Question about Sanyo Xacti VPC-T700 Digital Camera

1 Answer

Lens error 3008

My camera turns on for abot 3 seconds then turns of and before that it says lens error 3008

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Sanyo Master
  • 96,396 Answers

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Posted on Feb 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When trying to turn the camera on, the lens will not extend fully. it extends partially, and then the camera turns itself off, leaving the lens in the partially extended position. you have to try and turn...


Unfortunately, many cameras that fall prey to lens error problems can only be corrected by professional repair. But, here are some last resort troubleshooting steps that you can try that may correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try.

Jun 23, 2011 | FUJIFILM FinePix JX250 Digital Camera

1 Answer

I turn camera on. Lens comes out. beep 3 times. turns off.


Everytime I try to turn it on, the lens comes out for about a second, the camera beeps 3 times, the lens retracts and the camera shuts off. The battery is completely charged and the camera is only 4 months old. HELPP :(

Jun 17, 2009 | Samsung Digimax S500 Digital Camera

1 Answer

Lens Error: 0x12110000 when previewing pictures in camera.


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Jun 01, 2009 | Sanyo Vpc-s1070w Digital Camera

1 Answer

Camera was dropped. Now it will turn on, but after a few seconds, lens begins to move in and out for about 3-5 seconds, then a messag is displayed: Pleaase turn camera off then on again". Doing this r


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

May 17, 2009 | Panasonic Lumix DMC-LZ3 Digital Camera

1 Answer

Lens Error. Restart Camera. Camera gives this error message and then shuts off. I can't access photos or function buttons. What can I do?


Press the "MENU" button and navigate to the reset command and reset the camera. That may get the camera to function properly.

May 10, 2009 | Canon PowerShot SD1000 Digital Camera

1 Answer

Lens Error: 0x12110000 when previewing pictures in camera.


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Apr 22, 2009 | Sanyo Vpc-s1070w Digital Camera

1 Answer

Problem*cybershot DSC-S40


You have a jammed lens error the lens has to be repaired or replaced. You dont have to drop the camera for this to occur it can happen when ever the camera is in your pocket or purse. it accidently gets turned on and when the lens is coming out it is obstructed and strips the little plactic gears in the lens.

Feb 19, 2008 | Sony Cyber-Shot DSC-S40 Digital Camera

1 Answer

Broken zoom


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension.

Here's some things that you can do to try to correct it. They only seem to work for about 50% of lens errors, but they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Jan 16, 2008 | Canon PowerShot A520 Digital Camera

Not finding what you are looking for?
Sanyo Xacti VPC-T700 Digital Camera Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Digital Cameras Experts

kakima

Level 3 Expert

96372 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Sanyo Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...