Question about Pioneer AVH-P5700DVD Car DVD Player

1 Answer

Pioneer avh-p5700dvd (winning soung)

The units acc wire was ran to 2 monitors and one of the wire coming from the wire harness the acc wire touch metal and everything turned off. changed fuse from the engine compartment and sealed wire that touched metal but know it has a loud winnig sound coming threw my speaker with just the ignition key to on.When i turn car on it triples with the noise and when i shut the stereo off it makes a big popping sound. So i wanted to know if the resistor feom the acc wire from the pioneer unit goes bad after a short or is the radio the problem? please let me know asap what it can be because if its the resitor from the acc wire i will order a new harness. i will apreciate any info. thanx. my email is domingo.ortiz@atlantichealth.org

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same issue with mine. All I did was reconnect my ground. (cleaned the surface abit better but now it works)

Posted on Oct 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bypass pioneer avh-p5700dvd


The recent pioneer DVD devices structures setup is achievable by inspecting the vehicles default wiring kits to determine the most compatible medium. The prior wires in the vehicle stereo appear mutated with attempt to extract and replace with new DVD stereo. Inspect the mutilated wires to determine the kit harness that allows connecting the new device on one end while binding to the electrical cables extended surfaces. The new stereo player makes possible connection of a multipurpose harness that solves the problems that may be thought to require bypass. Once the appropriate connection kit harnesses are acquire, the wiring should provide connectivity to speakers, tweeters, woofers and several devices as amplifiers also necessary predicted during installation else missing audio may be detected after. Refer to auto installations experts to acquire the complementary parts to attain the installations.

Feb 05, 2011 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

My Pioneer AVH-P5700DVD's screen is very dimmed i can bearly see the buttons, it seems like there is no brightness in the screen please help... I checked everything already... Maybe is a dim adjustment?


it could be a dim adjustment. did you hook up the dimmer wire to the factory harness if so and your dash lights are low then thats the issue. if not then check the brightness on the unit. if that is not lowered then the internal lights inside the unit have started to burnout. if thats the case uninstall it and send it in for repairs

Nov 17, 2010 | Pioneer AVH-P5700DVD Car DVD Player

2 Answers

Calibrating touch screen


Hello,
I believe I have the information for which you are searching! Please try the following instructions to re-calibrate your Pioneer
touch panel:
NOTE: Pioneer recommends using the supplied pen to make the adjustment.
Step 1: Touch the source icon, then touch OFF to turn the unit off.
(you can display the source icon by touching the screen).
Step 2: Press and hold BAND.
(The 4-point calibration screen opens).
Step 3: Lightly touch the arrow in each corner with the supplied pen. (The arrows turn red when touched; the calibration cannot
complete until all arrows are red. To cancel, press V.ADJ).
Step 4: Press BAND to complete the 4-point calibration.
(The new position data will be saved automatically).
NOTE: Do not turn off the ignition while the unit is saving data.
Hope this helps! Good luck and thank you XXX XXXXX JustAnswer.com!

Read more: http://www.justanswer.com/questions/2srse-how-to-recalibrate-the-screen-on-a-pioneer-avh-p5700dvd#ixzz0pd3hrBze

May 20, 2010 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

AVH-P5700DVD Car DVD Player: how to re-calibrate the touch screen for a Pioneer...


In order to calibrate the AHV-P5700DVD you need to press and hold the Boost and the + button and then press the reset button with a pen. continue to hold the Boost and + until the screen opens back up and you can see the calibration screen. use the arrow nob on the right to select the menu item, and the A button to select your item.

May 17, 2010 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

I need a pioneer avh-5700dvd diagram for the wiring harness.i need to know where the wires go in to the blue plug


the blue wire is for hands free mobile connection, you do not need to wire this up unless you want hands free

Jan 29, 2010 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

Help i need a wiring diagram for a pioneer avh-p5700dvd to connect to a wiring harness and a tr-7 output module


ftp://extra.abt.com/PDF_Files/avhp5700dvd_installation.pdf

This is the installation manual for the AVH-P5700DVD, including a wiring diagram for the wiring harness.

http://www.pac-audio.com/PACProductData/TR7/1_Instructions/tr-7_instructions_010505.pdf

This is the wiring diagram for the PAC TR-7 UNIVERSAL TRIGGER OUTPUT MODULE VIDEO BYPASS.

Jan 12, 2010 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

Two black wires on harness of AVH-P5700DVD


If they are black or green then they are ground. The more ground the better. SO yes, both are ground. DO check fuse as well.

Sep 23, 2009 | Pioneer AVH-P5700DVD Car DVD Player

2 Answers

Avh-p5700dvd touch screen


Go to: http://akamaipix.crutchfield.com/Manuals/130/130AVHP570.PDF This manual will give you everything you need for your Pioneer unit.

Nov 25, 2008 | Pioneer AVH-P5700DVD Car DVD Player

Not finding what you are looking for?
Pioneer AVH-P5700DVD Car DVD Player Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Video Players Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Craig Sagar

Level 1 Expert

11 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Are you a Pioneer Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...