Cannot fast forward with remote

You don't, you just press the FORWARD button on remote during DVD playback to 'fast forward' (pressing this button a second time during playback increases forward scan speed). The forward and reverse buttons have 'SLOW/SEARCH' printed above them on the remote. The other buttons next to them are the PREV/NEXT buttons (SKIP/INDEX).

DVD playback speed/skip/search is mostly a manual user function; it cannot be auto set.

Hi Henry,

1. Usually DVD players DVD players come along with remote controls which have fast forward buttons which have the icon as ">>" .
2. All you need to do , is press the button as per your requirement of fast forwarding.
3. If you press the one, you would get a message as x2 on the TV screen and if you again press it , it would display x3 and if you press the button again it would show x4 , that is the maximum speed you can have usually for fast forwarding.
4. So the solution is to keep pressing the button multiple times to change the fast forward speed.

Hopet his helps ...Your feedback would be appreciated.

Hello,

After searching the best known region hack databases I have found one process for your make and model. I can not assure you that it will work 100% but it's the only known process.

Turn on the Player with no disc on the tray. The tv screen and the dvd lcd will display "No Disk"

2. Press the "Repeat" key on the Samsung remote control

3. Press the keys: "5 7 5 3 8" on the remote. Number 2 appears on the screen for a short time.

4. Press "9". Number 9 is displayed on the screen.

5. Press the "Open/close" button in the remote. The tray will open. Leave it open for a few seconds.

6. Just press the "On/off" button in the remote.

7. You now have a multi-region dvd player!!

I hope this works for you, thank you for choosing Fixya!

no. maybe the sensor has gone bad

Hello, I had the same problem and after spending a few hours reading and trying things, I found a solution. Its very simple. Power on your unit (manually) and then on your remote control push and hold at the same time"enter" and the number "1" while pointing directly to your unit and this should solve the problem. Good luck.

The gas flow jets need cleaned

We already had the inservice. Rather than going directly to Chapter 24 (which is what we watned to do), we just fast forwarded enogh times to know when to stop the fast forward to be near Chapter 24-- it worked. Thanks.

Enter the security code using your Kenwood remote. For the DDX6019
The key sequence to enter the security code KCAR is: on the side of the remote there is AUD, DVD,TV. now enter 55 in the AUD then go to DVD and enter 2 which is fast forward then go back to AUD. Do the same for the rest.
5
5
fast forward
2
2
2
fast forward
2
fast forward
7
7
fast forward

Enter the security code using your Kenwood remote. For the DDX6019
The key sequence to enter the security code KCAR : on the side of the remote there is AUD, DVD,TV. now enter 55 in the AUD then go to DVD and enter 2 which is fast forward then go back to AUD. Do the same for the rest.
5
5
fast forward
2
2
2
fast forward
2
fast forward
7
7
fast forward

The only operations available on the JSI JS4110 without a remote are play, pause, stop, and eject. Since this DVD player "remembers" position of the movie, a different DVD would have to be inserted and played to start that movie over from the beginning. As for fast-forward, this is only available with the remote.