Question about HP Photosmart C7180 All-In-One InkJet Printer

1 Answer

0xc18a0206 error on hp photosmart printer

This error message is shown on display.What should I do?

Posted by on

  • Anonymous Jun 05, 2009

    0xc18a0206 error on hp photosmart printer

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

0xc18a0206
C7183 ALL IN ONE

Posted on Oct 23, 2008

1 Suggested Answer

Joed911
  • 4338 Answers

SOURCE: 0xc18a0206 error on hp photosmart printer

Fro our Fixya community:

Try holding down the OK, Cancel, Black, and Color buttons all at once. While holding them down, press the On button to power it off (You may need another person if you lack large, coordinated hands). Turn it back on while still holding the other buttons down. You will notice it turn itself off before "booting" fully. After it turns itself off, you can finally let go of those buttons and turn it back on normally. This will force a reset and system maintenance.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Apr 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 0xc18a0206 for HP Photosmart 3310 All-in-One


Hello and Welcome!

The error
0xc18a0206 is mostly occurred in HP printers
To solve the error code
0xc18a0206, Follow the given steps

  • Reset the printer without turning off the printer, disconnect the USB cable from the rear of the printer
  • Remove the cartridges from the printer
  • Wait for the 'Insert Cartridges' message to display on the control panel
  • Disconnect the power from the back of the printer
  • Now wait 60 seconds
  • Now reconnect the power If the product does not automatically turn on, press the Power button
  • Reinsert the cartridges, and then close any open doors on the printer.
  • If you receive a prompt to print a calibration page.Print it
  • Reconnect the USB cable to the port of the printer & then try printing again
Error will automatically remove.
But if u face still this error then printer service required.
In that condition best option is to Contact HP Service Provider

I hope this solution helps you
Thank you for using FixYa

Apr 19, 2011 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

I have a HP C5180, receiving error message 0xc18a0206 Ink System Has Failed. I have replaced all cartridges, unplugged power supply and USB cable for reset and am still receiving error message. Help! ...


Issue An 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution

  1. Press the On button to turn the printer off.
  2. Unplug the power cord from the back of the printer.
  3. Remove all the ink cartridges.
  4. Wait two minutes.
  5. Plug the power cord into the back of the printer.
  6. Press the On button to turn the printer on.
  7. Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved. If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Mar 09, 2011 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

I recieve Ink System failure error message with error code 0xc18a0206 on my HP PHOTOSMART C7180 ALL-IN-ONE PRINTER.


The error that you are having is a hardware issue, it means your printer has an Ink System Failure. Believe me, there's no use going through troubleshooting for this one. Call HP and just Upgrade your printer. HP Printer Tech Support would be more than happy in giving you discounts and an extra year of warranty for $1.00.

Feb 03, 2011 | HP Photosmart C7180 All-In-One InkJet...

1 Answer

I am getting an error message: 0xc18a0206


Hi
This is the proper procedure andif this fails, take it in for service.

Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
Open the cover of the product and remove the print cartridges.
Close the cover and wait for the Insert Ink Cartridges message to display.
Disconnect the power cord from the back of the product and wait for one minute.
Reconnect the power cord. If the product does not automatically turn on, press the Power button.
Open the cover and reinsert the print cartridges.
Close the cover. If prompted, print a calibration page.
Reconnect the USB cable, and try to print a print job from the computer. Source(s): Computer Analyst / Microsoft Certified

Feb 12, 2010 | HP Photosmart D7160 InkJet Printer

2 Answers

0xc18a0206 error on hp photosmart printer


Fro our Fixya community:

Try holding down the OK, Cancel, Black, and Color buttons all at once. While holding them down, press the On button to power it off (You may need another person if you lack large, coordinated hands). Turn it back on while still holding the other buttons down. You will notice it turn itself off before "booting" fully. After it turns itself off, you can finally let go of those buttons and turn it back on normally. This will force a reset and system maintenance.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 01, 2009 | HP Photosmart 8250 InkJet Printer

Not finding what you are looking for?
HP Photosmart C7180 All-In-One InkJet Printer Logo

Related Topics:

6,273 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...