Question about Samsung - Projection TV replacement lamp Projector Lamp
Samsung DLP TV Model HLR 5667WX/XXA
TV made a pop sound and picture went out. No pic, no sound, no nothiing. When I turn it on, the lamp light bllinks for appx 30 seconds then the lamp, timer and stand by temp lights all blink. That is all it does. Any suggestions or help? Unit is appx 3 1/2 yrs old. No other probs ever.
Thank you for your time and effort on this. Tom
There are several capacitors that are known, in Samsung TV's that go out.. ( I replaced mine until the board was burnt through.. bought a new board, they went out again.. BOUGHT A LG TV!!)
Samsung settlement warrants older TVs with faulty capacitors
Samsung LCD Plasma TV Capacitor Repair Kit Replacement Parts
replacing these is not hard at all.. if you can use a soldering iron, you can do it..it just takes time..
Repair Samsung LCD TV Relay Clicks Shuts Off Won Come On
WATCH THESE VIDEOS FIRST.
Samsung TV Won Turn On How to Repair Bulging Capacitor for Clicking Noise
My Repair of 46 Samsung LCD TV with Bad Capacitors
Posted on Jul 18, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I'm not a TV repair guy but my owners manual states that when all three LED's or lights on the front of the TV are flashing, that the lamp needs to be replaced. Might want to look into this. Good luck!
Posted on Aug 31, 2009
SOURCE: I own a Samsung HL-R5067W 50
Check your color wheel. There is a DIY guide for replacing the color wheel. Mine did the same thing yours is and my color wheel was all busted up. Unfortunately after replacing the color wheel my set continues to do the same thing, but this could mean I need to replace the ballast as well.
Posted on Oct 20, 2009
Had similar problem. Thought it was the lamp. Examined old lamp but it appeared to be good. Ordered a new one anyway. Changed the lamp but the TV screen would not come on. It would make the usual noise as it was going to come on normally but it would cycle 3 times & then turn off. The LED lights in the front panel would indicate a defective lamp. Then read about the ballast. Changed the ballast & still same problem. Tried starting the TV without the lamp installed & noticed that the color wheel did not spin. Removed old color wheel & discovered it was broken. This appears to be the cause of all of my problems. I wish I new earlier of the test-turn on the TV without the lamp being installed & check to see if the color wheel is spinning. Would have save money on the lamp & ballast.
Posted on May 03, 2010
Tips for a great answer:
Jan 09, 2016 | Samsung Televison & Video
Oct 31, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...
Oct 27, 2009 | Samsung HLR5064W DLP Projection TV
Oct 10, 2009 | Televison & Video
Jul 14, 2009 | Samsung HL-R6167W TV
Mar 28, 2009 | Samsung DLP HL-P5663W 56" TV
Oct 19, 2008 | Samsung DLP HL-P5663W 56" TV
Mar 27, 2008 | Samsung HLR5667W 56" Rear Projection HDTV
143 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: