Question about Kenmore Sewing Machines

Open Question

Kenmore sewing machine model 15817550

Where can Ifind the knee or foot control

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Kenmore sewing machine manual for model # 148 12080. (older)

i have a older kenmore sewing machine model #148.19370

Posted on Sep 17, 2008

  • 323 Answers

SOURCE: foot pedal assembly for White sewing machine

You only need to replace the cord if it has been damaged. It will cost less if you just take the machine , cord and control to a local technician and have him just replace the foot control. Let him test it first. A generic foot control should cost less than $30.
sewman7

Posted on Dec 29, 2008

  • 96 Answers

SOURCE: Kenmore sewing machine and zipper foot attachment

refer to site feedback@sewconsult.com

Posted on Dec 14, 2009

  • 1 Answer

SOURCE: We have a very old Necchi Model BU Mira, that is

The power wire (from the wall) connects to a block just under the motor where the on/off switch is. On my machine there is a brown block with the words Necchi italy on it. I unscrew two screw and there is a track were the power cord lays and leads bite in to the cord as the screws are retightened..... The blue wires from the transformer are on the "sewing machine side" of the transformer and power from the wall should not be attached there.

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore sewing machine model 385 19110600. What does this mean or what is wrong with my machine


E2 is a foot control problem. Either it isn't connected fully and correctly or it is going bad to where you need to order a new foot control.

Mar 30, 2015 | Kenmore Sewing Machines

1 Answer

Where can I purchase a used Sewing Machine Foot Control Pedal & Cord


Try eBay or a sewing machine repair service.

Search the internet, inputting:
Manufacturer + Model + "parts"

...

Aug 16, 2014 | Kenmore Sewing Machines

1 Answer

Bobbin rewinder won't work


it's possible that there is a part inside the machine that could be broken, it would be a good idea to have the machine checked.

Jun 23, 2013 | Kenmore Sewing Machines

1 Answer

I got a 1950 sewing machine set in a table with a knee control for the pedal. The light comes on, but I am not sure how to make the knee pedal work. There is a lever and I have moved it, but nothing...


Have you tried getting a copy of the owners manual? You can usually download one for $10 at www.sewingmanuals.com or go through Sears. I remember having a machine with a knee control and it seems to me that you only had to pick your stitch length and press the knee control to make it sew. Mine was a straight stitch only Singer. Do some research online with your model number, google it and see what you find. Good luck

Nov 10, 2010 | Kenmore Sewing Machines

1 Answer

Should there be a pedal with this machine (201K) purchased in 1953? What is the metal twisted bar for?


sounds like you have a cabinet model, yes this machine requires either a foot or knee control, the twisted metal is probably part of the knee control mechanism. order foot contrrol or knee control to fit the machine from linssewvac@hotmail.com

Sep 25, 2009 | Singer 132QRFB Mechanical Sewing Machine

1 Answer

Machine slows down,stops, starts again. Foot control problem?


Yes it does sound like a faulty foot control. The power cord is probably fine, you just need the controller. Ebay is a good source for parts.

Feb 02, 2009 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

kakima

Level 3 Expert

98694 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Kenmore Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...