Question about Sony DAV-IS10 System

1 Answer

CD stuck digital reads no disc

Newly purchased,set everything up, including speakers on the wall, receiver works and sound great. Installed a CD and it will not come out. It keeps reading no disc? I know it's there. Any suggestions? Help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem.. just read cd (MUSIC) NOT READING DVD SAYS  ERROR, DISK IS DIRTY

Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My theater doesnt give out sound will i have connected everything?


Assuming you have never had it working before, then it's likely that you have got a setting wrong.
Not knowing the make or model. What I suggest you do is do is find the speaker test settings. There should be an option to send a tone to each speaker. This will determine if you have connected the speakers right. It will tell you which speaker is being tested. If you can't hear the tone, then the speaker is not present or connected right.
Once you have done and if you still can't get sound. Try a simple stereo test source such as working CD player or tape deck. Connect to a socket and select the device function setting CD etc. Set it playing.
Do that for every device function one at a time. Follow the settings in the manual and you should get the thing to work.

Aug 16, 2016 | Home Theater Systems

Tip

How to set up a seven-speaker home theater system


Set up a home theater

How to connect your speakers

In order to deliver surround sound, home theater systems require 5, 6, or even 7 speakers--and that's not even counting the subwoofer. Connecting all those speakers together can be quite a challenge, so here's a quick overview of the basics.

If you don't have an all-in-one, home-theater-in-a-box system, you'll probably need to supply your own speaker cables. There are several different types available--they vary in terms of wire size (or gauges) and termination types. Make sure you pick cable that's a good match for your speakers and receiver. And make sure they're long enough; the rear-channel cables in particular will be stretching all the way around the room.

Once you've selected your system and have all your speakers ready to set up, begin by placing each speaker at or near its intended location. Then, attach the cables to them one by one. After securely fastening one end of the cable to the speaker, connect the other end to the appropriate speaker output on the back of the A/V receiver. Be sure to connect the cable to the correctly labeled output.

For instance, the front-right speaker wire needs to go to the terminal labeled front-right. Also, make sure that each speaker connection is in phase, meaning negative to negative and positive to positive. Otherwise, your system's sound will sound out of whack. Repeat the process for every speaker in your system. Note that the subwoofer uses a coaxial-style RCA cable instead of standard speaker wire.

Once all the wires are connected, you should test the system with several DVDs and CDs, to ensure that everything is in working order.

For our first example, we used an elaborate 7.1-channel system, so it may have 1, 2, or several more speakers than your system. Some systems even employ wireless rear speakers, or virtual surround-surround modes that simulate multichannel experience from 3, 2, or even 1 speaker. And some listeners still prefer good old stereo sound from 2 speakers. No matter what type of speaker setup you prefer, however, the wiring basics remain the same.

How to position surround-sound speakers and a subwoofer
To get the best performance from a surround-sound speaker system, you must install each speaker in the correct location. There are three basic types of surround-sound speaker systems.

  • The 5.1-channel system has five satellite speakers and a subwoofer.

  • 6.1-channel systems have six satellites and a subwoofer.

  • And 7.1-channel systems have seven satellites and a subwoofer.

Start by placing the center speaker either directly above or directly below your TV. The center speaker can be perched atop a direct-view TV or mounted on the wall. Aim the center speaker at ear level.

In most cases, the front-left and front-right speakers can be wall mounted or placed on stands. However, if your speakers have rear-panel bass ports, they should not be wall mounted. Space your front-left and front-right speakers the same distance apart as the distance between your center speaker and your listening position. Position the front-left and front-right speakers no more than two feet above or below the front-center speaker. The tweeters in the front-left and front-right speakers should be roughly at ear level relative to your seating position.

Ideally, the surround-left and surround-right speakers should be mounted on the side walls of your room, slightly behind or parallel to your listening position. If your speakers have rear-panel bass ports, place them on stands instead. If installing the speakers on the side walls isn't practical, you can mount them on the room's rear wall or place them on stands behind your listening position. The surround speakers can be installed up to two feet above the front speakers.

Also, 6.1 surround systems have a back-center speaker. You'll typically mount this on the rear wall of your room, centered behind your seating position. Position the back-center speaker no more than six feet behind the surround-left and surround-right speakers. If your speaker has a rear-panel bass port or if the rear wall is too far behind your seating position, place the back center speaker on a stand instead. The back-center speaker should be installed at the same height as the surround-left and surround-right speakers.

Instead of a single back speaker, 7.1 surround systems use a back-left and a back-right speaker. These, too, are typically mounted on the rear wall of your room. Position the back-left and back-right speakers so that each is approximately aligned with the left and right edges of your listening position. Place the back-left and back-right speakers no more than six feet behind the surround-left and surround-right speakers. If your speakers have rear-panel bass ports,or if the rear wall is too far behind your seating position, place the speakers on stands instead. Install the back-left and back-right speakers at the same height as the surround-left and surround-right speakers.

A subwoofer is the last component of a 5, 6, or 7.1 system. Because bass frequencies are nondirectional, you can place the subwoofer in various locations. You may get the best performance by installing the subwoofer in the front of the room, approximately six inches from the wall. If you want more bass, try placing the sub near a corner in the front of the room.

Connect your DVD player to your A/V receiver--digitally
To hear a movie's soundtrack in surround sound, you must first connect your DVD player to an A/V surround-sound receiver. You'll need to make what is called a multi-channel-compatible connection.

The easiest way to do this is to use a cable that carries a digital signal. There are two digital options: optical and coaxial.

An optical digital connection, also called TosLink, uses pulses of light to deliver a digital signal. According to some experts, one advantage of optical digital connections is that optical cables don't pick up noise, while lower-quality coaxial cables can. Many, but not all, DVD players have an optical output. Most A/V receivers have at least one and usually multiple optical inputs. Plug one end of the optical cable into the DVDs player's optical-out jack. Plug the other end into the receiver's optical input.

Finally, you need to tell your receiver to use the optical connection whenever you switch to the DVD input. This is called assigning the input. Information about this simple process can be found in your A/V receiver's manual.

A second option is a coaxial digital connection. This type of connection is also used for cable TV, but the connectors are different. This type of coaxial cable has an RCA connector. Coaxial cables are less expensive than optical ones. In fact, you can use any old RCA cable to make a coaxial digital connection, and you won't lose any audio quality.

Most, but not all, DVD players, have a coaxial output. Some have coaxial and optical outputs, so you get a choice. Audiophiles argue over which connection is better, but it's very hard to hear the difference. Most A/V receivers have at least one and usually multiple coaxial inputs. Plug one end of the coaxial cable into the DVD player's coaxial-out jack. Plug the other end into the receiver's coaxial input.

Finally, tell your receiver to use the coaxial connection whenever you switch to the DVD input. Again, your A/V receiver's manual will have instructions for assigning an input.

on Aug 13, 2010 | Home Theater Systems

1 Answer

My RCA keeps quitting on me.


U have a part in there that is changing value as it is used or gets hot.
Look for a bad capacitor in the power supply - when that goes bad everything shuts down.

Also check the plug going into the wall for a sound connection with the wall receptacle.

Aug 06, 2015 | RCA Home Theater Systems

1 Answer

My Pioneer XV-DV282AP home theatre has no Audio output. Every time I put the volume up/down, it keeps on saying HDMI/TV Audio. It only works with an HDMI cable using the speaker from the Television.


The system is set up to output sound through HDMI to the TV. You can change the setting so the sound is sent to the speakers. The process for changing the HDMI output setting is in page 41 of the manual. You want to choose the AMPsetting. I have included a link to the manual and copied the text below.

1. Press SHIFT+SETUP.

2. Use ?/? to select HDMI SET then press
ENTER.

3. Use ?/? to choose HDMI MODE then
press ENTER.

4. Use ?/? to choose the setting you want
then press ENTER.
• AMP - Output Audio sound of the DVD/CD
and USB function signal from this system
• TV - Output Audio sound of the DVD/CD
and USB function signal from a TV or flat
screen TV.


http://www.manualslib.com/manual/130342/Pioneer-S-Dv180.html?page=41#manual

Jun 10, 2015 | Pioneer Home Theater Systems

1 Answer

When i put in my dvd it keeps telling me no disc but them the next time it works fine


pls Clean your DVD player's LASER lens .. A clean DVD player Lens ensures that your DVD disc would be read and Write properly. Unfortunately, your DVD player's Lens accumulate as much dust and lint as the other parts of the DVD player. There are many available DVD lens cleaner kits that you can purchase and use to clean your DVD player.
YOUR DVD disc itself should be clean and finger prints free as well....

Here is a suggested DVD Lens Cleaner that should do the job of cleaning your DVD Player's lens.

Maxell DVD-LC DVD Lens Cleaner -
This DVD Lens cleaner features the "Thunderon Brush System" and include tests for audio performance including Dolby 5.1 surround sound. It also features an interactive on-screen instructions in 8 languages including system set-up. (Price: $10.81)

if this remedy does not help pls let me know...
Hope this helps! Take care and please Remember to rate/vote and give me
4 Thumbs Up for me to continue for Helping out the Community :)
Thanks

Oct 09, 2011 | Sony BRAVIA® DAV-HDX576WF Theater System...

1 Answer

Is the Panasonic Home theater SC-HT 900 bought in 2005 a good system, someone is trying to sell it to me used for 200.00


Hi,here it is some tech info and the user ratings from Amazon...it is a fair price for 2.hand...as ebay has the similar prices..it seems to be a good deal...

Take care and please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)

Hope this helps!

----------------
Product Features and Technical Details
  • Dolby Digital, Dolby Pro Logic II, and DTS-decoding home theater receiver with 5 speakers and a powered subwoofer
  • 35 watts per channel x 4 "tallboy" speakers, 140 watts for the center channel, and 150 watts for the subwoofer
  • High-resolution DVD-Audio playback; JPEG, MP3, and WMA CD playback
  • Magnetic shielding for distortion-free placement near a TV or computer monitor
  • Includes digital FM/AM tuner and a universal remote control
Technical Details
  • Brand Name: Panasonic
  • Model: SC-HT900
  • Output Wattage: 390
  • Component Type: Home theater system
  • Audio Output Mode: Surround Sound
  • Surround Sound Effects: Super Surround Sound
  • DVD Type: DVD changer
  • Built In Decoder: Dolby Pro Logic II, Dolby Digital, DTS decoder
  • Remote Control Description: Universal remote control
  • Optical Digital Input: Yes
  • Audio Input: None
  • Tuner Technology: Digital
  • Radio Bands Supported: AM/FM
----------
Panasonic SC-HT900 Home Theater System with 5-Disc DVD Changer
Very attractive system with many features. Progressive scan DVD player looks great on my projector, thanks to the high end video circuitry in the 5 Disc DVD changer. Sound is very clear and accurately reproduced though the six speakers. Movie dialogue comes through very naturally. Does a fine job at decoding Dolby Surround. Movie "bass" effects are clear and pronounced through the active subwoofer. I've tested this system in store next to an expensive Bose and the quality is more or less comparable. It is a known fact Panasonic DVD players are among the best in the business. Many more expensive DVD players(costing considerably more than this system) made by other brands use Panasonic internals for their players.
All DVD players must contain an MPEG decoder. In addition, progressive scan DVDs must contain a special device called a deinterlacer. Interlaced video frames are sent to a television in two pieces, by first drawing all of the odd lines, then the even ones. The deinterlacer essentially doubles each frame of video(producing a very defined picture) by filling in missing information. That is the true meaning of "progressive scan." This is the basis for HDTV, and be aware that your (Projector,TV,LCD) must be able to display HDTV or progressive to take advantage of this great feature. As with any other product, deinterlacers vary in quality and must be able to handle various film encodings. Panasonic uses top notch internal hardware to perform the deinterlacing(DCDi) and decoding. The results are spectacular!
Don't expect the bass to blow your ears out - no system at or near this pricepoint will. The subwoofer is powered but yet conservative (but more than other systems in its class). Don't buy this unit to play at maximum volume. System can be cranked up to loud but not extreme voulme. Sound will be more than enough for rooms This unit also makes a great system for listening to FM Radio, CD/R etc. Unit supports many types of Discs. Music seems rich and pleasing, in some cases exceeding much more expensive units.
The speaker stands will save you the cost of buying wall mounts. This system has a plethora of features that are stated in the manual. For example, there are multiple surround modes, seating placement adjustments and digital input capability. Unfortunately the owners manual is written like an engineering course lab manual - so it may take the non- technical some time to learn all of the arcane features. Also, you should purchase at least a 16 gauge spool of speaker wire - do not use the doorbell wire that is supplied with the unit.
Overall I will give this unit 5 stars, because it is priced very well with respect to its competition (Sony Dream system 990) and it exceeds that and other products in its class in terms of quality and features. On the other hand, if you desire a very loud, extreme bass systems - don't consider a home theatre in a box. Purchase a component receiver/amp with large poweful speakers. And of course, a Panasonic progressive DVD player for the best video!
************

Jun 21, 2011 | Panasonic Home Theater Systems

1 Answer

I have a LG 42" LCD paired with a LG LHT854 home theater and a directv HD receiver. I the satellite receiver and 854 hooked to the TV via HDMI and the satellitle receiver is connected to the 854 via...


I have an almost exact set-up and you will only get sound out of your rear speakers when the TV channel is broadcasting in 5.1 Ch Stereo. Otherwise the sound is limited to your front, center, and woofer speakers.

Aug 02, 2009 | LG LHT854 Theater System

Not finding what you are looking for?
Sony DAV-IS10 System Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Home Theater Systems Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dennis McCollum

Level 2 Expert

137 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

Are you a Sony Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...