Question about Jenn-Air 34 in. Expressions CVGX2423 Gas Cooktop

1 Answer

Ignitors all quit working.

Model # CVG2420B
They all worked perfect, they all quit at once. The exhaust fan works great, the cook top is plugged in. We are doing some tile work to the wall behind the cook top and we had a small throw rug on top of the cook top to protect it from dust. But there was never any pressure or stress on the controls. Is there a fuse? A breaker? No electrical or wiring has been disturbed or changed during any of this work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am solving the same problem on my thermador cooktop now. From what I can tell there is an electrical box inside the unit that generates the spark. called the ignition control unit or ignition device. I bought a new unit at http://wwaparts.com/index.php and had it on my doorstep the next day. The next trip is taking off the burners to get inside your cooktop so you can replace it.

Posted on Oct 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The electronic lighter will not quit clicking.


Hello, Thank You for using FixYa. I will be helping you today. Did you clean the cook top or spill something? If the switches get wet they will click untill it drys out. If not then one of the switches failed and would need to be replaced. Its the switch that sits on the burner valve.
Thank You and please ACCEPT my answer and Rate my answer if it was helpful..

Jul 01, 2011 | Maytag Cooktops

1 Answer

Thermador cooktop ignitors won't stop clicking


I have the same range top. I am looking for the switch assembly. Do you know where I can buy this part? Please email me if you do. prboardman@yahoo.com

Dec 30, 2009 | Cooktops

2 Answers

G.E Profile gas cook top #JGP640 ignitor.


It is sparking because the module does not sense the heat which would normally cause the sparking to stop.

It can be caused by a poor ground, make sure the ignitor at that burner is clean and free from any obstructions. If it is then it could either be a defective ignitor or spark module.

Mar 12, 2009 | GE Cooktops

3 Answers

Wiring problem


those wires dont go to the down draft. those colors are to hook up the stove. do you have the instalation instructions?

Nov 09, 2008 | Jenn-Air JED8430 Electric Cooktop

2 Answers

Ignition does work - stove top doesn't light


Please provide model number so that I can tell you what to do for this unit.

Oct 29, 2008 | Thermador Cooktops

2 Answers

Jenn-Air electric stove top - burners/fan won't come on


you may have lost a leg of your 240V service. make sure you have 240 to the appliance and then start chasing down where you lost it. there is no onboard trip or reset on this unit

Apr 20, 2008 | Jenn-Air JED8230 Electric Cooktop

1 Answer

Jenn Air Not Exhausting During Grilling


is this down draft cook top or give me the m# thanks

Jan 13, 2008 | Jenn-Air JED8230 Electric Cooktop

1 Answer

JENN AIRE CVGX2423 COOK TOP


short in the fan wirring.. it is not easiy fix . you need to replace the fan and short wieeing.

Dec 19, 2007 | Jenn-Air 34 in. Expressions CVGX2423 Gas...

1 Answer

Dacor SGM304... no ignition


There is no fuses, as long as you have a power supply into unit then the only item that can cause this fault is a faulty spark generator.the hob will need to be dismatled to repair, remove the knobs, remove the burners and then remove the obvious screws, top will lift off Regards Advisor

Sep 01, 2007 | Dacor Preference SGM304 Gas Cooktop

3 Answers

Jenn-Air Gas Cooktop Model CVGX2423


you will need to contact your certified local service tech.you might have a distributor problem at yor ignitor box.if the problem is not with your ignitors.

Jun 30, 2007 | Jenn-Air 34 in. Expressions CVGX2423 Gas...

Not finding what you are looking for?
Jenn-Air 34 in. Expressions CVGX2423 Gas Cooktop Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

meztang
meztang

Level 2 Expert

112 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...