Question about Air Conditioners

1 Answer

I have changed the themocoupler and controler.The piolt light will not stay lit.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

You may try removing the pilot assemly and cleaning the pilot tub and jet. comon problem

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot turn backlight off on actronair controller lm24


It should be in the installation instruction parameter settings...you need the manual to do this...generally you press 2 buttons @ the same time to access ie fan & up arrow. Just don't change anything unless you know what you are changing. Should be able to download installation instructions...need to know your model tstat.

Dec 17, 2013 | Air Conditioners

1 Answer

Magiglow Elite 18" gas


try the themocouple first can be bought Johnstone OSH Home Depot Lowes

Mar 03, 2011 | Air Conditioners

1 Answer

Model rgdg-100auer 100,000 btu with pilot light. i light the polit that is fine turn on gas that is ok runs for 1 minute then shut all gas off and i have to relight the pilot time after time but never...


If this happens each time the blower starts, you have a crack in the heat exchanger and need to replace furnace. If the blower is not starting, it could be a high limit opening up because of the heat being generated. By pass the high limit circuit to see if it stays on and the blower works. This is only a test procedure, do not continue to run system like this. If you have a manual fan switch, turn it on and then start the heater.

Feb 23, 2011 | Air Conditioners

1 Answer

Pilot light will not stay lit; replaced the thermocouple, still no work. Replaced the W/R gas valve 36C04-222 on my Trane furnace. Still not working. any ideas? Could I have gotten a bad replacement valve?...


Trane unit ,same White -Rogers gas valve. I have replaced both the gas valve and the thermocouple . Have agreat robust blue pilot while the button is pushed in , let go and the flame does not stay lit . I checked the milly D C volts and have better than 20 . Is there a problem with the new gas valve or the couple not generating enough volts or is there a safty I do not know about that could be open ?

Dec 15, 2010 | Air Conditioners

1 Answer

Im calling for heat from the thermastat and control panel, the boiler light and and the fan is running, but no matter how many times i keep re trying the pilot and burner will not commence, is there...


I would check to make sure control on gas valve is in on position and pilot is lit if you have a standing pilot. If you have a spark or hot surface ignitor make sure they are trying to lit pilot. If you have standing pilot model and pilot lit is not on. Turn control on gas valve to off,wait five mins. then turn to pilot. Depress botton and try to light pilot. If it lights hold down for a couple of mins. then release.. If pilot stays lit turn control to on. If thermostat is calling for heat this should bring main burner on. If pilot does not stay lit then replace thermocouple. Hope this helps. Thanks

Nov 16, 2010 | Air Conditioners

1 Answer

Can't find instructions on lennox gf 8 series furnace


Does it have a standing pilot light? On new units, there is an igniter and not a pilot. But if you have a standing pilot, you will move the gas valve to "pilot" and push down the red button while holding a flame under the pilot located by one of the jets. Once it lights continue to hold the button down for a minute or so and then release the button. The pilot should stay lit. Then turn the dial to the on position. That's it.......... If the pilot won't stay lit then the thermocouple is bad and needs to be replaced.

Apr 05, 2009 | Air Conditioners

1 Answer

I have a RUUD heating and air unit, Model number rrka-a042jk10e. This connected to a propane tank, we had ran out of gas and now it is refilled but now the piolt will not light. Is there a reset button


Thanks for your Question,
you will need to bleed the line, as you have air in the lines, once you bleed the line it might take a few trys to get it lit again, but keep trying, it should light, one other thing you may want to do as well after you bleed the line, go to the breaker panel and shut the power off to the furnace, wait about thirty seconds then turn the power back on, that resets the circuit board, then try lighting it, let us know how it went, thanks again,
mr.grzz

Jan 26, 2009 | Air Conditioners

1 Answer

Changed the filter and I'm not getting hot air. how do you light the piolt


If you have a standing pilot then on your gas valve turn it to pilot. Push the button in on the gas valve in the pilot position. Hold for 60 to 120 seconds than release the button a turn to on and the furnace should fire up.

Oct 21, 2008 | Carrier XHB123D X/Y Series Heat/Cool Air...

1 Answer

Starting a Regency fireplace: gas is on, I turn the dial to pilot. I am suppose to push the dial in, spark the themocouple and hold it for 30 seconds. My problem is that the dial doesnt push in. The only...


Can you spark it and does it light in the "off "position? Try it and see if when the pilot stays on, you turn it to pilot and the burner ignites.

Sep 18, 2008 | Air Conditioners

2 Answers

Bosch TF 250 hot water service, can not get the pilot light to stay on...


thre is a sensor thaat goes from the gas valve to the pilot that is called a themocouple change that and you will have no more problem

May 26, 2008 | Air Conditioners

Not finding what you are looking for?
Air Conditioners Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Conditioners Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Bill Long

Level 3 Expert

577 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you an Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...