Question about Computers & Internet

1 Answer

Password and username setup

I am changing internet providers from supernerd to bigbond and I have a billion modem not a telstra one, I need to setup new username and password so I can connect to bigpond tomorow 10.10.08. Please can someone help me with this as I know nothing much about computers and have no idea how to do this. Your help would be very much appreciated.
Many thanks,
Merrynlord

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Hi merrynlord to connect a bullion to bogpond you must enter the modem set up you do this by opening an internet browser IE or Firefox for instance then type in the address of the modem that should http://192.168.1.254.
Once this is done you will have to enter a user name and password if you changed this when you setting up for supernerd then you will have to use the one you created, if not then the default is
user = admin password = password.
on enter these you should then get a page with a menu on the left, here click on quick start, click
PPoA then enter 8 for VPI and 35 for VCI....altho these settings should already be in there...so baically check them, leave NAT enabled, leave the IP subnetmask and DSN all blank, then where it says username type in your new Username from bigpond and the new password. click apply then click save, and your modem should then connect to bigpond and get all the settings it requires.
If this doesn't connect you let me know.

Posted on Oct 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change my password


In your internet browser navigate to 192.168.0.1, username/pass is admin/admin or admin/password - Wireless settings - Change the SSID text and enter a new password in the WPA encryption

Sep 25, 2014 | NetComm Telstra Bigpond 3g9wb 3g Wireless...

1 Answer

How to program to my new enternet connection


HEllo bro...

I don't know what model that use, however here the best explanation for you..

-------------------------------------------------------------------------------------------------------------
Preparation:
1. Username and password for router.
2.Username and password for provider internet.
3.Ethernet cable (rj45 connection)
5. Pc /laptop to setup router ( on step i'm referred to pc)
4. Web browser( more preferred to using internet explorer current version)
---------------------------------------------------------------------------------------------------------------

Step:
1. Plug Ethernet cable to router
2. Plug another end Ethernet cable to pcthat you are using to setup
(Now you have cable was connected between pc and router)
3.Switch on the router.
4.Open web browser. Or click here http://192.168.1.1
5.Some window will popup
6.Enter the username and password for router. If default( mean you don't change username or password,you can leave blank for username and fill password with "admin")
If still can't enter try search at google with your model and brand for username and password default.
7.After success enter, then using the wizard .
8. Fill the username and password for provider.
9.FInish.
-----------------------------------
For step 7th, to 9th, you can directly go setup internet connection( depend to model, sometimes it just type setup) where you will find ppp username and ppp password.. change it..
Good luck and be careful. sometimes you make it right but router need time to create new connection..
For the best go here Lynksis setup

Jul 06, 2011 | Linksys Cable Modem

1 Answer

My comcast modem's internet connection just died a while ago the only light that is on is the power light, and i have rebooted the modem already. how can i fix this?


You need to hard reset your modem. By doing that, unplug the modem from the power outlet. Look at the back of the modem, you will see there a small red button. You need to press that button. You need to get a pin or pen to press that reset button. Press the reset button for 5 mins. Monitor the power light. It will change to orange light and it will restart. Once it restarted, you can release the reset button and wait for the lights to come up. Since you did the hard reset. You need to configure the modem with your username and password from your ISP.
You need to access the gui or firmware of your modem. If it ask for username and password. This is the time you need to contact your ISP. They will help you to configure the modem. Once they provided you the username and password ofr your modem. Write it down so you will have a copy and in case it happen again you know what to do. Username and password for the modem is different from the username and password for your internet. You also need to enter the username and password for the internet so you can use the internet. If you get a red light for the internet, that means the username and password is incorrect.
If this didnt work. You need to replace your modem.

Apr 05, 2010 | Arris SB5100 SURFboard DOCSIS 2.0 Cable...

1 Answer

Problem with gateway modem.Power light is red wireless light is green,Dsl and Ethernet lights are not on.I have turned everything off and back on.I have disconnected everything and put it back.Nothing...


You need to hard reset the modem. By doing that, unplug the modem from the power outlet. Look at the back of the modem, you will see there a small red button. You need to press that button. You need to get a pin or pen to press that reset button. Press the reset button for 5 mins. Monitor the power light. It will change to orange light and it will restart. Once it restarted, you can release the reset button and wait for the lights to come up. Since you did the hard reset. You need to configure the modem with your username and password from your ISP.

You need to access the gui or firmware of your modem. If it ask for username and password. This is the time you need to contact your ISP. They will help you to configure the modem. Once they provided you the username and password ofr your modem. Write it down so you will have a copy and in case it happen again you know what to do. Username and password for the modem is different from the username and password for your internet. You also need to enter the username and password for the internet so you can use the internet. If you get a red light for the internet, that means the username and password is incorrect.

Mar 07, 2010 | 2wire (1000-000057-000) Modem

1 Answer

Power light red


You need to hard reset the modem. By doing that, unplug the modem from the power outlet. Look at the back of the modem, you will see there a small red button. You need to press that button. You need to get a pin or pen to press that reset button. Press the reset button for 5 mins. Monitor the power light. It will change to orange light and it will restart. Once it restarted, you can release the reset button and wait for the lights to come up. Since you did the hard reset. You need to configure the modem with your username and password from your ISP.
You need to access the gui or firmware of your modem. If it ask for username and password. This is the time you need to contact your ISP. They will help you to configure the modem. Once they provided you the username and password ofr your modem. Write it down so you will have a copy and in case it happen again you know what to do. Username and password for the modem is different from the username and password for your internet. You also need to enter the username and password for the internet so you can use the internet. If you get a red light for the internet, that means the username and password is incorrect.

If this didnt work. You need to replace your modem.

Feb 16, 2010 | 2wire (1000-000057-000) Modem

1 Answer

CANNOT GET INTERNET TO WORK... SHOWS ALL


If the internet light is red, it means that the modem is not getting the connection from your ISP.

To verify the settings, just access the setup page using a web browser. Type 192.168.1.1 in the address bar.

By default the username is admin and the password is password.

If this doesn't work, try admin for the username and password. If still not working, you will need to reset the modem.

Once on the setup page, go to Configuration.

If you have a PPPOE connection, make sure that the username and password provided by your ISP is correct on the firewall.

If you have DHCP, the modem should be in bridge mode.

I hope this helps! Good luck!

Jan 11, 2010 | Westell Wirespeed LiteLine 6100...

1 Answer

The modem's been changed and cannot locate the CD to the driver to connect to the internet. The model is DSL-G604T/AU V.A3.


Hi! your dlink dsl-604T is adsl router modem, you can access the setup page of your modem router by connecting your computer directly to the port1 of the modem router and the cable from your isp should be connected to the WAN port. u need to pull up the browser and type in at the url:192.168.1.1 and it will ask the username and password, by default the username is admin and the password is 1234 or leave it blank, but i suggest before u do this steps. u need to reset your modem/router. there is a reset button on the back of the router and press it for 20secs and then unplug and replug it after 10secs. after that u can pull up the setup page of the router.. to check the default gateway of the router, right click the network icon on the lower right of the task bar and select status and it will show the ip address, subnet and default gateway..

u need to know what internet settings u have with your internet provider, bcoz once u access the setup wizard it will ask u the type like auto-dhcp, pppoe, static etc.. if your isp gives u a username and pass to connect to internet u have to select pppoe or if u are given a static ip address setting u need to select static ip... just follow the setup wizard..

Aug 17, 2009 | D-Link DSL-G604T Wireless Router

6 Answers

Connecting my westell 6100 modem to my router


i there ;
the solution for ur problem is :
> As ur isp is verizon so they must have provided wu wuth a username and password ...
> Open the routers page 192.168.1.1 ...
> Instead of automatic configration click on pppoe ...
> type in username and password for more help contact technical support at 1866-283-6613 . i hope this will help Linksys Tech support

Dec 09, 2007 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...