Question about Lexmark Office Equipment & Supplies

2 Answers

I HAVE MISPLACED THE DISK FOR INSTALLING MY LEXMARK 3500 4500 PRINTER AND I NEED TO REINSTALL IT CAN YOU HELP ME

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 781 Answers

You should be able to download the drivers from lexmark's website
http://downloads.lexmark.com/perl/downloads/downloads.cgi

look for the printer you have and look for drivers that match your operating system.
post back if you have any problems.

Posted on Oct 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

Http://downloads.lexmark.com/perl/downloads/downloads.cgi#

go to lexmark and find appropriate downloads...good luck

Posted on Oct 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot launch lexmark productivity studio nor can I get my X2650 to scan. It will print and copy


Hi.

If you cannot start the Lexmark productivity studio, then the software may need reinstalling.

Reinstall the software using printer disk, or download from Lexmark website.

Also test using a replacement USB cable. A too long or defective USB data cable may cause the AIO not scanning.

If you have misplaced printer disk, follow instructions on link below to download drivers:
How to install a Lexmark printer when the...

Dec 11, 2009 | Lexmark X2600 InkJet Printer

1 Answer

Lost disk that came with printer lexmark 2500 series.


Hey,

The lexmark drivers and software required for installing the printer is available at www.lexmark.com

Select Drivers & downloads then driver finder.

Type in your model x2350 for example

Select your windows version

Download the setup program.

1.Download software
2.Run the downloaded setup
3.Plugin the printer when asked
4.Done

Thanks,
Ekse

Jun 07, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Misplaced disks to download programs for printers


If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:some printer does not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

Mar 04, 2009 | Lexmark Office Equipment & Supplies

1 Answer

Adding a printer without the software


Maybe.If the windows has that model shown you can. Or download the driver and install it:No VISTA driver available. Try installing forst w/o a disk by doing the following :
START - CONTROL PANEL - PRINTERS AND FAXS - IINSTALL PRINTER- When it askes if you have the disk , say no. 

http://support.lexmark.com/perl/support/support.cgi

Jan 19, 2009 | Lexmark X1240 All-In-One InkJet Printer

2 Answers

Printer


If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then ifyou get in troubles, followthe instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:someprinterdoes not work on Vista, if you do not find any driver downloadfor Vista on your model page, that means your model is not Vistacompatible.

Oct 21, 2008 | Lexmark Z735 InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...