Question about Canon BubbleJet i550 InkJet Printer

2 Answers

Canon i550 printer stoipped printing

My canon printer was working fine then it began flashing orange, then flashing green, back to orange, now it won't print at all. I've tried turning it off, tyring to reset it and nothing works..Help!

Posted by on

  • 5 more comments 
  • dynamicdogs Nov 27, 2008

    printer will go to green but before I can print it goes back to flashing orange. I tried replacing the paper and this puts it to green but right back to flashing orange.

  • Anonymous Dec 19, 2008

    Help!

  • horak Feb 04, 2009

    My i550 goes green (solid) then flashes amber 7x then back to green (solid) for 2/3 sec and continues like this. I have tried reinstalling the printer on a different computer, but it still behaves the same and displays as online/ready, then as 'printer not responding' when trying to print. Any suggestions welcome.

  • Dozla Apr 03, 2009

    Where do I find dgpjbp's solution?

  • Anonymous Mar 16, 2014

    My canon pixma iP90v will only flash orange and green. It will not print. When i ask to print something it says the printer is off-line. When I turn off and on the printer it still flashes orange and green alternately.

  • Anonymous Mar 19, 2014

    keep getting 8 orange flashing lights when i turn on printer

  • Anonymous Mar 23, 2014

    FLASHING ORANGE AND GREEN LIGHT

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My cannon printer no longer responds to any commands. I get 4 yellow blinking lights and then 1 green blinker.

Posted on Nov 12, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need help with my i550
When I turn it on the light gives a short green flash, short orange, short green, short orange then longer green
The cycle then keeps repeating
Any suggestions?

Posted on Aug 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

5C00 Error Code as well as yellow and green alternating lights


To fix this error is much easier than it looks. Unplug the printer power. Move the ink cartridge cradle to the left. Over to the right you will see a small pad about 1cm square. This pad and the area around should be covered with ink. Get a cloth and press down on this pad - it's not fixed so should come away with the cloth, otherwise use tweezers gently. Squeeze the pad several times between your thumb and forefinger while inside the microfibre cloth to remove ink build up. Then when not much ink comes out on the cloth, clean the area in the printer around the pad so that looks free from ink too. Then position the pad back in place, move the cradle back into position, plug in and switch on - should work fine now.

Jan 14, 2017 | Office Equipment & Supplies

1 Answer

I have a 324 singer memomatic. Carriage is stuck solid and won't move. It has been stored for a long time. Is it possible to get the carriage off in this instant if so how?


First are you referring to all internal carriage working parts or just bobbin workings ? I just got done last nite with a Kenmore that was sitting who knows how long and was completely froze internally and bobbin area covered with green muck . After cleaning that up still froze ,oiled any and all mechanical points and rocking back and forth about to give up ,found one more location on back of machine ,oiled heavy and began turning very hard over and over and became loose enough for motor to turn . So don't give up . Good Luck .
Regards , Douglas

Jan 13, 2017 | In Office Equipment & Supplies

1 Answer

B&w/gray Scanning Is Okay But Color Scanning Problem


Run ink head cleaner routine. If you cannot the list make and model of printer. Thanks.

Dec 25, 2014 | Office Equipment & Supplies

3 Answers

My Epson WF-3640 is printing with gaps in the text. How do I fix this issue?


Make sure you should remove shipping tape from the ink cartridge. These taps are used to protect printer during shipping but you have to remove it before starting printing. Beacuse these taps prevent the ink to entering in print head. If you will not found shipping tape in your printer then there is terr off strip, remove it. The tear off strip seals the the vent holes on the top of the cartridge to prevent it from drying out on the shelf or during shipping.
After ensuring that the shipping tape has been removed, run the printer's "Head Cleaning" utility to prime the cartridge, then print a test page.
See full detail at- http://guideusermanual.com/product-name-workforce-wf-3640-manual&po=152836&lang=English

Sep 18, 2014 | Epson WorkForce WF-3640 Wireless Color...

1 Answer

Canon mg6150 printer too much pink in photo's when printed


Please calibrate the printer using Canon software.

Mar 08, 2014 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

3 Answers

HP Laserjet 3330. Scanner bulb warming up doesn't go away. I have done the "solution 1" as discribte but nothing is happening. It goes like: - i put the power on, hewlett packard is flashing, the...


How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

2 Answers

Samsung kicked out hp 3in 1 printer already installed


Don't have your HP designated as the default printer (if possible)when you hook up the Samsung. When the Samsung is hooked up it sees the HP is the default printer. Well it can't have that, they discard the HP drivers. What does Samsung care about HP drivers theres only one printer port setup and thats the USB port you have them sharing. So yes you need to get a second cable. Tim

Jan 29, 2007 | Samsung SPP-2020 Thermal Photo Printer

Not finding what you are looking for?
Canon BubbleJet i550 InkJet Printer Logo

1,150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98608 Answers

old marine
old marine

Level 3 Expert

1566 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...