '#3b5998') bobexample.setPersist(true) bobexample.collapsePrevious(true) //Only one content open at any given time bobexample.init()
  6. Make sure your computer is clear of all viruses, spyware, and adware.

Oct 03, 2008 | Computers & Internet

1 Answer

No sound from front panel of GIGABYTE GA-MA69G-S3H


Aloke,
It does mention in your manual (top of pg. 28 -notes), that in order to use the HD Front Panel Audio connector the pin configuration are different than the AC97 connections. Your current case is set up for AC97. You will have to contact Mfg. for the case click the link for Gladiator support:
http://www.a-top.com/jsp/info.jsp?number=3

You can try this, open up your control panel, look for an icon that's named Sound Effects Manager. Open it. Click speaker configuration.
This is part of Realtec's software. This is where you can setup & check both front & back ports (Audio & Mic).
If this part of Realtec did not install goto Gigabyte & down load your audio software & re-install it. (Just a suggestion).
http://www.giga-byte.com/Support/Motherboard/Driver_Model.aspx?ProductID=2554

Hope this helps. If you make the call it will be a fix.
Good luck.

Mar 14, 2008 | Computers & Internet

Not finding what you are looking for?
Sony Ericsson P990i Smartphone Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Computers & Internet Experts

sandrasteven

Level 3 Expert

724 Answers

Brad Brown

Level 3 Expert

15133 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Sony Ericsson Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...