Question about Nokia 2610 Cellular Phone

1 Answer

3310 jumper techniques

My phone is laready ok but there one problem that i can solve. the display from lcd are broken & a lot of dots.is there a problem w/ the connector or on board.now i can change my lcd there no change about the display?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nokia Master
  • 1,800 Answers

Try to check three or 4 lcds till its give a good resolution

if this is not work the affiching circuit/chip is faulty

its need a hot air to get to it original place due a deform on the motherboard

and also check the connctor use the smae method

plz rate this post as good as u can

Posted on Oct 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung champ duos c3262 no display forums fix


many reasons are major cause for no display,blank display,scrambled display. In samsing champ duos c3262 no display problem terouble shooting.first connect with charger no charging logo on screen.open your cell phone and clean pcb and lcd connector with corbon tetra cleaner(ctc)dry normal.problem not solve then try seen lcd with lamp if display is shown but no light make light jumper or change lcd.lcd ok and new 100%working condition please be care fully check lcd connector.no display no luck final heat or replace display controller ic.
here is the light ic jumper if your lcd is black and now lights.
click on link for jumper ways by image. Samsung champ duos c3262 no display jumper Phonetolls

Jan 04, 2015 | Samsung Cell Phones

1 Answer

Can't read any information in the window


hi,

Is your phone still works even w/o display?

there are several reasons why display disapprears.

1) probably your phone experience accidental impact and that causes lcd flex connector to get loose and causes no display.
2) defective or damaged flex connector.
3) defective lcd or open line connection to lcd.

You can fix it yourself if the problem is on no. 1 (loose connector). open your phone slowly (since delicate parts inside and remember its part placements) using screws driver and locate the lcd flex connector (usually behind the LCD) that connects the lcd to the main board. remove it slowly not to damage it and look for abnormalities, if none, then put it back securely and assemble your unit. then give it a try...

for problem 2 and 3. You can order flex or lcd at ebay and change it yourself. be sure it is the right type for your unit. for dismantling your unit be sure to remember the parts, how they are installed and how to put it back. Be patient and this requires a lot of time to disassemble.

Good Luck!

Don't forget to rate me OK! Thanks...
Hope i helped you...

bst rgrds,

John

Jan 25, 2011 | Uniden Cordless Phone

1 Answer

Blank lcd


hi,

there are several reasons why display disapprears.

1) probably your phone experience accidental impact and that causes lcd flex connector to get loose and causes no display.
2) defective or damaged flex connector.
3) defective lcd or open line connection to lcd.

I recommend not to open your phone since it is very tricky to open it and there's a great chance of damaging the LCD and also if your unit is still in warranty and if the warranty sticker is broken, your warranty is void. instead have it repaired to your phone dealer or provider and that saves you from trouble.

but if you really to gamble and give it a try (Don't do this if your not sure what your doing!), you can fix it yourself if the problem is on no. 1 (loose connector). open your phone slowly (since delicate parts inside and remember its part placements) using t6 or t7 screws and locate the lcd flex connector (usually behind the LCD) that connects the lcd to the main board. remove it slowly not to damage it and look for abnormalities, if none, then put it back securely and assemble your unit. then give it a try...

for problem 2 and 3. You can order flex or lcd at ebay and change it yourself. be sure it is the right type for your unit. for dismantling your unit be sure to remember the parts, how they are installed and how to put it back. Be patient and this requires a lot of time to disassemble.

Good Luck!

Don't forget to rate me OK! Thanks...
Hope i helped you...

bst rgrds,

John

Jan 08, 2011 | Nokia 1209 Cell Phone

1 Answer

The main display disappears after opening the phone. It appears every time the phone is opend and then disappears. I can't access numbers and cannot see who is calling. The battery has been charged and the...


hi,

there are several reasons why display disapprears.

1) probably your phone experience accidental impact and that causes lcd flex connector to get loose and causes no display.
2) defective or damaged flex connector.
3) defective lcd or open line connection to lcd.

I recommend not to open your phone since it is very tricky to open it and there's a great chance of damaging the LCD and also if your unit is still in warranty and if the warranty sticker is broken, your warranty is void. instead have it repaired to your phone dealer or provider and that saves you from trouble.

but if you really to gamble and give it a try (Don't do this if your not sure what your doing!), you can fix it yourself if the problem is on no. 1 (loose connector). open your phone slowly (since delicate parts inside and remember its part placements) using t6 or t7 screws and locate the lcd flex connector (usually behind the LCD) that connects the lcd to the main board. remove it slowly not to damage it and look for abnormalities, if none, then put it back securely and assemble your unit. then give it a try...

for problem 2 and 3. You can order flex or lcd at ebay and change it yourself. be sure it is the right type for your unit. for dismantling your unit be sure to remember the parts, how they are installed and how to put it back. Be patient and this requires a lot of time to disassemble.

Good Luck!

Don't forget to rate me OK! Thanks...
Hope i helped you...

bst rgrds,

John

Jan 06, 2011 | Nokia Cell Phones

1 Answer

Nokia 2626 getting blue display


hi,

there are several reasons why your getting a blue display.

1) probably your phone experience accidental impact and that causes lcd flex connector to get loose and causes no display.
2) open connection to lcd.
3) busted lcd.

If your phone has still a warranty don't try to open your phone and there's a great chance of damaging the LCD and also your unit is still in warranty and if the warranty sticker is broken, your warranty is void. instead have it repaired to your phone dealer or provider and that saves you from trouble.

but if you really to gamble and give it a try (Don't do this if your not sure what your doing!), you can fix it yourself if the problem is on no. 1 (loose lcd connector). open your phone slowly (since delicate parts inside and remember its part placements) using t6 or t7 screws and locate the lcd flex connector (usually behind the LCD) that connects the lcd to the main board. remove it slowly not to damage it and look for abnormalities, if none, then put it back securely and assemble your unit. then give it a try...

Good Luck!

Don't forget to rate me OK! Thanks...
Hope i helped you...

best regards,

John

Jan 05, 2011 | Nokia 2626 Mobile Phone

3 Answers

No sound


If you have the tools needed to open your cellphone: Open your cellphone then clean the buzzer contact, check the ringer buzzer if it is ok , if still... then do this jumpering :
eb09582.jpg

Apr 28, 2010 | Nokia 3310 Cellular Phone

2 Answers

My phone was in my pocket and half or the screen show black, how do i fix it . it is not broken but i can still see a little display


-if not broken realign the contact between the lcd connector going to board connector then test.
if not working.
-replace lcd.

Dec 27, 2009 | Nokia 6300 Cellular Phone

1 Answer

My nokia display screen looks black on one side and colored dots


your display has broken.lcd are made of glass,its easy damage when phone is droped.must change display in service

Dec 07, 2009 | Nokia 6300 Cell Phone

1 Answer

The display has gradually disappeard on all three handsets


that is an celphone? if celphone i think the problem is the LCD screen have the problem you can go to the service area and ansk to replace other LCD of your celphone that is the best way to do. you can not solve that even you change your battery or anything...

Jul 29, 2009 | GE 25952EE1 Cordless Phone

Not finding what you are looking for?
Nokia 2610 Cellular Phone Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...