Question about Siemens SpeedStream 4200 (13A4200001) Bridge

1 Answer

Static Ip with Speedstream 4200 Modem

Windstream is the ISP.

I have ADSL telephone line connection coming into the Modem, Modem then connects to Router ( Belkin F5D7321-4 Wireless G plus ) then router is wired to my two pc's.

I can set a static windows IP, but with windstreams PPOE connection, the adsl modem/router (4200 speedstream) I always get an Internal IP (static IP) and an External IP which is what is put out by the Speedstream 4200.

1. Can I get the Modem to Be a signal Converter only, not generate its own IP.
2. How and what steps do i need to follow to bridge modem to router if needed and what needs to be done prior to putting modem in bridge mode. Last i tried to bridge I could not connect to internet once modem was bridged. Please let me know what to do.

The Bottom line is I want to Host and Join Games via Gamespy Arcade, which with the network as is I can not do.

Thanks For Looking deep into teh equipment and Finding a knowledgable fix ahead of time.
J.R.

Posted by on

  • Anonymous Oct 19, 2008

    I would like to have firmware to set up my SpeedStream4200 ADSL Modem to be Router . Please send that file to my Email address : paisarn.c@egat.co.th



    Thank you.

    Paisarn

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

I am assuming here with the way you have it set up your getting an internet connection.
what you saying i understsand mostly so i'll see if i can help you
first of all you have speedstreem modem that connects to you isp, this is assign your internet address from the isp if you paid for a static IP it would be in here, if not it's assiged by a dhcp from your isp company so if you if turn it off or have a power loss for anymore than 5-15min your ip changes.
now your modem then connects into your belkin router this as well as your modem it's prob set up as dhcp so it wants to issue each computer with an internal address of 192.168.0.X the reason for this is so it knows where to send the incomming information to what computer.
no matter what computer your using the address that goes over the internet will be the one assigned to modem from internet provider so if this need to be static IP to run your game server you will have contact your internet provider for an address.
but you may be confussing the issue a little, my suggestion to you would be:
1. go to your connections on each computer
2. right click on the lan connection choose properties
3. go to internet protocol (TCP/IP) then click properties
4. then click on obtain ip automatically and obtain dns automatically
this will remove the static windows address you may have put in.
try this and see if you can get you game or game server will work.
btw you may have to reboot your computers after this to get be sure to get the new address.

Posted on Oct 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SPEEDSTREAM 4200 MODEM CONNECTED TO WRT54G ROUTER WIRELESS DONT


turn on the wireless option in the router...
plug your computer into the router type in
192.168.1.1
username: admin
Password: public

go to wireless tab
turn it on

END!
P.S.
Also you have to be in range!

Sep 25, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

No activity on my new speedstream 4200


Ethernet and DSL lights are indicating you have ADSL available on your line, and that you have computers connected to the router.

What has probably happened is that Optus did not set up the new router with your username and password. Go to thw following website for details on how to setup the modem.

http://help.optuszoo.com.au/help/dsl/connected/windows/optus_modems/speedstream_4200



Manual Modem Settings The Optus DSL Broadband self-installation CD configures all the necessary settings for your DSL Broadband service. You do not need to manually configure your modem if you have run the self-installation CD. While the following information is provided for your reference, using the self-installation CD is the recommended method for configuring your modem.
The Siemens SpeedStream 4200 ADSL modem can use either USB or Ethernet to connect to your computer.
  • If you are connecting via USB you will need to run the self-installation CD to install the USB driver before you connect your modem. The Siemens SpeedStream 4200 ADSL modem supplied by Optus has been customised for the Optus DSL Broadband service. Only the USB driver supplied on the self-installation CD will work with the Optus service. If you do not have the self-installation CD, you can download the latest drivers from the Siemens website.
  • If you are connecting via Ethernet it is possible to manually configure your modem without the self-installation CD. Only a web browser is required.
After connecting your modem there are two key steps to manually configure your modem for the Optus DSL Broadband service:
  • PC settings - Configure your computer's Ethernet network interface.
  • Configure Your Modem - Set the password in your modem's configuration pages.
top
PC Settings Step by step instructions are provided for each of the supported Windows operating systems:
  • Windows 98/Me
  • Windows 2000
  • Windows XP
  • Windows Vista
top
Configure Your Modem To configure your modem settings you must now access the configuration manager using your web browser. This is done by entering the IP address in the address bar of the browser window as follows:
Note: If you are updating the password in your modem, please complete steps 1 to 3 only.
Step 1 of 5
  • Enter http://10.1.1.1 (Default IP address of the Optus Supplied Siemens SpeedStream 4200) to access the modem Configuration software. You may wish to add this page to your Favorites for easy access later.
  • The following modem System Summary screen will appear.
ss4200_home_disconnected.gif Step 2 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click PPP in the list of options that appeared below the word Setup.
  • The ISP Password page will appear:
ss4200_ppp.gif
  • Replace the default username (john_citizen@optusnet.com.au) with the username provided for you by Optus DSL Broadband.
  • Replace the default password with the password provided by Optus DSL Broadband in the Password field.
  • Note: You will find your Optus DSL Broadband username and password on the letter you received with your self-installation kit.
  • Save these details by clicking the Save Settings button.
Step 3 of 5
  • The next screen will ask you to disconnect and reconnect to the Optus DSL Broadband service.
ss4200_ppp_reconnect.gif
  • Click the link to return to the System Summary page.
ss4200_reboot_3.gif
  • Click the Disconnect button to disconnect the modem from the Optus DSL Broadband service. The text on the button will change to Connect.
ss4200_home_disconnected.gif
  • Click Connect to reconnect the modem to the Optus DSL Broadband service.
Step 4 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click the word Mode in the green menu of options on the left side of the web page.
ss4200_mode.gif
  • Confirm that Optus Bridge is the selected operation mode.
  • If Optus Bridge is not selected click the radio button next to Optus Bridge to select it.
  • Click the Apply button.
Step 5 of 5 ss4200_reboot_1.gif
  • Click the Reboot button to restart the modem using your saved settings.
ss4200_reboot_2.gif
  • After about a minute the modem will return to an operational state and connect to the Optus DSL Broadband service.
ss4200_reboot_3.gif Once the modem has rebooted and the ADSL connection has been successfully established the DSL LED indicator will light steady green.
Your modem is now connected to the Optus DSL Broadband service.

Jul 25, 2009 | Siemens SpeedStream 4200 (13A4200001)...

2 Answers

Can't get a wireless router to work with a speedstream 4200


This may actually be an issue with your ISP. There is a good possiblity that your ISP has bound your connection to the MAC address of the network card on your computer. This is a common occurance which is why router manufacturers give you the option of having your router clone your computer's MAC address. Go into your router's management an perform the clone, sorry I cannot give you more details but I don't know the specific model of your Belkin router.

Jan 05, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Siemens Speedstream 4200 NetComm V300 on VOIP


When the V300 Line/Phone led flash in alternating fashion, it's telling you it's WAN connection is dead. The WAN light is off too. so internet and VoiP phone will not work

When the V300 Line/Phone led flash in sync, it can't register to the SIP server.

The V300 does not appear to be listed on the Mynetfone website though. Have you checked to see that your V300 has the latest Firmware. LINK

It may be that the V300 is not getting it's IP renewed. Can you alter the IP lease time? Do you have the V300 set up for PPPoE, or do you have it set to static or DHCP (refer CH4, page 25)

Jul 01, 2008 | Siemens SpeedStream 4200 (13A4200001)...

6 Answers

Placing Sppedstream Modem 4200 in bridge mode


http://192.168.254.254/brgmode.html ...or if they have the gay firmware >.> go to http://speedstream/brgmode.html then click apply....now set your router to log in with your user information with a PPOE login...if your like me and using the dlg-4500 just go to setup and do internet wizard to set up easily...then your ready to go... it can take up to 10 minutes for your router to configure so give it time..and if it doesn't seem like it's working in that time...try cycling your power then check again...and if still not working, do a hard reset (hold reset till lights alternat from green to red) to reset to factor default (do it for your router too becfause it will still be set to sign into your isp for you)

Jun 14, 2008 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Speedstream 4200 dsl modem


If you will have the new modem and the same problem will occur, then you can say that it could be a fault with the phoneline or if it is with the old modem.

May 19, 2008 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Cant connect to "SOUL" adsl


First, just so you know, some devices (modems) just will not work on a provider's (ISP) network.. did you call your Internet Provider and ask it this device is compatible?

When you updated the firmware, did you receive any messages about failures? any messages at all?

Dec 22, 2007 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Static ip address


It is a ADSL Modem. It should have all ports open. In order to set a EXTERNAL static Ip address, you would have to call up your ISP and ask for a static IP address.

Aug 25, 2007 | Siemens SpeedStream 4200 (13A4200001)...

2 Answers

Cant connect my router


what is the source of your connection thru telepon line or a broadband connection or DSL?i need to know this........

Jul 16, 2007 | Siemens SpeedStream 4200 (13A4200001)...

Not finding what you are looking for?
Siemens SpeedStream 4200 (13A4200001) Bridge Logo

731 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Network Bridges Experts

john smith

Level 2 Expert

366 Answers

Tony

Level 3 Expert

2598 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Siemens Network Bridge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...