Question about Litronic SSP 215 Reader (050-0215) SMART Card

Open Question

Litronic 215 Not Reading new CAC Card

I recently received a new CAC card with new digital certificates. It now can no longer be read by my Litronic 215 and NetSign software.
The card reader recognizes the card but then gives the following message:

The card is being shared by another process. However, the card is not the one being requested, and cannot be used for the current operation.

any help would be appreciated.
Thanks

Posted by on

  • Anonymous May 14, 2009

    I received a new CAC card today and received the following message:
    The card is available for use. However, the card is not the one being requested, and cannot be used for the current operation.


×

1 Suggested Answer

SOURCE: Just issued the Litronic 215

Have you installed the driver?

http://www.litronic.com/downloads.html

Posted on Feb 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix this page cannot be displayed


First off you need to make sure that you have the right security encryption selected in the internet options. Then you need to make sure that you have the right CAC card certificates.

Jan 01, 2015 | Microsoft Internet Explorer 8

1 Answer

Brand New Canon Rebel T3i not reading SD cards.


It looks like the camera is faulty.
Take it back to the shop for a warranty repair or replacement.

Apr 20, 2013 | Canon EOS 600D Rebel T3i Digital Camera

1 Answer

My A410 keeps reading memory card error. I cannot locate the place to reformat it. I followed the directions and it does not work.


If it's not working, you didn't by chance purchase a brand new 4GB or larger SDHC card? Note that such a card will not work with your camera, as SDHC format came out after it was designed. You can only use 2GB or less standard SD cards. Fortunately, these are very inexpensive these days, and may be purchased on Amazon if your local store no longer carries them.

Aug 31, 2011 | Canon PowerShot A410 Digital Camera

1 Answer

Hello there, I have a Nikon Coolpix L4, and I'm trying to use a 4GB memory card in it that was most recently used in a Canon digital camera. I'm getting the error that "this card cannot be...


Sorry to tell you, but your older camera will not work with 4GB or higher SDHC cards. Your camera was designed before SDHC format came out. You'll need to use 2GB or less standard SD cards. These are relatively inexpensive these days, and are easily found on Amazon, just in case your local store no longer carries them. For others reading, there are several other possible causes for memory card problems, with troubleshooting steps that may be viewed here.

Jul 09, 2011 | Nikon COOLPIX L4 Digital Camera

1 Answer

How can i fixed my sim from PUK blocking?


You need to contact the Customer care of your service provider. They may require you fo fill some personal Identification detail and they will enable the SIM again.

Jun 14, 2010 | Litronic SSP 215 Reader (050-0215) SMART...

1 Answer

Put sd card in vivitar 5399 but not reading it


Receiving no response in over a month, I assume this is no longer a problem.

May 28, 2010 | Vivitar Vivacam 5399 Digital Camera

1 Answer

HP 9250c Digital Sender


The CC543A is the approved CAC reader from HP. That is what we are using on these devices throughout our organization. The reason some CAC readers do not work is because the STIGS on the device from HP require that the device software for the readers also be used. The readers are about $300 each.

Apr 13, 2009 | HP Digital Sender 9250c scanner Printer

1 Answer

Smart card problem in vista


It is probably not permissions I think it would be the drivers need updating and you may have to talk to your techs to get this done if not I can give you a web site that may have the drivers

Jan 26, 2009 | Litronic SSP 215 Reader (050-0215) SMART...

1 Answer

Invalid File...


There is quite probably some connection error between the memory card and the camera's memory card bay. Take a clean anti-static fabric (like the one we use to clean eye-glasses) and wipe the contacts of the memory card and those of the camera's memory card bay/slot (if you can reach them somehow).

Have you tried another card? If another memory card works, then it's obviously a problem of the specific card.

Dec 14, 2007 | Fuji FinePix S7000 Digital Camera

Not finding what you are looking for?
Litronic SSP 215 Reader (050-0215) SMART Card Logo

Related Topics:

960 people viewed this question

Ask a Question

Usually answered in minutes!

Top Litronic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71754 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

68099 Answers

Are you a Litronic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...