Question about Insignia IS-LCDTV32 32 in. Television

1 Answer

INsignia ns-lcd32 Hey Dals thanks for the answer..another questtion if you dont mind...how would i check the backlight?? Also i had taken it to the TV shop and they said it it was the mother board, i inferred power board with all the other problems i have seen...would they have meant main board??

Posted by on

  • jsvycit Oct 10, 2008

    Part number is 782.26ha37-690e. Best buy parts has is for about 220 including shipping..however after all this I am not sure whether it is worth it to fix...i can put the 220 towards a new tv...if i would not have replaced the pcb so fast this may have been worth it...ah well...thanks alot for your time!!



    Jason

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

Yes..Do you have the part number?

Posted on Oct 10, 2008

  • Sunny Valiplackal Oct 10, 2008

    How you check Back light,



    Power up the unit and wait 1 or 2 minitues,then with one finger touch screen you will see light inside screen..



    Good luck

    Dals123

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of T CON board on NS LCD32


Cheryl, I will post links to what the T con board looks like so when you remove the rear panel from TV, you will be able to compare and find it easily.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

LCD TV Repair Tutorial Con Board Common Symptoms Solutions How to Replace...

INSIGNIA NS LCD32 Con Board LC320W01 SLA1 6870C 0142B 2L

Amazon com INSIGNIA NS LCD32 CON BOARD CPT 320WF01C SD Electronics

Mar 23, 2016 | Insignia NS-LCD32 LCD TV

1 Answer

How can I reset my insignia tv #NS-LCD32 to global volume unlock with a RCA universal remote


Try this solution by another user:

timyorba 1 solutions Jul 21, 2011
So, For anybody who doesn't know yet, you do not need the factory remote to restore button functions to your Insignia IS-LCDTV26. All you need to do is program a universal remote that can power on and off the TV, then

"**press the "MUTE" Button 10 times successively**"

and Voila! Unlocked, you should see the status appear in the corner of the TV if everything worked, if not try another tv code or try the manual search function on the remote to find another compatible code set.

Dec 26, 2012 | Insignia NS-LCD32 LCD TV

1 Answer

Need to setup my tv #NS-LCD32 have no remote


You are going to need an original remote for that set.

Dec 20, 2012 | Insignia NS-LCD32 LCD TV

1 Answer

Insignia ns-lcd32 has developed a vertical shadow.


Unfortuntly you have a panel that is going out. This is not cost effective to fix.

Apr 11, 2012 | Insignia NS-LCD32 LCD TV

1 Answer

Insignia NS-LCD32


Most likely either the main board (processes all signal) or even an issue with the power board (supplies wrong voltage somewhere).

In either case not cheap.

Mar 23, 2012 | Insignia NS-LCD32 LCD TV

1 Answer

Ns-lcd32 won't turn on remotely or manually


Service manual:
http://www.my.electronicshelponline.com/uploads/Insignia_Xoceco_LC-37HV41_NS-LCD37HD-09_LCD_TV_SM.pdf

Check the power supply module.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.

Sep 27, 2010 | Insignia NS-LCD37 37 in. LCD TV

1 Answer

Insignia ns-lcd32-09 wont play VHS


Yes, that is correct you need composite (or coax) cabling to your TV. The unit cannot carry the VHS signal via component video or digital audio cabling

Feb 27, 2009 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Red tint on my TV, instead of all colors? Reset doesnt work?


Sounds like the component cables are misplaced. Check that, and report back.

Dec 30, 2008 | Insignia IS-LCDTV32 32 in. Television

Not finding what you are looking for?
Insignia IS-LCDTV32 32 in. Television Logo

Related Topics:

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Flat Panel Televisions Experts

Sp Gupta

Level 3 Expert

667 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

The Wyzzyrd

Level 2 Expert

83 Answers

Are you an Insignia Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...