I CAN NOT FIND THE OVEN SAFETY VALVE, DUAL TYPE, IN MY COUNTRY (YEMEN) HOW I CAN BUY IT TO YEMEN.
I ALREADY TRY YOUR SOLUTION BUT THE REPAIRCLINIC GIVE ME THIS ANSWER:
currently ships within the United States, its territories, and its
military bases. We are unable to ship overseas due to tax laws and
custom regulations. We recommend that you contact the manufacturer for
information on purchasing parts.
PLEASE IF YOU HAVE ANTHER SOLUTION TELL ME.
ME OVEN MODEL IS JGBP28BEA2WH. XL44.
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: MISSING PART OF MY XL44 OVEN
You might try http://www.appliance-parts.com/customers/index.htm which is the CE Sundberg Co. Looks like you are after a
WB19K14 which they currently have 4 on hand at their main office in Chicago, plus several at some of their other branches. There is a tab on the web site for persons interested in obtaining parts for export. Hope this helps.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
HI. This will be the fault of a failed dual oven safety control valve. This is a new type of valve control device, that dose not rely on a coil controlled assembly. This control valve is damaged, thus, causing the issues you are experiencing. This mechanical failure will require you to replace this control valve, asap.
the pilot light is there for 2 purposes. number 1 to light the burner and number 2 to heat up the thermocouple, thermocouple is a wire that the flame from pilot suppose to surround by fire. if the pilot is to low it will not reach the thermocouple. you can take the gas line that supplies gas to the pilot and clean it with a safety pin or a small needle. you can test the thermocouple by heating it up with a blow torch on low heat, get it red hot and then turned on the oven. if the oven works clean the pilot, if the oven do not work, replace the thermocouple if separate from safety valve. if thermocouple is part of it replace the safety valve.
Ammar738, I have a few other ideas! How old is your range? You are in Yemen if I remember right? Yes? Huuum
Try these people and perhaps they will ship to you! Appliance Parts Distributors International 400 Bristol Pike • P.O. Box 40 Croydon, PA. 19021 215-785-6282 Email: sales@APD1.com Website: www.apd1.com
YOU SAID, YOU WANT TO BUY OVEN SAFETY VALVE, DUAL TYPE. BUT THE PROBLEM IT IS NOT
IN MY COUNTRY (YEMEN) FORM WHERE I CAN BUY IT? INF: GE XL44 MODEL
NO.JGBP28BEA2WH PLEASE HELP.
Below is the web site of one of our sponsors. I'm pretty sure you can buy it online from them and have them mail or ship it to you. So tell them you pay the shipping. Give them a try. Let me know that you are successful If not I'll find someone who will ship to you. If you have the part number it may help me search if these people will not ship to you. Parts house www.RepairClinic.com
Huuum Please remember to leave a rating when you are done. Shookran
Only 81/2!! most are only expected to give you 5 good yrs anything else is extras. Your problem may be a defective gas valve (safety valve). Also it may be a defective ignitor - the more likely to go bad (if replacing stuff replace ignitor before safety valve. is there a glowing in the oven? does the flames come on any at all?
I'm assuming the top burners work, correct? Do you
still have your Owner's manual? If so, go to the "Troubleshooting
Tips" section and look under the "Surface Burners Light but Oven Does
Not" tips. Follow the guidance provided. You may have a gas
safety valve that is turned off.
If you do not have an owner's manual, you can go to geappliances.com.
Click in the Search window and go to "Use and Care Manuals. Then,
type in your model number in the adjacent window. You manual is available
there in .pdf format. You can download a copy if you like. Make
sure you have Adobe Acrobat reader in order to view it.
Now, if it's not as simple as a gas safety valve turned off, you may have two
igniters that have gone bad at the same time. It is not common, but I
have seen this happen before. Just because an igniter glows does not
necessarily mean it is good. Click on the link below to learn about oven