Notification appears every few minutes suggests problem connecting to GPRS
A notification appears every few minutes saying "there is a problem connecting to the GPRS service in your registered home network". I have a restricted SIM from work so do not use the phone for internet connection etc. I only use the hotsync and blue tooth functions. Because this notification happens every few minutes the screen lights up, the buzzer sounds and the battery runs down. Can anyone suggest how I might be able to prevent this notification from occuring?
Re: Notification appears every few minutes suggests...
You need to tap the 3G. Settings. Connections. Advanced tab, Select Network. My ISP drop down. Edit. Tap and hold on anything that appears in the box. Delete. There should be no connections left in the box. Done. Repeat for anything in the My work Network. Edit. Should be empty. IF not, delete any connections by taping on and holding.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Connect your LG Cyon to your computer via it's USB cable.
2. Upon receiving a "USB Connected" notification atop the Notification bar, drag the bar down and select "USB Connected."
3. Now select the option corresponding to "Turn On USB Storage" or connect as "Mass Storage Device"
You should now see a new flash drive or storage device connected to your computer. Browse/Move/Copy/Delete files (including photos) as you would with any other flash drive or thumb stick.
sure. just connect your usb wire the big end to your computer the small end to the phone. then a moment later a notification at the top of your screen appears saying usb connected. then drag that notification menu down and tap the usb connected notification to bring up an option to mount or not mount. choose mount. now on your computer open my computer where you see c drive and d drive. look for removable disk. then click on it and you'll see some folders open the audio or music folder and leave it open. open my computer again this time look for the folder where you keep your music. now when you get there drag music files from you music folder to your g1 audio. it will copy it to your g1 and once you are done unmount your g1 and bring up your music and your new files shoul be in there.
To silence your device In the profile list, perform one of the following actions: • To receive LED notification only, click Quiet. • To receive vibrate notification only, click Vibrate. • To turn off all notification, including notification profile exceptions and LED notification, click Off.
If you mean by downloading straight from the internet from your phone, there is an application called Amazon MP3 that allows you to purchase songs for your G1 and add them to your memory card. You have to be connected to WiFi to be able to do this though. If you want to connect it to your PC to get songs you downloaded from the internet you need the USB cable that came with the phone and connect it to your PC. On the G1 a notification will appear that says USB connected. Just open your notifications, tap on USB connected and select mount. Then your PC will detect it and allow you to view the files on the memory card. Then just copy and paste to your memory card folder.
I had the same issue, however what I DID notice up on top was a USB Connected - the USB icon. I pulled that notification up and it asked me to connect. The exacts are:
1. Plug the USB cable into the computer 2. Plug the USB cable into the phone 3. The notification up top corner left will say "USB Connected" with a USB notification icon - BRIEFLY. The text "USB Connected" will quickly disappear, but the icon is still in the left corner. 4. Pull down the notification andyou'll see "USB Connected - Select to copy files to/from your computer" - Select that notification 5. Notification "USB Connected - You have connected your phone to your computer via USB. Select "Mount" if you want to copy files between your computer and your phone's SD Card." - Select the option "Mount". 6. The "Removable Disk" notification should pop up asking you what you want to do. I select "Open folder to view files".
There is a music folder in there, or whatever else you'd like.
Hello, In response to your email I did accept the advice which actually came though as the same message 4 times.
I already had the manual that the expert was referring to but again on re-reading it there was no solution. Ieventually I rang the helpdesk for HTC which for me was an Australian number. They knew the problems that I referred to. hey could not help on the icon 12# save to say that I should simply leave the phone on al the time. If I travel on the plane I suspect I woud have to set it to Aeoplane mode as I board.
The icon then appears when you take it out of sleep mode and unlock it.
As to the Notification and the white screen, that is apparently a problm that reates to the fact that HTC does not operate in NZ with auto connection to vodafone. It seems to indicate that the phone is automatically trying to reconnect to a network that the bios setup does not recognise. It seems to time out and then the notification disappears and the calndar word appears which is normal.
So I think I have to wait until HTC extends to NZ. Apparently there have been talks with Telecom but as I am vodafone that will not help. However with the closure of CDMA of Telecom HTC will apparently be looking at the GPRS system so I may be OK.
I appreciate your help. If there is anyone out there who can add more or knows of a solution setting I would be pleased to hear from them.
To set an alarm for an event:
1. Create a new event or double-click an existing event.
2. In the New/Edit Event dialog box, select the Alarm check box.
3. Click the time interval selector and select Minutes, Hours, or Days.
4. Type a number between 0 and 99 in the Time Measurement box.
5. Click OK.
To set a default alarm for all new events:
1. From the Tools menu, choose Options.
2. In the Options dialog box, click the Date Book tab.
3. Select the Alarm Preset check box.
4. Click the time interval selector and select Minutes, Hours, or Days.
5. Type a number between 0 and 99 in the Time Measurement box.
6. Click OK.
Setting Alarm Options
You can configure the Alarm Manager settings for the Desktop application in the Alarm tab of the Options dialog box.
To set Alarm options:
1. From the Tools menu, choose Options.
2. In the Options dialog box, click the Alarms tab and click one of the following actions:
* Always available: Click this option if you want alarm notifications to appear regardless of whether the Desktop application is running.
* Available only when Palm Desktop is running: Click this option if you want alarm notifications to appear only when the Desktop application is running.
* Disabled: Click this option if you do not want alarm notifications to appear on your computer.
3. If you want an alarm tone to sound when the alarm notification message appears, click Play audible notification with alarm dialog.
4. Click OK.