Question about Hoover U6630-900 WindTunnel Bagless Upright Vacuum

1 Answer

No power to Hoover Wind Tunnel Vacuum

All of a sudden, my vacuum will not work. When turning on, sometimes it attempts to power on for a second or two but mostly it does nothing. The switch clicks so I do not think it is the switch. Maybe it is the cord. Is it possible to replace ?

Posted by on

1 Answer

The problem is likely the switch a shot of wd40 should fixed it

Posted on Oct 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canister vacuum Sears model 116.59229210. The suction is coming through the vac for the hardwood floor setting, but the light on the power head will not work and the roller is not turning. I have...


Kenmore canisters are famous for melting the connection between the hose handle and the upper wand. They also sometimes melt between the lower wand and the power nozzle neck. Take it to your local vacuum repair center and get a diagnosis.

Dec 19, 2014 | Vacuums

1 Answer

Bissell bagless vacuum just stopped working


the most likely to be overheated the motor, or cut the cord.
for the first unplug the power supply and let it COLD, ALSO CAN SWITCH AUTOMATIC OVERHEATING or proving or proving MANUAL. for the second take the machine to an electrician to check out the cable.

Nov 28, 2013 | Bissell PowerForce Helix Bagless Upright...

2 Answers

My hand held Dyson vacuum will not charge. Every time I attempt to us it I get 3 charge light on the side flash?


My same symptoms are - after starting charge, Red light is on, then second light turns On. Then for a long time nothing happens. And later I have all three LED flashing.
I replaced battery and nothing changed.

Imeasured Power Supply voltage and found it 24.2v instead 28v as it stated on the label.

I opened it up and found that the three-lid chip marked 431 is faulty.
431 is a voltage shunt, which sets and controls output voltage.
You can use AIC431CUS or TL432 (TL431 has different pinout).
I replaced mine and volatge back to 28.25v and charger is now working as it should.

You can also use any TO-92 431 chip - there is enough room for it.

Good luck!

May 19, 2010 | Dyson DC16 Root 6 Bagless Handheld...

1 Answer

While vacuuming a rug on high (carpet setting) the power suddenly decreased. Now it will only run with low power, not picking up items on carpet


It sounds like you burned the belt. Turn the unit over, remove the cover plate where you see the brushes. On the side of the brush roller is where the belt is located. The belt should be very tight on the roller. Also, you may see little black rubber pieces stuck to the area where the end of the roller is or in the part where the belt runs. Get your owners manual out and read how to change the belt. I'll bet when you ran over the carpet it hung on some of the nap and hung the brush roller up for a second or so. That's all it takes sometimes to fry the belt on some vacumes. Sometimes new vacumes come with a new belt. Look in the bag or box and install it.

Mar 08, 2010 | Eureka 2991AVZ Bagless Upright Cyclonic...

1 Answer

Not working  I hit the switch and there is no sound of a motor.  Nothing is happening.  It was working seconds earlier and suddenly it stopped.  The plug was in and I replugged it into...


If it was just a broken belt you would still hear the motor running. most likely its in your cord or switch. check the main cord, connections to the switch, and also the motor supply cord that goes from the handle to the vacuum head.

Feb 26, 2010 | Oreck XL Ultra Bagged Upright Vacuum

2 Answers

I have the electrolux epic 6500 sr. when i


As hooton8 stated i have the electrolux epic 6500 sr. as well and when i attempt to vacuum i turn it on and it turns off after about 3 seconds. new bag nothing stuck in tube. I turned dial to the right all the way. Works when hose is not connected..hose is clear.

Dec 05, 2009 | Electrolux Epic 6500 Vacuum

1 Answer

Kenmore vac won't shut off, blowing heavy air from vent


For the stack of problems you have, it sounds like it be best for you to ditch it and get a new vacuum. The heavy problem sounds like a motor issue. The burning smell is most likely from the belt being loose on the power head.

Economically, you should just get a new one instead of replacing the whole system guts

Aug 14, 2009 | Kenmore 25512/ 25513 Progressive Canister...

1 Answer

Bissell won't turn on


the motor could be ceased up. do you hear a buzzing noise? if you dont hear a buzzing noise, turn it on for about 1 minute, unless it starts smelling hot or starts smoking. if nothing happens after that, try replacing the power cord.

Feb 01, 2009 | Bissell 6594 PowerForce Bagless Upright...

1 Answer

Will not start at all


most likely if it dont turn on at all period.1 of 2 things on/off switch went out or 2 motor burned up but most time u can tell if it is bad motor cause if it smelt like burnt plastic ever bad news its dead but hopefully u can just change switch

Dec 15, 2007 | Kenmore 31913 Progressive Direct Drive...

Not finding what you are looking for?
Hoover U6630-900 WindTunnel Bagless Upright Vacuum Logo

1,324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...