In most cases when the CD does not play it is
possible that the optical head is a suspect. Sometimes it might pick up ordinary
audio CD but will not play other formats. This indicates that the optical head
is weak and so there is no detection or scanning of the CD. If the optical is working
the tracks will be read immediately but with no scanning the laser head can be
defective. The main motor will not work in some cases as
unless the tracks are read the drive motor will not work with signal from the
processor. Also in some cases the central motor base can shift and so the
distance to the disc can be more resulting in low detection. You can pull up
the spindle to come closer.
Sometimes certain cleaner disks will not be tracked to run for cleaning as it will
not be read and so will reject. Hence it is ideal to manually clean the laser
head eye using a cleaning swap /cotton bud with gentle pressure on the lens
eye.
If there is no result then watch if the CD spins or tries to spin. If so the
board seems to work unless a test is taken on the main board but the
possibility of a defective optical head can be the suspected fault.
If any of the above seems otherwise we must recheck with possibilities of a
malfunction of the main processor board
46 views
Usually answered in minutes!
×