Question about Office Equipment & Supplies

2 Answers

Kodak printer How to install a new printhead on my Kodak 5300 printer

Posted by on

  • tammyrushing Oct 13, 2008

    how to install the printhead

  • Anonymous Apr 06, 2009

    my printer cannot detect a full ink cartridge. message keeps telling me to replace ink. i have already installed a new print head. did not help at all

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a new Printhead to replace but do not know how to remove the old one. Don't want to break it! thanks vel

Posted on Nov 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Hi Tammy,

Installing the print head is really easy. Actually, it just snaps out and the new one snaps in. The key is where you press on the print head to do this. If you go to the following URL you will see how to accomplish this. Go to:

http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/5300AiOPrinterUG_EN-US.pdf

This shows you how to change the print head in a 5300 model. It is similar to the others as well.

If this does not work for you. contact the 800 421 6699 number and ask them to walk you through installing the print head. It will only take a couple of minutes.

Best regards,

Ron Baird
The friendly Kodak guy

Posted on Oct 13, 2008

3 Suggested Answers

  • 3 Answers

SOURCE: How do you remove the printhead of a Kodak EasyShare 5300 printer?

Clarification: Remove tanks(cartridges)first. You see the bullseye target with a finger pointing to it.
Above the bullseye sticker, there's a rectangular button. Press it in until printhead dislodges.

Posted on Sep 18, 2008

  • 40 Answers

SOURCE: replacing printhead in Kodak 5300 All in One Printer

on this website:
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

You can find illustrated instructions on how to remove the old printhead, as well as on how to put the new printhead back in place.

You can easily go to that website by going to:
www.kodak.com/go/printheadsupport 

and selecting the second option "installing new printhead".

Posted on Nov 06, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printhead needs replacing in my kodak 5300 printer how can i get one


Hi..

Try here
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

You can find illustrated instructions on how to remove the old printhead, as well as on how to put the new printhead back in place.

You can easily go to that website by going to:
www.kodak.com/go/printheadsupport

and selecting the second option "installing new printhead".

Good Luck:-)

Jul 07, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Just installed new printhead and new black and colored ink cartridges. I do not have a calibration calibration sheet any longer. This is for Kodak easyshare 5300 printer.RAU


When you install new printhead in the printer, you will get a message" New printhead detected ,load papers in paper tray and press start. If u do not get this message,that means you have not installed printhead properly. Visit www.kodak.com/go/printheadsupport and click on 3 rd link installing or replacing a printhead to see how to install printhead correctly

Dec 03, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

How to replace the printhead in my kodak printer


Please visit www.kodak.com/go/printheadsupport and click on 3 rd link installing or replacing a printhead.It will show u through diagrams how to take the old printhead out and install the new one. If you do not have new printhead ,kindly call Kodak at 1800 421 6699 and they will send you new printhead after diagnosing your problem. Enjoy.

Dec 01, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Replacement of printhead for easyshare 5300


kodak offers free replacement of printheads,if u have new printhead, log on to www.kodak.com/go/printheadsupport and u can see how to install new printhead. call kodak 1800 421 6699 for further issues

Jul 18, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Installation of printhead



Installation instructions for printhead for Kodak 5300 All-In-One printer

Do you CHARGE for information which should have been provided FREE with the printhead? Included with the printhead was an internet number for prodiving instructions, but they were not provided at this number.

Most fortunately, I located some old instructions which I already had!

Winnie Bauman

wobauman@gmail.com

Jan 20, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

Installing a printhead


I need to install a new printhead on a kodak 5100

Oct 29, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Kodak 5300 ink


First try to install a new cartridge as much as it is a waste of money. Sometimes it helps. If the error on the printer clears, download the newest firmware from www.kodak.com/go/5300downloads.

If that doesn't work, you will need to call Kodak AiO Tech Support at 1800 421 6699 to get a new printhead.

Jul 20, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

4 Answers

Kodak EASYSHARE 5300....Problem:


I cannot get the printer to work on the USB cable. I have tried about everything. Seems that the drivers are there but there is something else wrong. Now what?

Nov 26, 2007 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98914 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...