Question about Projection Televisions

Open Question

Lcd tv samsung le37r74bd . tv was working fine now for some reason the built in freeview isnt working we have one channel and cannot nothing else responds except volume normal tv channels are fine. we cannot retune because nothing is responding once it is on dtv. please help

Posted by on

2 Suggested Answers

SOURCE: we have a sharp lcd

no problem occur on your set but the only problem is you can not lock the fine tuning (in manual procedure) but is it better to set the program to AUTOSCAN OR AUTO PROGRAM and authomatically tune and save to the memory all the program channel

Posted on Apr 29, 2008

SD Tech
  • 14553 Answers

SOURCE: volume control slide stuck on screen nothing in

WS-65809? Unplug set first!

Remove front speaker grill---it should pull out and is secured with pegs.

Behind it you will find an inspection plate---remove the plate---notice the one or two groups of wires coming down from the front keyboard with all the controls.

Follow them to the right behind the inspection plate--you should find one or two plugs---The idea here is to disconnect the keyboard on the front of the set------You will still be able to turn the set on etc with the remote control

With the keyboard disconnected (the plugs if there are two will be different sizes with letters on them so you cannot get them back wrong) plug the set back in and wait about 2 minutes---

Turn it on then with the remote----if set works normally now with the remote one of the micro switches (vol up) on the front keyboard is bad.

You have two choices---leave the plugs undone and just use the remote OR someone has to remove the entire screen from the set and get at the keyboard(it is a small circuit board) to remove/replace whichever tiny micro switch is bad.


Let me know what happens and reply here if you need help of have a question.

Regards, SD TECH

Posted on Oct 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant retune my digtal freeview as my picture keeps freezing


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Jun 02, 2009 | Samsung HL-S5086W 50" HDTV

1 Answer

Unable to access subtitles whilst watching digital channels


Contact your TV service supplier to be sure that subtitles are available in HD ...

Jan 07, 2009 | LG Projection Televisions

1 Answer

Im trying to tune in my old super nintendo my lcd tv that has built in freeveiw but i cant find the channel!


Has your freeview tv got a built in RF i.e (not a digital freeview) tuner? If it hasnt then you wont be able to tune it into your LCD TV by connecting it through your aerial socket. However I think you can get a cable so that you can plug the nintendo directly into a scart or rgb input. Something like this.

http://www.consoleplus.co.uk/product_info.php?pName=av-cable-for-gamecuben64-and-snes&osCsid=0d6106987e4b7a95fc32bf0d45a3b6d1

Then you can just switch to your scart or rgb source on your telly and play on your snes.

Rob

Nov 27, 2008 | Projection Televisions

1 Answer

I have a Daewoo DS608P Freeview box which will not detect any chennels. The pre=scan and scan appear normal, but nothing is detected. The TV, which has no Scart socket, works fine on analogue, and I have...


Sorry to be the bringer of bad news but the transmission mode in the uk is changing & that is why your box will not pick up any channels have a look on http://www.freeview.co.uk/help/faq/id104963 I'm affraid your box is finnished.

Jul 25, 2008 | Projection Televisions

1 Answer

After attaching a freeview box to my Acoustic Solutions LCD32NK750HD 32" inch LCD HD TV the picture started to scramble and **** about the screen, this would stop when I turn the TV off and back on...


How have you got freeveiw connected to your set and what input are you using?
when connecting the freeveiw unit to the tv did you have the power connected and turned on to either tv or freeveiw?
how many sets are connected to the freeveiw unit,
All these things can affect this equation,

it sounds like the set had a power surge from the plugging in of the freeview,
the f connection output from the freeveiw set has a live voltage feed that powers either the mast head amp or the balun in the center of the dish,
for these to work correctly the cable between the freeveiw and the aerial/dish needs power,
this annoying little fault can only be remedied by taking it to the repair man,

Let us know the outcome thanks ,
hope this helps,

Jul 19, 2008 | Projection Televisions

2 Answers

No channels can be detected have tried 2 Daewoo DS608P boxes connected to same telly but same thing happens. Signal strength seems fine boxes have been working fine for years.


I am the same. Not a sausage from my same model Daewoo freeview box today. Scans and re-scans and not a single channel to be detected.
Rob

Jul 05, 2008 | Projection Televisions

1 Answer

HAVE AN AERIAL CNNECTED TO MY TV BUT WHEN I DO A TUNE IT SAYS THERE IS NOT SIGNAL? ANY IDEAS. IT IS A WHARFEDALE WITH BUILT IN FREEVIEW


If you know your aerial is ok check if you can receive any analogue channels if not, is the tv going in to search but not finding anything. If it is a LCD tv I have had problems with the prescaler chip but be aware there are two versions of chassis with different prescaler boards.

Jun 02, 2008 | Projection Televisions

1 Answer

We have a sharp lcd tv c/w built freeview,the last couple of weeks it keeps losing just 1 channel ie bbc1 or itv1 every other channel is fine if we retune the tv everything goes back to normal, is it the...


no problem occur on your set but the only problem is you can not lock the fine tuning (in manual procedure) but is it better to set the program to AUTOSCAN OR AUTO PROGRAM and authomatically tune and save to the memory all the program channel

Apr 29, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...