Standard 2 way radio manual

Looked through our saved manuals and did not find one for the SU42. However, here is what we know about this model: It was factory programmed with two channels: Ch1 is 464.500 (Brown Dot) and Ch2 is 464.550 (Yellow Dot), both on 25k channel spacing. (This radio is not narrowband capable.) The radio also has 32 programmable PL Codes. You can see your PL Code by pressing down the PL button for 1 second. The code number will be displayed on the screen. Using a standard PL code charge you should be able to determine your code.
Best regards.

Hi, again Craig,

Now that I have the Make/Model of your radio, I can give you advice.

You wish to program your set with frequencies, so here is the best way to do so.

Join yahoo group SPECIFIC to your radio MAKE/MODEL, the team there will assist you with great advice and valuable info, plus you can download manuals, diagrams and other great stuff for your radio.

I hope you are happy with my advice.

Cheers,
Peter

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Yamaha-RX-397-Receivers-manual/id/320ag614/t/2/

Anything that has a headphone output can be adapted to feed an RCA cable pair for standard stereo to any audio device with a standard RCA input (except PHONO). Get a cable like the one described here: http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10218&cs_id=1021804&p_id=665&seq=1&format=2

Of course, if your XM device has standard RCA outputs, use RCA cables without adapters.

Hello
To set time manually do the following.

1. To change your time setting, press and hold the J Time Set Button so that the clock display begins flashing.

2. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the time. Hold a button for a few

seconds to set the time rapidly. Be sure to set the correct AM/PM time, shown by the PM Indicator.

3. After setting the time, press the 4 Enter Button or wait about ten seconds for the clock to beep twice and the setting

to lock into place.

4. To change the calendar, press and hold the 9 Date/7-5-2 Button until the display shows the flashing year.

5. Press the 1 Reverse and 6 Forward Buttons to set the current year. When you have selected the year, press the

4 Enter Button, then use the 1 Reverse and 6 Forward Buttons to set the month/day.
6. After you have set the date, press the 4 Enter Button or wait for the display to beep twice and lock into place.
AUTO TIME SET ZONES

Z-01 Atlantic Standard Time

Z-02 Eastern Standard Time

Z-03 Central Standard Time

Z-04 Mountain Standard Time

Z-05 Pacific Standard Time

Z-06 Alaskan Standard Time

Z-07 Hawaiian Standard Time

3. Find your time zone, then press the 4 Enter Button or wait about ten seconds for the clock to beep twice and the
setting to lock into place.

I believe that MV11C is a vhf radio and CLS1110is a uhf radio. You cannot make them communicate.

Kindly refer here please




http://emjozar.i.ph/blogs/emjozar/2009/04/06/people%E2%80%99s-manual-the-holy-bible/

0053 is the only JVC code in the master manual

Please rate the help++++Thanks for using FIXYA

Here is the user manual Hope this helps www.tehnoturg.ee/kasutusjuhend/Yaesu_VX146_EN.pdf

The standard charge time is 10 hours.
If you have a rapid charger about 1 hour.

Most of the time if your handheld is in a locked status, there will be a single button that needs to be held for usually about 3 to 5 seconds to unlock it. Some Standard radios have a botton with a Key symbol. If your's doesn't have a botton like this, try holding each botton for 3 to 5 secs (1 at a time).