Question about LG TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher

1 Answer

"Door Locked" Indicator Switch Faulty

LG WM2075CW (TROMM Ultra Capacity)Front Loading Washer When the front door of the washer is fully, properly and securely closed - and the start button is depressed - an alarm sounds, the "Door Locked" indicator flashes and the washer won't start. The door has to be opened and closed several times - at just the right angle and with just the right amount of pressure (by pressing hard against it) - to get the indicator to recognize that the front door is closed and the washer to start. This problem is intermittent and no one ?technique? works every time. My LG is a WM2075CW. The message "PF" keeps flashing. I guess the door is the problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • LG Master
  • 2,156 Answers

Replace door lock. Pretty easy

Posted on Apr 06, 2017

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 641 Answers

SOURCE: "Door Locked" Indicator Switch Faulty

You should access the lid switch (the switch is inside the machine main housing near the door frame) and to see whether it become loose or was broken. Good luck!

Posted on Aug 21, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front loading washer door should it be left open or closed when no use.


I recommend leaving the door slightly ajar when not in use. That way your rubber boot/door gasket doesn't get smelly or stinky.

-Colleen @ MendingShed

May 05, 2015 | LG Tromm Front Load Washer And Dryer Set

1 Answer

Washer won"t turn on outlet is working


If the washer won't start, the user control and display board or the main control board may be defective. The main control board failure is not common. Check other parts and causes first.
If there is power to the display and the machine wont start, check that the door is latching properly as there is a switch in the door latch that tells the control board when the door is properly closed. The switch might be faulty.

Feb 16, 2015 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

Washer WM2075CW -The dispenser is stuck, only pulls out aprox 1/2


Yes you are correct, fabric softener dispenser is culprit. Search on this site for solutions. Issues and solutions have been posted often.

May 04, 2017 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

I have LG ,Tromm washer machine front load have problem. Door is not closing completely .


The "dE" error code indicates that the LG Tromm washer's door has not been properly closed. Closing the door firmly usually clears this error. If the error does not go away once the doors closed, a service technician should be consulted.

Jun 03, 2011 | LG WM-2277HW Front Load Washer

2 Answers

LG WASHER LEAKING WATER FROM THE DOOR


The manufacturer recommends using washers and shimming the door latch between frame and switch. This will make the door close tighter.

Mar 29, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

Front bottom leak from my LG TROMM HE Washer


  • Hi
  • Try these:
  1. Inspect the water supply connections
  2. Inspect the drain hose
  3. Inspect the water pump
  4. Inspect outer tub for cracks or corrosion
  5. Inspect the tub seal
  6. Inspect the tub bearing
please rate my suggestion...

May 22, 2009 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

Front load washer leak


This could be the rubber seal or the door lock. If the door lock is not pulling it tightly closed then it needs to be replaced. Check the seal really closely and make sure there are not cracks and it does not look deformed

Feb 16, 2009 | LG WM2277H Stainless Steel Front Load...

2 Answers

Front loader LG Washer


make sure your outlet hose is not constricted or blocked in any way.

May 20, 2008 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

TROMM ultra capacity washer water levels


these machines are mean on water and you can open the door after wash starts
use good quality soap powder that suits front loaders and always wash at 40 deg or above
the black stuff is body fat that is still in machine called scud to me
also if you use conditioner in rinse cycle stop using that
it can cause same problem

Jan 28, 2008 | LG WM-1832C Front Load Washer

1 Answer

"Door Locked" Indicator Switch Faulty


You should access the lid switch (the switch is inside the machine main housing near the door frame) and to see whether it become loose or was broken. Good luck!

Aug 18, 2007 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...