I have a 13" Durabrand TV, Model DWT 1304, Serial No. V39464860. I am not sure if a DVT converter box, which will be needed by Feb ., will work with this set. Thank you for any help you can give me.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Connect the composite video RCA (yellow) cable output of the DVD player to the TV's video input RCA (yellow jack). Connect the red and white RCA cable from the DVD players audio output to the TV's audio input (red and white jacks). Select the source input from the TV's control panel - if it has an input selector switch, set it to select the video source from the front panel input jacks if you connected the three cables - yellow, red and white on the front of the set. Or, change the channel to receive the video auxiliary input source instead of the broadcast station.
Durabrand codes include: 0133, 0189, 0135, 0153, 0217, 0157 and 1135. Good luck! There are remote controls that "auto-search" codes. I just bought one from Walmart for $4.94! It took me 2 to 3 minutes to figure things out. Aloha!
try 032 or 132 or 11034 or 694. These have all worked on various remotes including Dish Network remotes for the Durabrand DWT 1304 color 13" TV. Look at the Funai Corp codes and the Orion codes. Sometimes they work, Funai Corp makes Durabrand.
The converter must have an "analog pass-through" feature to view existing stations until the changeover.
Not all of the 'approved' boxes had the feature and you didn't include the model number so we could check for you.
If you were dependent on an outdoor antenna, you will still need it for the (any) converter box.
Does your TV have more than one A-V input ?
If so perhaps you're plugged into the wrong input.
Make sure you're coming out an output on your VCR/DVD player and going into an input A-V plug on your TV.
I've messed up like this a few times!