Question about Air Conditioners

3 Answers

Fire turns blue then goes out - Air Conditioners

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Check your power supply and aslo earthing circuit must not be ground.

Posted on Oct 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Air Conditio... Master
  • 13,433 Answers

Your Air Conditioner fire turns blue and then goes out? Can you clarify your problem?

Posted on Oct 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Can you explain the problem in detail?

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help on connecting my a/c thermostat


Determine if the two wire thermostat wire goes to a Condensor on the ground or roof. The red goes to (r)24v on stat. Green(g)fan, white(w)-heater, blue - (y1)-cooling .red 2wirre goes to blue also.white2wire goes to common ( C) terminal.

Apr 20, 2013 | Air Conditioners

1 Answer

My Ruud achhiever 90 starts to fire but as soon as the blower fires the burner goew out. I also noticed that the "igniter" on the end isnt firing. Could that cause the burner to not stay lit when the


There is an ignitor and a flame sensor. If the ignitor does not ignite the gas after a time, it goes out. If the flame sensor does not detect ignition the gas valve closes. When you start it you should see the ignitor come on like a light bulb and glow, then the gas valve opens and you get ignition. Then the flame detector turns on when the ignitor goes out. Flame detectors are like a chrome wire that has one connection to it and it sits part of the way in a burner. They get dirty and corroded. When that happens it shuts down. You can clean the flame detector with steel wool of scotch brite pads. Dont get too carried away doing that though.

Dec 25, 2012 | Air Conditioners

1 Answer

Can not figure out how to wire it so ac works i have only 4 wires coming out of wall blue red white and yellow


Here is a general wiring solution:

Red is hot on a 24 v system, Red goes to "r" on thermostat
White is heat, goes to "w" on the thermostat
Yellow is aircond and goes to "y" on thermostat
Blue is fan and goes to "g" on thermostat

* note: this is typical and could not be 100% sure without pictures of the unit

Apr 11, 2011 | Air Conditioners

1 Answer

The pilot light will not stay on for more than 5min. If I light the fire when its on,it just goes out. The fire is a Fusion 2/7


I assume this is a gas log? If so, you have dust in your pilot assembly. Turn everything off and let it cool. Note the opening where the pilot flames burns. Use the wand from your vacuum cleaner and place it over the opening for the pilot flame. Gently tap the side of the pilot assembly while holdign the vacuum above the opening. This will lift the minute dust particles out and allow the flame to burn nice and blue again. These logs have Oxygen Depletion Valves on them. The pilots are very sensitive to dust.

Jan 18, 2011 | Air Conditioners

1 Answer

I have a Delonghi type Venice fireplace serial no 52013. Normally it has a nice flicker which goes up the back of the fire place and looks like a normal fire. Today the gentle flicker has turned to a very...


Did you fix it as I have a Delonghi Venice electric fire which has just stopped working for no reason? There is electricity going to the circuit board but nothibg is working. Could this be a faulty remote control?

Aug 28, 2010 | Air Conditioners

1 Answer

I have a bryant model 702b packaged unit with 5 wire thermostat wiring coming out of the unit. R Y B G and W. The thermostate in the house is 5 wire and goes to the old central unit and them has a 4 ire...


R-Red is power
Y-Yellow is cool
B-Blue is cool as well
G-Green is fan leg
W-White is usually heat Leg


If you have no indoor unit and this is a ac/gas or
electric outdoor unit try this.

R to R/Red to Red
G-G/Green to Green
Y-Y/Yellow to Yellow
W-W/White to White
-Dont Hook up Blue.

Turn power back on turn the fan to on,fan should run
Turn to Heating, heating should come on
Turn on Cooling,if cooling does not come on switch yellow with blue.

Jul 02, 2010 | Air Conditioners

1 Answer

My Whirlpool furnace (WFCU125D20-1A) is not working. The indicator light is blinking 3 times meaning presure switch. This has hapened in the past.


1.when you turn off power to the unit and retry with power after two minutes does the unit fire up and is there blue flames or is it more white or yellow This could be a blocked intake or exhaust vent also gas pressure could be fluctuating from another gas appliance firing. 2. does the flame jump when the main fan turns on this could be a cracked heat exchanger which is the part where the flame blows in. let me know if this help

Jan 10, 2009 | Air Conditioners

Not finding what you are looking for?
Air Conditioners Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Conditioners Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Bill Long

Level 3 Expert

577 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you an Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...