Question about Panasonic Phones

1 Answer

The Message/Ringer Lamp does not light up when someone has left a message on model #KX-T7667.

Posted by on

  • phouston Oct 14, 2008

    The MW light never goes out even after clearing the messages on the Panasonic KX-T7730 corded phone. Also the phone now beeps three times before a dial tone is heard. Any ideas?

  • Anonymous Mar 21, 2014

    Panasonic KX-T7667

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 2,460 Answers

Go to another phone and dial *701 plus the extension of the 7667. Does the MW light work? If it does and all the others work from VM, then you probably missed an assocation of the mailbox with the extension. It's fixed from the console if it's a TVA system or from the mailbox manager's box, 999.


Carl

Posted on Oct 08, 2008

  • Carl Navarro
    Carl Navarro Oct 14, 2008

    How did we go from a 7667 to a 7731? The beeps are there because something is set, either CF, MW, or pick a feature.



    Press the MESSAGE button and LOOK AT THE DISPLAY. It will tell you what is causing the light to be lit. Or better yet, go to the phone, dial *700 and its extension #. Problem solved :-)



    You can clear most extension data by dialing *790. That means you better know where the call forwarding is set, because it will clear it.



    Carl

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot get the message light to light when a message is left on a Panasonic KX T7667. Also cannot get phone to display date and time instead of Name and extension number on same model.


The second question is easy. Press the TRANSFER button on the idle phone until date and time show up.

As far as MW, have someone ring your phone and dial "4". If the light goes on, you have a notification problem in the voice mail system. Look at the assignments in the VM system to make sure the extension number is paired to the mailbox.

If it doesn't lignt on the "4", the phone is probably defective.

Carl

Mar 11, 2011 | Panasonic Phones

1 Answer

The red light message/ringer lamp at top will not go out


Of course it will, you just have to know how. Press the MESSAGE button and look at the display. It will tell you where the message came from and one of the soft keys will be CLEAR.

In Panasonic's funny way, they let you call an extension and press the MESSAGE button or DIAL the digit "4" and it sets the message waiting lamp. Kinda stupid (the 4 part) but "it is what it is" :-)

Carl

Jul 13, 2010 | Panasonic KX-T7633 Corded Phone

1 Answer

Can't store a one-touch number


Finally worked it out! Add a zero before putting in your mobile number. e.g. 00416 xxx xxx

Jan 02, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

Panasonic KXT7630 MESSAGE RINGER LAMP


It's not permanent, you just have to know how to turn it off :-)

When the phone is idle, the light is lit red and a 7636 will
say Message Waiting. At each phone, do not pick up the handset, but press MESSAGE. Your display will have who left the message on the top line and .EXIT CLEAR under soft keys 2 and 3.

Guess what :-) Press CLEAR and the message is erased. When the queue is empty, the light will go out.

Carl

Mar 16, 2009 | Panasonic KX-T7630 Corded Phone

1 Answer

Change ringer tone


Message/Ringer Lamp: The Message/
Ringer lamp informs you visually that you
have a message or a call.
When you receive a call, the lamp
flashes depending on the ringing pattern.
When the ringing pattern is set to Single
(Slow flash), Double (Moderate flash), or
Triple (Rapid flash) in your PBX, the lamp
flashes. When the other ringing patterns
are set in your PBX, the lamp may not
flash. (e.g., S-Double, Call Waiting
Tone1).
When someone has left you a message,
the lamp is lit continuously.

Please note that the above indicates that ring patterns are set in the the PBX. These are issues that require a real person to sit at the main system and program the features that users need. I hope you have an I.T. person that knows your phone system. If you don't, you'll have to find a communications company in your area that can program your system. Thanks for using Fixya.

Jan 19, 2009 | Panasonic KX-T7730 Corded Phone

1 Answer

Message ringer lamp remains on even after call has ended


See the button labeled MESSAGE? Push it and read the display. Now for fun, call someone and push MESSAGE when it rings. WoW!.

Your phones do other tricks. *700 plus your ext cancels all Messages.

Carl

Oct 28, 2008 | Panasonic KX-T7633 Corded Phone

1 Answer

Message / Ringer Lamp


There's a message waiting. Press the MESSAGE button and look at the display. It will tell you who left the message.

You can clear all messages by *700 and your extension.

Carl

Aug 27, 2008 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

496 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...