Question about Projection Televisions

1 Answer

Get sounnd white line acrooss center of screen

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 185 Answers

Verticle collapse!!! don't run this unit like this, in fact it shouldn't want to run at all as this will damage the crt's check jungle ic for output trace right up to the output chip.

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen turn green tv is 57 rear projection


Good Day,
It appears that you may have a green drive issue. Try adjusting the Sreen Control it is located in the front of TV.
1) Remove Speaker Grill (it just pulls off) start at one end, 2) Remove cover (5-6 screws), 3) Adjust control. The control is located on lower right side towards bottom. A small black device with 2 rolls of controls, adjust the center control on bottom row counter clock wise, until you get a black and white picture.(adjust with color control to min).
If this does not work you light bulb (CRT) is bad about a $750.00 repair.

Good Luck, Big Irish.

Dec 07, 2009 | Toshiba 57H83 57" Rear Projection HDTV

1 Answer

My big screen panasonic tv has a double fuzzy picture what am I supposse to doto fix it


Adjust the convergence or reset it to factory default. Use only the remote when adjusting convergence. The front controls have no effect.
  1. Press action button to enter MENU.
  2. Navigate to SETUP.
  3. Scroll down to CONVERGE.
  4. Press VOL > to select.
  5. Press CH buttons to navigate up or down.
  6. Choose CONVERGENCE ADJ or RESET TO DEFAULT.
  7. Press VOL > to select.
  8. If CONVERGENCE ADJ is selected the align Green to Center screen will be displayed.
  9. Use the navigation buttons on the remote control to align the horizontal and vertical green lines on screen, with the cabinet reference marks on top center and left
    center of cabinet.
  10. Press ACTION button to display red center correction screen.
  11. Use the navigation buttons on the remote control to align the red cross with the white cross pattern at the center of the screen. To prevent picture tube damage do not leave test pattern on for an extended period of time.
  12. Press “0” on the remote control keypad to display the BLUE center correction screen, repeat procedure for adjusting blue. If needed press “0” again to return to RED correction screen. An adjusted cross pattern appears white with a minimum of color protrusion.
NINE POINT CONVERGENCE CORRECTION
Remote Control must be in TV mode.
  1. Press ACTION button to display red correction screen.
  2. Press the 1 through 9 keypad buttons on the remote control to select the desired convergence position.
  3. Use the navigation buttons to align the RED cross with the white cross pattern.
  4. Press “0” on the remote control keypad to display the BLUE correction screen, then repeat procedure.
  5. To exit press ACTION button repeatedly, then press CH up.


Nov 07, 2009 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Colors seperate and picture bent


THIS is a convergens problum .pls. prees menu key and see convergence menu select and see cross line on center the screen select one by one colour line to meching and cross line is white see the pictur is ok.

Oct 03, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Screen shows staticy image on all components


Bad capacitors on the FMT pwb is what is most likely causeing it are the lines going sideways acrooss the screen, yet the menu appears normal.? If so its bad capacitors. You can get the V26 FMT repair kit at the following link which has the replacement capacitors and instructions on how to do the repair. You may also have an issue with the terminal 1 and terminal 2 pwb in that model as virtually every board within the chassis is plauged with Capacitors that fail. Heres the link.
http://servicemanuals.vstore.ca/

Jan 24, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

I have horizontal white lines on my television screen.


Good Day;

White lines could indicate that the TV is about to fail, if something in the TV is arcing. YES, the TV can be repaired but call an Authorized Service Center and have come out and give a written estimate.

Good Luck, big IRISH.

Sep 26, 2008 | Projection Televisions

2 Answers

Converence


green is fixed so you have to move red and blue to green.
by using the remote you may find a simple converge function and open this and using arrow keys move the blue or red first to center of screen, repeat for other color you should see the lines moving toward a a white center point.

if the lines do not move with remote try manual ...menu on the set. if still no movement you have a problem on the convergence board and need a tech to fix.

A service manual will explain complex convergence to the detail .
but this might take hours to get it right.

Aug 09, 2008 | Zenith R56W36 56" Rear Projection...

1 Answer

Hitachi 57SWX20B 3D Effect due to green light convergence problem


I'm trying to fix the issue on my 43FDX20B. So far, I'm able to move the lines up and down, but can't get the left/right motion to fix it. The attached link has the dynamic mode instructions, so you can correct this issue yourself.

http://home.comcast.net/~leebailey00/Hitachi_DCAM_Manual.pdf

The only thing I didn't have was the screen overlay jig the manual talks about. I decided to create one myself and use the screen as a beginning template. I went to our local hardware store and picked up some home window weather covering. The roll cost about $15, is a clear strong plastic and the template was very easy to create. I used a straight edge after I put dots on the plastic and measured the lines for being square and equal after I took it off my tv. Good thing is that if you don't like what you make the first time, you have a 25' roll to use to try again (ha).

Mar 01, 2008 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Picture problem


Probably a bad light engine. Not uncommon on these units.

Mar 07, 2007 | Sony Grand WEGA KDF-42WE655 42" Rear...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...