Question about Panasonic KX-T7731 Corded Phone

1 Answer

KX-T7731 messed up the co button

Help!! I was trying to program the speed dial function on my phone and now the co 01 won't pick up the outside line (which it was originally assigned to) I used to be able to lift the receiver and co-01 would light up now nothing.  Thanks in advance for the help.

Posted by on

  • 2 more comments 
  • elmassian Oct 09, 2008

    Carl I LOVE YOU!!!  

    PS I have the manual  Still can't figure out the one touch dialing :-( or the intercom one touch for that matter

  • isela425 Oct 23, 2008

    I have the same problem. I was trying to set up a speed dial and I messed up my line one only i have the KX-T7433 Panasonic phone.

    So your instructions for the other post did not work for me. Can you help?

  • elmassian Oct 31, 2008

    Hey Carl 

    I am still having trouble setting up the speed dial buttons I am following the directions on page 157 in the link you sent me. I can't figure how to set it up so the co is in front of the phone number.
    This is what I am trying to do:
    Program, co, 01, 2, 1818903.... store , program

    I am getting a double beep after the "2" and it won't let me continue.

    What am I doing wrong?


  • Anonymous Jan 12, 2009

    I can not get the speed dial programmed - please help



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Panasonic Master
  • 2,460 Answers

Remember that PROG 13 you pressed? First, press PROG and touch CO-1's button and make sure it still say CO-1. If not, dial 01 STORE and it will become CO-1 again.

Now, pick up the handset and hang it up so you clear the phone and press PROG 13 1 STORE PROG

Easy when you have the manual :-)


Posted on Oct 08, 2008

  • 1 more comment 
  • Carl Navarro
    Carl Navarro Oct 09, 2008

    Thanks for the rating. The button programming is in the manual. If you have a TA system, this manual will work

    Page 157 lists what you can do with the buttons and how to program them. The high spots are 0 for CO, 1 for EXT and 2 for speed dial. Because the PF buttons can only program speed dial, the "2" is assumed.

    If you get confused don't hesitate to write back!


  • Carl Navarro
    Carl Navarro Oct 31, 2008

    The right side buttons already have a "2" assumed, so you press the button and dial "9" plus your number then STORE. If you are using left side buttons (don't do it!!), then you dial 2 + 9 plus the number. You may also substitute 8x codes for 9 if you want to dial out on a specific line.

  • Carl Navarro
    Carl Navarro Oct 31, 2008

    islea425 the programming is the same....after you dial PROGRAM 99.




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

CO 1 cannot call out or receives incoming.

Panasonic KXDT321 Phone
Conference call Call party 1 and speak
Press transfer
Call party 2 (press 9 for outside line if needed)
Party 2 answers
Press transfer then 3 speak to all three people
Repeat if required

Jan 24, 2014 | Panasonic KX-T7731 Corded Phone

1 Answer

How do i program the programmable feature buttons on my panasonic kx-t7731

To what, for what? The buttons can be used to dial inside or outside numbers. They're programmed by pressing PROGRAM, the button, and dialing a sequence. If the call is outside, that sequence includes an "access code" usually "9" then STORE.


Jul 06, 2011 | Panasonic KX-T7731 Corded Phone

1 Answer

I have Panasonic kx-T7453 and one of the Outside lines was already connected to a station and while programming a One-Touch dialing ended causing the outside line to be disconnected to this station. How do...

In a TD system, the lines have 2 digit number 01-12 normally, up to 55 actually. So, if line 1 is missing, press PROGRAM dial 99 press the unprogrammed button and dial 0 01 STORE

Press PROGRAM or pick up the handset and drop it back down to exit programming.


Apr 21, 2011 | Panasonic KX-T7453 Corded Phone

1 Answer

I have a panasonic kx-t7731...having trouble setting the speed dial...any help would be appreciated. the users guide information doesn't seem to work. thank you!

A 7731 phone will function on any one of 18 or so different Panasonic system cabinets. Now, which "user guide" are you looking at? SYSTEM speed dial is set from the first extension or the maintanance console of the phone system. PERSONAL FEATURE (speed dials on the right side of the phone) are pretty much universally programmed by PROGRAM button, 9+ number STORE.

What do your instructions say?


Sep 15, 2010 | Panasonic KX-T7731 Corded Phone

1 Answer

How do I program a speed dial out side number on the buttons to the right?

What happens when you dial "9" on the intercom? If that gets you an outside line, then press PROGRAM, one of the buttons, and dial 9 plus your number and STORE.

Hmmm...Speed dial :-)

If you get a vacant line at "9", then you need to reprogram your 400 line access on your phone sytem to disable the vacant lines.


Aug 31, 2010 | Panasonic KX-T7731 Corded Phone

1 Answer

I have a Panasonic KX-T7731 phone. I would like an outside line to connect when the headset is picked up rather than the intercom.

A 7731 phone is compatible with about 18 different Panasonic phone sytem cabinets. Panasonic calls this line preference-outgoing and, in a TA series, which you're most likely to have, you press PROGRAM and dial 12 STORE for idle line, or 13 and a number from 1-8 for a specific line and STORE. 11 STORE puts it back to no preference.


Aug 20, 2010 | Panasonic KX-T7731 Corded Phone

1 Answer

Was entering a # for speed dial and accidentally removed my co line 1. how do I restore?

Press PROGRAM the button for CO1 and dial 01 STORE Press PROGRAM to regular mode.


Nov 02, 2009 | Panasonic KX-T7731 Corded Phone

2 Answers

Our company has a Panasonic kx-t7731 main line has no dail tone.

On that phone, press PROGRAM the button and dial 01 STORE.

Press program again to exit programming.

It's not likely you'll be needing the Group Log In/Out button.


Mar 12, 2009 | Panasonic KX-TA824PK Phone

1 Answer

Clear speed dial/one touch settings

There is no way to clear the settings you would have to re-program the correct setting. Did you program one touch speed dial on the line buttons? I do not see how programming a speed dial could effect accessing the CO lines unless you re-programmed the CO line buttons by mistake. If so, you would need to re-program those soft keys to line buttons. The manual you have may not cover this? The phone you have can work on a few different Panasonic phone systems. If you need a more detailed manual you will first need to know which Panasonic phone system you have. The phone part number WILL NOT help you determine which phone system you have. There is a main control unit somewhere (basement, utility closet, etc..)

Aug 13, 2007 | Panasonic KX-T7431 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7731 Corded Phone Logo

1,076 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 2 Expert

85 Answers

john milligan

Level 3 Expert

514 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides