Question about HP Compaq ProLiant ML530 Server

1 Answer

Heat production I need to know how much heat is produced by an ML530 server and a 3com superstack and a compaq storageworks 4100 raid array.

Posted by on

1 Answer

Buy a thermometer

Posted on Oct 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ugrade of DL380 G4 Server HDD Raid Array 36GB --->146GB Required


Do a ghost on the first hard drive install ghost on new hard drive and replace, I can provide more details on procedure just ask

Jul 25, 2008 | HP Compaq ProLiant DL380 G4 Server

1 Answer

Hi does anyone know how to configure the drive array on a compaq ml350?


This model comes with Smart Array 5302/32 Array Controller (Standard with Array Models only) when posting, the server will display the controler mentioned before Smart Array 5302 and an option (press f8) once you have entered this section called ORCA you will have a menu to create, view or delete Raid.
Make sure you have the hdds properly connected before starting so that all hdd are recognized
Good Luck
Mikenet1214@hotmail.com

Aug 13, 2010 | HP Compaq ProLiant ML530 Server

1 Answer

The Dell 2950 Server we have cannot reboot the disc drives


The raid may be fine you need to reinstall the OS.
The best way is to drop the raid array astablish a new raid array then install you new OS on a new raid array.Very nice server you have.

Oct 28, 2009 | Dell PowerEdge 2950 (becwfk1_6) Server

1 Answer

SCSI Devices not detected when posting ML530 Server.....


Hello,

To get to the BIOS for your server, press F10 at start-up. This should get you there to verify if settings are detecting SCSI devices. If they are there, you may have to reinstall the SCSI controller drivers. Good Luck.

Jan 30, 2009 | HP Compaq ProLiant ML530 Server

1 Answer

Problem with scsi driver proliant ml 370 for NT4


Are you attempting to boot from the Windows CD?

If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things.
You need to provide the driver for the RAID controller of the server (this can vary, depending on the version of the ML370 e.g. G4/G5)
If it still cannot detect the hard drive after providing the driver for the RAID controller or if there is not a driver available for NT4, it may not support the controller.
In this case you can remove the RAID set by entering the RAID setup (could be LSI or adaptec). NOTE THIS WILL DESTROY ALL DATA ON THE DISKS THAT ARE A PART OF THIS RAID SET.

Dec 26, 2008 | HP Compaq ProLiant ML530 Server

1 Answer

Run Compaq Array Configuration Utility


Hi Foambob,

Try all means to get a smartstart CD.
Normally new version will be able to use on older hardware , but no guarantees.
I have always found it easier to use smartstart CD auto mode.
You can also do the install and then run ntssd to update all the drivers etc., but I don't recommend it for novices. Use the auto mode , it takes longer but safely and surely.

Good luck

May 21, 2008 | Compaq ProLiant 5500 Server

3 Answers

Drive array problem


Hi Nick ,

As of now you can Select "F2" to accept data loss and re-enable logical drive. This Load OS Normally .
It seems that one of the HDD in the RAID 5 has failed , Did you notice any LED indications like red or amber on the HDDs ?? if so get that hdd replaced . Make sure the Failed HDD is replaced .
You can run the Array Diagnostic Utility from HP System tools to check the Failed Drives and also frimware version of the controller . If the frimware is not latest Update it from HP website. DL380 G4 should have Smart Array 6i controller .

Hope This was Helpful
cheers :)

May 17, 2008 | HP Compaq ProLiant DL380 G4 Server

1 Answer

What is it worth?


Honestly, it depends on the make (g1, g2, g3) and configuration (how many processors, amount of memory, how many disks, type of RAID card, redundant power and if it woks) I remember these machines were pretty bulletproof. Find out the config for each, then you can make a fair comparison using ebay.

Apr 20, 2008 | HP Compaq ProLiant ML530 Server

2 Answers

Compaq Server ML530


I have a basic knoldge.....

Tell me ur problem..

Nov 18, 2007 | HP Compaq ProLiant ML530 Server

Not finding what you are looking for?
HP Compaq ProLiant ML530 Server Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computer Servers Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a HP Computer Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...