Question about Jenn-Air JDB6510 Built-in Dishwasher
It sounds like there is something lodged down somewhere in my dishwasher as it is making a loud buzzing sound when it the arm is turning while washing, the dishes are clean, it is still working, but can i fix this myself, will i damage the machine by running it?
I had the same problem with by Kemore Ultrawash after two years. The motor bearing went bad because the seal went out and dish water got to the bearing. If you are handy, this motor comes out after taking the dishwasher out. I was surprised how easily the motor came apart from the dishwasher, a good design. The motor has three screws that holds it together, I took them out and took the motor apart.
I took the old beaing off the shaft with a grinder, careful not to groove the motor shaft. I did, but just put some high temp silicone caulk in the groove before I put the new bearing on the shaft. I bought a new bearing on the internet, it is a 22mm x 8mm x 7mm. I bought one that went in a small engine, a quality one. I placed it on the shaft, put the motor back together and put the dishwasher back together. It has run quiet and great for many weeks now. I expect the dishwasher may last many years now, because the bearing I took out was a cheap aftermarket one, and the new one is vastly superior in quality.
Good luck and fire away with any questions. I love this dishwasher and am glad I could fix it for 19$ and some of my time.
Posted on Nov 08, 2008
Several sites on the Internet suggest doing some basic disassembly on the inside bottom of the dishwasher to locate and remove fragments that may be interfering with the cutter blade of the built-in chopper. Much like a garbage disposal, most dishwashers chops up larger waste particles to be able to flush them down the drain.
I have a 2-year old Kenmore and followed these directions to locate and remove a tooth pick as well as some plastic/alumimum fragment of a medicine pill tablet. Unfortunately in my case this did not resolve the noise issue. Having found these 2 fragments I didn't investigate further and reassembled the 4-5 pieces I removed. All together it took me about 20 minutes to do this. I am leery to call-in a service professional as the dishwasher is working, albeit a noisy.
Posted on Oct 22, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 28, 2012 | Kenmore Washing Machines
Jan 25, 2012 | Kenmore Dishwashers
Jan 12, 2010 | Kenmore 24 in. 17482 / 17484 / 17489...
Oct 25, 2009 | Dishwashers
Aug 30, 2009 | Frigidaire Dishwashers
Jul 30, 2009 | Dishwashers
Feb 21, 2009 | Dishwashers
Jan 26, 2009 | Kenmore 24 in. 17482 / 17484 / 17489...
Oct 07, 2008 | Jenn-Air JDB6510 Built-in Dishwasher
May 21, 2008 | Kenmore 24032\24036 Top Load Washer
8,696 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: