I have a TI-82 and the following 7 keys do not work...... #'s 0,1,4,7 and the "clear" "," sin keys

Mike C

Hello mchonto. Remove the battery. Perform the following on a cloth placed on a table. Remove to case screws buy using a jewellers screw driver. Carefully open the case. Disassemble the main PBbd support to aquire access to the key board. The key board is made up of diaphram switches. The diaphrams may be broken or dirty or a trace on the PCbd is open. Clean the diaphrams with a dry Q-tip or mostion Q-tip with Aceton. Connect the battery & test. #2 CAREFULLY reseat the felx ribbon trace from the key bd in to the socket. Reconnect the battery & test operation. Malfunction changed, clean the traces with a #2 pencil eraser. Retest. Good Luck

Posted on Oct 09, 2008

The -0.7568 value is the correct result for the sine of 4 radians. To switch the calculator to degrees, press MODE, use the cursor keys to move down to the Rad/Deg line, highlight "Deg", press ENTER then 2nd [Quit].

Jun 01, 2013 | Texas Instruments TI-82 Calculator

Press SIN 4 3 2ND [ANGLE] 1 3 0 2ND [ANGLE] 2 ENTER

2ND [ANGLE] 1 gives you the degrees symbol, 2ND [ANGLE] 2 gives you the minutes symbol. If you need seconds, use ALPHA ["] (on the + key).

Note that this usually won't give you an EXACT value, but only a ten-digit approximation.

2ND [ANGLE] 1 gives you the degrees symbol, 2ND [ANGLE] 2 gives you the minutes symbol. If you need seconds, use ALPHA ["] (on the + key).

Note that this usually won't give you an EXACT value, but only a ten-digit approximation.

Dec 05, 2012 | Texas Instruments TI-84 Plus Calculator

The INV key that you may find on some scientific calculators has, on the TI 83/84/ Plus calculators, an equivalent key marked [2nd].

On the TI83/84 Plus, each trigonometric function has a second marking [SIN^-1], [COS^-1] or [TAN^-1]. To calculate the inverses of trigonometric functions ( arc sine, arc cosine, arc tangent) you press [2nd] followed by the relevant trigonometric function key For example, [2nd] [SIN] displays sin^-1( on the command line.

Unfortunately the hyperbolic functions and their inverses are only accessed through the CATALOG. You press [2nd][0] to open the CATALOG. Then you scroll down the CATALOG list to reach cosh(, cosh^-(, sinh(, sinh^-1(, tanh(, or tanh^-1(.

To speed the search in the catalog, you use the ALPHA keyboard: To reach cosh(, press[PRGM] and you scroll down from there.

On the TI83/84 Plus, each trigonometric function has a second marking [SIN^-1], [COS^-1] or [TAN^-1]. To calculate the inverses of trigonometric functions ( arc sine, arc cosine, arc tangent) you press [2nd] followed by the relevant trigonometric function key For example, [2nd] [SIN] displays sin^-1( on the command line.

Unfortunately the hyperbolic functions and their inverses are only accessed through the CATALOG. You press [2nd][0] to open the CATALOG. Then you scroll down the CATALOG list to reach cosh(, cosh^-(, sinh(, sinh^-1(, tanh(, or tanh^-1(.

To speed the search in the catalog, you use the ALPHA keyboard: To reach cosh(, press[PRGM] and you scroll down from there.

Feb 27, 2012 | Texas Instruments TI-84 Plus Calculator

First, make sure you have the appropriate angular mode set. To change the angular mode, press MODE, use the arrow keys to highlight either "RADIAN" or "DEGREE" on the third line, press ENTER, then press 2ND [QUIT].

Press the appropriate sin, cos, or tan key (two rows above the 7, 8, and 9 keys), enter the angle, close the parenthesis, and press ENTER. For example, to calculate the sin of 2.1, press

SIN 2 . 1 ) ENTER

Press the appropriate sin, cos, or tan key (two rows above the 7, 8, and 9 keys), enter the angle, close the parenthesis, and press ENTER. For example, to calculate the sin of 2.1, press

SIN 2 . 1 ) ENTER

Jun 07, 2011 | Texas Instruments TI-83 Plus Calculator

1 . 0 7 ^ 3 0 ENTER

^ is the key just above the divide key.

^ is the key just above the divide key.

Apr 04, 2011 | Texas Instruments TI-82 Calculator

The arrow is the STO key just to the left of the 1 key. The comma key is just above the 7 key.

Nov 20, 2010 | Texas Instruments TI-82 Calculator

The comma key on the TI 84 SE is above the 7 key, and it is just left of (, right of x squared, and below SIN. thats where the "," key is. If you're asking something else, please clearify. My understanding is that you don't know where the comma key is.

Mar 16, 2009 | Texas Instruments TI-84 Plus Silver...

same thing happened to me except its 7 4 and 1 along with the "apps" "sin" and "," keys and it just registers as a 0. ( when i press those keys it puts in 0 on screen)

Aug 25, 2008 | Texas Instruments TI-84 Plus Calculator

for function = (sin,cos,tan,sec,cosec,cotan)

arc(function) = function^-1, calculated in the first quadrant for simplicity(0-pi/2) (0-90deg), as all functions repeat circularly

just another method of notation

http://www.mathwords.com/t/tangent_inverse.htm

arc(function) = function^-1, calculated in the first quadrant for simplicity(0-pi/2) (0-90deg), as all functions repeat circularly

just another method of notation

http://www.mathwords.com/t/tangent_inverse.htm

Jun 19, 2008 | Texas Instruments TI-84 Plus Silver...

if you want to square sin(3), press:

(

sin

3

)

)

^

2

(

sin

3

)

)

^

2

Sep 24, 2007 | Texas Instruments TI-89 Calculator

190 people viewed this question

Usually answered in minutes!

factorial key on ti-82?

×