Question about RCA Standard (CRT) Televisions

1 Answer

TV, RCA MOD # F19424, CTC 203U5, Picture blury

RCA MOD # F19424, CTC 203U5, Picture is blury. Have adjusted sharpness anf contrast up and down the slider range only helped a little . Can you help? What are the adjustment holes on the back marked "F" and "S" for?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

Focus and Screen. The focus control may help, just like focusing a set of binoculars or an old camera. Watch the picture on the TV, using a mirror can help and make an adjustment until the picture is as clear as you can get it. If it still is not clear it may mean that your picture tube is weak.
If you can avoid it, don't touch the Screen control. If you have, let me know and I can advise you on the proper way to adjust it.

Posted on Oct 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plano tv samsung


Adjust the brightness until it starts making the black in the picture slightly milks and back it off slightly
Adjust the contrast so that the whitest whites show detail, too much contrast and they disappear
Adjust colour to suit, start with it half way, look at flesh tones on a news reader as a guide and adjust sharpness so you can see detail but not so that there are false or visible edges around things

May 16, 2014 | Standard (CRT) Televisions

1 Answer

Is there a way to adjust contrast for a lighter picture?


Get into its menu option, surf through, select the picture adjustment window. You can select and adjust the contrast and brightness from here.

Apr 11, 2012 | Sharp 19K-M100 19" TV

1 Answer

I just need to adjust the resolution on this TV. NO ONE at RCA could seem to help me. Thank you.


hi,
did u mean to adjust the picture setting then go for the following
1 press menu on the remote
2. using down arrow select picture quality and press ok. available options in picture quality and its use is listed below. you can use it according to your preference.

Basic Picture Control- Displays the five slider controls for adjusting

the way the picture looks.

Contrast Adjusts the difference between the light and dark areas

of the picture.

Color Adjusts- the richness of the color

Tint Adjusts the balance between the red and green levels

Black Level Adjusts the brightness of the picture

.

Sharpness Adjusts the crispness of edges in the picture.


When exiting this menu, the Save Personal Picture Preset choice list will

appear. You can choose either Yes or No. If you save the settings as a

Personal Picture Preset, the TV will store the settings so you can reselect

them easily if someone changes the settings.

Picture Presets Displays- a choice list that lets you select one of three

preset picture settings: Bright Lighting, Normal Lighting, Soft Lighting

or Personal Picture Preset. Choose the setting that is best for your

viewing environment.

Auto Color Displays- a choice list that lets you turn on the feature that

automatically corrects the color of the picture. (This is especially useful

for tracking realistic flesh tone colors as you switch from channel to

channel.) Choose On or Off, depending on your preference.

Color Warmth Displays- a choice list that lets you set one of three

automatic color adjustments: Cool for a more blue palette of picture

colors; Normal; and Warm for a more red palette of picture colors. The

warm setting corresponds to the National Television Standards

Committee (NTSC) standard of 6500?K.

Video Noise Reduction Displays- a choice list that lets you turn on the

feature that automatically reduces noise from the picture. Audiovariable

enables the TV to automatically adjust noise reduction level;

off turns off noise reduction feature; on-fixed sets a fixed level of noise

reduction.

Dec 21, 2010 | RCA G36705 36" TV

1 Answer

Color went to black and white


You have it hooked up to Analog TV with your RCA jacks. I had the same problem.

Jul 23, 2010 | RCA F19431 19" TV

1 Answer

Tv picture is too dark- worked with contrast and


This sounds like low screen voltage(A1)try adjusting the a1 voltage bottom control on flyback transformer if you have a voltmeter, voltage on crt base possible market screen or A1 shoud be beteen 350/500 volts when making adjustment remember to take into account current taken by meter If voaltage will not adjust flyback transformer will have to replaced

Mar 06, 2010 | Standard (CRT) Televisions

2 Answers

My RCA TV guide words is blurred but the


There are 2 things you try. go into menu to picture setup scroll down to sharpness,back this setting all the off. If this doesn't do it, go to back of the set on right hand side, if you can see focus slot adjust it slightly.

Sep 06, 2009 | RCA F25654BC 25" TV

2 Answers

Ctc 179 service program


No need for the answer I have the setup instructions for the rca tv. I am a tv and computer technician and always carry a sheet with these instructions as I work for company like Sears on tv, projection tv, audio and other electronics, thanks for the help.

Dec 30, 2008 | RCA G35831AT 35" TV

1 Answer

Rca f25432


picture blury problem is due to 1 focus wire loose or disconnected due to long life of connection.this wire is in crt base. 2 focus control mistunned. 3 low voltage on crt electodes. 4 if tv is old then crt is getting weak. 5 crt base or connector loose hope this helps. good luck

Sep 29, 2007 | RCA F25432 25" TV

1 Answer

RCA 32V420T 32" TV


This RCA set uses the CTC187BD chassis. Look on the back of the set and to the right of the cable connector you will see 2 controls sticking out, one on top of the other. The top control is for focus and the bottom one is screen, or overall brightness. If these controls have been turned clockwise then you will have a bright, fuzzy picture with white lines (retrace lines) through it. Tune in a channel with white letters on the screen and turn the top (focus) control until the letters are crisp and sharp. Go into the menu and turn the contrast and brightness all the way down, and then turn the bottom control (screen) until you can just see the picture, just above the point where the picture is too dark to see. Go back into the menu and reset the contrast and brightness and the picture will be back to perfect.

Jun 28, 2007 | RCA 32V420T 32" TV

1 Answer

Picture adjustment questions


*The brightness control setting determines how bright your picture will be. *The contrast control sets the gain of the video circuit. This determines the difference between dark and light scenes. Low contrast settings make the picture "hazy". High contrast settings make the picture more distinction between dark and light scenes. *The sharpness control determine the frequency response of the video circiut. High sharpness settings give better resolution but also shows more noise in your picture. Lower sharpness settings smoothe out the picture removing noise but also fine detail. It needs to be set for the best all around picture. *Picture Enhancement is pre-set adjustments which give you different picture qualities. You just select the one you like. Stargazer

Mar 03, 2007 | Zenith B25A02Z TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...