Question about Televison & Video

1 Answer

JVC 42X776 Plasma Screen partially broken

My wife brought home this tv from work because they were just going to throw it out... "Good Wife" I said. Anyway....

I turn it on and the bottom left quadrant remains black. Some lines start to appear and creep across the screen. There is also a black patch in the middle that has absolutely no pattern to it. The best way to describe it is "flower shaped" I can change inputs and access menus. It locked on my one time and I had to do a hard reset (aka pull the plug). So, I'm thinking it overheated at one point and fried something inside?

I'm going to take it apart and look for some smoked ICs. ANy other suggestions?


Posted by on

  • JPSBMW325I Oct 08, 2008

    What can I do about a defective panel?

  • JPSBMW325I Oct 09, 2008

    So further diagnosing the issue: The bottom half of the screen has massive red snow and some black. It is more concentrated in one area than the rest of the panel. I
    played with all the tunable pots and I could make the screen change,
    but nothing got better, although I did tune some of the black away, so now its all snow. After doing some research I found out that
    there are 2 boards, an upper and a lower that drive the corresponding
    halves of the screen. There is also a main board that builds the power
    I'm guessing and the upper and lower boards do the DSP. So, my
    question: The DSPs on the lower are getting extremely hot (all 4 of
    them) and the TV actually shuts off after a while (I'm guessing
    overheating). Does anyone know of a common failure on these boards?
    There are not any obvious blown caps or ICs....




1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Sounds like you have a damaged panel or at least defective one

Posted on Oct 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Plasma has no picture but sound works???

If the set was struck even a moderate blow anywhere near the screen you may have a bad plasma display panel---the diffused picture sounds like that.

Sep 01, 2012 | Pioneer PureVision PDP-5040HD 50 in....

1 Answer

I bought a 50 inch insignia plasma tv on jan 29 2011. i was get out of bed did not know the power went out it was dark i triped and fell foward hit my head on the tv and and cracked the screen on it ive...

Talk to them,return the tv u probally get like 20% off for a new replacement tv.U probally have to pay 80% of the new tv.Because u cause the tv LCD screen panel to be broken.The tv LCD screen panel is 90% important to the tv and it is limited in production by the tvs corporations.Tv with broken LCD screen panel only worth as a salvage tv for it electronic boards for parts,that it.

Mar 15, 2011 | Insignia Televison & Video

1 Answer

OK so i found this Samsung LN-3251D 32" HDTV LCD TV /MONITOR Last night they were throwing it out i brought it home and Plugged it in and hooked it up to see what is wrong with it i found that the...

The LCD screen panel is broken or damage.Not worth fixing,sorry.The LCD screen panel are 90% of the tv.The screen panel,will cost the same as a new tv,to replaced.The tv now,only can be worth as salvage electronic boards for parts.

Oct 06, 2010 | Samsung LN-S3251D 32 in. LCD HDTV

1 Answer

Broken JCV Plasma Screen

Its prob not worth swapping lcd screen as new ones are excessive cost compared to buying a new tv. Power supplies often fail on lcd tv s so u may find a faulty one locslly being chucked with good screen but no power,to make one good one.connections vary make to make but most units are made by just a few manufacturer s so so can be interchanged,sorry its a wasteful world

Jan 12, 2018 | JVC GM-V42UG 42 in. Plasma EDTV

1 Answer

JVC plasma tv LT-40DS7BJ the plasma screen is broken pls where i can find it , I haved call in diferents places and NOT good replay

that tv is not plasma its lcd , and for what it costs to replace an lcd panel , its just as cheap to buy a new tv

Feb 11, 2010 | Televison & Video

2 Answers

Plasma TV smell?

a smell from a plasma is usually a electrolytic capacitor leaking.  Luckily, replacing capacitors is very easy.  you can do it yourself if you have any skills at all, and if you can identify it.
just google what i am saying, you should be able to find the info you need to replace them.

Jan 31, 2009 | Panasonic Viera TH-42PX80U Plasma TV

1 Answer

Unexpected zoomed-in picture on my JVC PD 42X776

Depending on the cable provider there is a zoom function on the cable box remote , # for time warner.

Feb 27, 2008 | Panasonic TH-50PHD7UY 50 in. HD-Ready...

3 Answers

Broken Plasma TV

I'm looking for a broken screen HP-S5053 to buy from someone. I have a new screen that needs a home. I need one that is complete and working other than the screen. Or I would sell my screen to you. Thanks, Wade

Sep 16, 2007 | Samsung HP-S5053 Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74822 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5258 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides