Question about Lexmark X2600 InkJet Printer
I just hooked up my Lexmark x2600 printer and now everytime I try to print something, the paper gets fed into the printer about a quarter of the way, then the printer just wrinkles it and crumples it up and stops feeding it.
The paper is straight and the printer is on a level surface and that is all that the manual told me to do in order to get it to work again but it is still not working.
Is printer new i would take it back if u can if not go lexmark.com download ther latest driver ok may fix it up best u can do try feeding paper throw it fe w times train it
Posted on Oct 09, 2008
Tips for a great answer:
cause of paper jams is debris/foreign objects that accidentally fell into the
paper feed area. Please follow steps below to fix the problem:
the sheets of paper from the feeder.
2. Grab a
flashlight and look inside the feeder for any debris or foreign objects.
you're willing and physically able, you may also turn the printer over. Any
debris should just freely roll out from the feeder.
feeder is clear, place the printer back on the table, open the printer cover
and remove the cartridges.
the cartridge area for any obstructions/debris in the cartridge carrier's path
or the paper path.
cartridge area is clear, close the cover.
your printer. Pull out the power supply, black box where the power cord is
plugged in at the back of the printer, and put it back after 30 seconds.
the printer turns on, reinsert the cartridges and load some paper. Try to print
a document again to verify that the problem is fixed.
If problem continues, please contact Lexmark Technical Support Center for additional assistance.
Sep 03, 2011 | Lexmark X2600 InkJet Printer
Jul 24, 2011 | Lexmark X2600 InkJet Printer
Jun 28, 2011 | Lexmark X2600 InkJet Printer
Dec 04, 2009 | Lexmark X5470 All-In-One InkJet Printer
Jul 08, 2009 | Lexmark X2600 InkJet Printer
May 03, 2009 | Lexmark X2600 InkJet Printer
Mar 19, 2009 | Lexmark X4650 InkJet Printer
Mar 31, 2008 | Sharp AL 1631 Copier
299 people viewed this question
Usually answered in minutes!