Dell W2600 Stand needed

If you search on Ebay for your TV's exact model number, sometimes you can find a replacement stand for it there from someone who has their TV mounted to the wall and is no longer using it. These are normally fairly heavy and bulky items, so Ebay purchase prices and shipping costs can vary widely.

I did not see any for your exact model of TV available there when I looked, but the online selection changes daily, so you can always keep checking back. Just search on Ebay for 'HITACHI TV STAND' or 'HITACHI TV BASE' and you will see a wide variety of them available for different Hitachi TV models as well as what the average price for them is. Otherwise you can just buy a generic wall mount floor stand for around $100 which bolts to the TV like a wall mount, but actually sits on the floor instead of being bolted to the wall.

Here are some links to a few different models currently available on Ebay which include pictures so you can see what I mean:


http://cgi.ebay.com/PLASMA-LCD-FLAT-PANEL-MOUNT-TV-STAND-WALL-SHELF-STAND-/390330001764?pt=LH_DefaultDomain_0&hash=item5ae17b2964



http://cgi.ebay.com/Plasma-LCD-Flat-Panel-Console-Shelf-Wall-Mount-TV-Stand-/270797719452?pt=LH_DefaultDomain_0&hash=item3f0ccd479c



I hope that was helpful to you, good luck and take care.

Joe.

If you search on Ebay for your TV's exact model number, sometimes you can find a replacement stand for it there.

Here is a link to one example currently available for an Emerson TV:

http://cgi.ebay.com/Emerson-LC320EM8A-32-Inch-LCD-Flat-Panel-TV-BASE-STAND-/110728286130?pt=LH_DefaultDomain_0&hash=item19c7eb8fb2


Otherwise you can just buy a generic wall mount floor stand for around $100 which bolts to the TV like a wall mount, but actually sits on the floor instead of being bolted to the wall.

Here are some links to a few different models currently available on Ebay which include pictures so you can see what I mean:


http://cgi.ebay.com/PLASMA-LCD-FLAT-PANEL-MOUNT-TV-STAND-WALL-SHELF-STAND-/390330001764?pt=LH_DefaultDomain_0&hash=item5ae17b2964



http://cgi.ebay.com/Plasma-LCD-Flat-Panel-Console-Shelf-Wall-Mount-TV-Stand-/270797719452?pt=LH_DefaultDomain_0&hash=item3f0ccd479c



I hope that was helpful to you, good luck and take care.

If you choose to rate this solution by clicking on the YES THIS WAS HELPFUL icon, I thank you very much for your time and consideration.

Joe.

http://www.shopjimmy.com/catalogsearch/result/?q=W2600

Back lights invereter or power supply. look for 24vdc on the power supply which is needed for the inveeter board.
look for bad caps in the power supply.

Just take off the stand altogether if you can lay the TV close enough to a solid vertical support.

My 47'' Philips spent about a year without a stand sitting on a desk and leaning on a wall.

It's heavy enough and as you approach to completely vertical position its main force will be pointing down, not forward.

If you can't lean it on anything solid or if it doesn't sit well while in an entertainment center...not sure what I'd suggest....short of adjustable wall mount stands...

It will either slide out from the front/back or to the side..Some actually bolt on from the bottom using screws/bolts.And then again some are not meant to be taken off.Make sure it is a wall mountable tv.Then try to take the stand off as directed.

The cheapest I have found is Videosecu Dual Arm TV Wall Mount Bracket for Sony Bravia 32 37 40 42 46 50... on amazon. I hope this was helpful. regards

Dell will replace it if it's less than 3 yrs old but apparently their tech support people are clueless about this and have to be told what they need to look up. The replacement is a nice gesture except if you're like me and paid >$1,000 for this more than 3 yrs ago. I have had TV's > 20 yrs and don't reacall major problems with any.

These instructions were posted on the Dell Community forum http://en.community.dell.com/forums/
"
The following in and out of warranty TVs (W2600, W2306C, W2606C) with the No Power issue must go through Technical Support to initiate the exchange. Tell the technician to look up the following DSN document IDs to get the details on the in and out of warranty exchange process:
- 313698 Dell-Branded TVs Out-of-Warranty Repair Procedure - CTS/CBG/SMB/GTS-T/DOC. Tell them to scroll down to, Dell W2306C, W2606C, or W2600 TV Replacement for a No Power Issue
- 329986 TVs (W2600, W2306C, W2606C) with No Power. New exchange procedure - TV and Home Theater - Dell Community Forum
* Dell will cover this issue, regardless of the limited warranty status, for the W2306C, W2606C or W2600 TVs for 3 years from the original invoice date
* Once past the 3 year date from the original invoice date, we will not exchange the TV
* Units sent as replacements for this issue should be considered in warranty for 90 days after the replacement or for the remainder of the limited warranty term, whichever is longer

* You will need to provide to them the following information -
TV Service tag number:
TV Order number:
Name:
Shipping address:
Phone number:
Email address:
Reason: Dell LCD TV has the No Power issue

did you figure this out? I only ask because I need the stand for my TV. Could you sell me yours?

Thanks

Anthony
[email protected]

You would need an actual wall mount bracket for your TV. Here is a link that you should be able to find what your looking for.
http://www.mountsandmore.com/TV-Mounts-C135.html?refid=OV81.tv+wall+mount

>you can try this: Replace capacitor (10uF/50V) on small board >mounted to power supply next to mother board power connector.

didn't work for me. any other suggestions?