Question about Pioneer PureVision PDP-4340HD 43 in. Plasma HDTV

1 Answer

Pioneer PDP-503PU Please i have pioneer model #PDP 503PU and it is not working when turn it on it turn green and goes back to red flashes three times ,Please could you tell me it is power supply or y sustain board.THANK YOU.

Posted by on

  • 1 more comment 
  • Anonymous Feb 01, 2009

    The light won't turn green , so the TV won't turn on. When it does turn on the screen say E03, then turns off

  • kmarfo46 Feb 28, 2009

    i have a pioneer pdp 43 fde and it switches off to standby with a red flashing light during use. The red light flashes contunously ten times then pauses for a while then begins again. i understand i could be a problem with the power board. is it true?? please advise



    kwame

  • Anonymous Mar 20, 2014

    WEIGHT?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Very possible,but yet,this might be the manufacturer defect power supply which they will fix it for you free;but before we jump to this conclusion,you need to test it first:
-Unplug the power cords.
-Unplug the media video cable from the box to the tv.
-Check all the pins on the video cable are in place as well as the connectors both behind the TV and the media box.
-Reconnect the media box and TV with the video cable(DVI+VGA in one) and have at least a video component hook up to it(ex. dvd player/VCR or comcast box) be sure this video player is turn on and running,at the same time,be sure it is under the right video input.
If you have tried the above steps but still doesn't work,call 1-800-pioneer Tuesday-Thursday at7amPST and address your issue to them.
Let me know if you have any additional questions!
solutiondoct

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pioneer pdp-r05XE, on the plasma, the light flashes green and red alternately whilst on the receiver it flashes green 6 times. I can't get the tv to turn on...


Unplug if you have not done so BOTH units from power for several minutes (any cable or satellite box also connected.

wait several minutes and restore power to all units which may allow them to reboot.

Cannot hurt and may help.

Dec 06, 2012 | Flat Panel Televisions

2 Answers

2yr old Pioneer pdp-506 50" panel with seperate receiver unit


YOUR MAIN CONTROLLER IC (processor) is damaged you cant try ressiting it but I'm sure it wont work you need to get it professionally repaird by a qualified technician

Jan 02, 2008 | Flat Panel Televisions

3 Answers

Tv won't come on...light in corner just blinks red


OK Its your power supply and it can be fixd for free due to a recall.
PLEASE READ BELOW what I found out.
Here's the whole notice:

Important: Free Power Supply Replacement for Certain Pioneer Plasmas

Pioneer is continuing to offer a free, in-home power supply replacement for certain of its second and third generation plasma models listed below for consumers who experience a problem with the original power supply. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken.

If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded in your home at no charge.

Consumer Plasma Models (12 listed):

PDP-505HD
PDP-503PU
PDP-5030HD
PDP-5031HD
PDP-433PU
PDP-4300
PDP-4310
PDP-4330HD
PRO-800HD
PRO-800HDI
PRO-1000HD
PRO-1000HDI
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

We apologize for any inconvenience, and we thank you for your cooperation.

Apr 02, 2010 | Pioneer PureVision Pro-800HD 43 in. Plasma...

1 Answer

Pioneer PDP 4330HD display flashes red LED 4 times


Hello,

Just seeing if you had resolved the problem as my mum's Pioneer PDP-433HDE which she bought back 2002 has developed this same fault.

It has been a perfect TV and done very well with plenty of good use, but I have a feeling the cost of repair - even if it is possibale will be costly.

Cheers

Nigel

Mar 13, 2010 | Pioneer PureVision PDP-4330HD 43 in....

1 Answer

Plasma tv stopped working


hi i have a pioneer plasma tv pdpro4e all it doses is flash green red green red and on the mediar reciver as well tv dont come on help please

Dec 31, 2009 | Flat Panel Televisions

1 Answer

Monitor on switch goes onto green for 3 seconds and then turns to a flashing red, which flashes 5 times quickly,and repeats every few seconds. model is pioneer plasma display system noPDP503HDE


Thats a Factory shut down .... caused by a fault usually the power supply
Sorry it's a factory repair issue
make sure all the connections are tight
and try one more time .... sorry
LB

Sep 19, 2008 | Pioneer PureVision PDP-503HDE 50 in....

2 Answers

Loud pop and tv went off...


Here is a solution from the Pioneer web site:

http://www.pioneerelectronics.com/PUSA/Support/Important%3A+Updated+Information+Regarding+Free+Power+Supply+Replacement+for+Certain+Pioneer+Plasmas
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):
  • PDP-505HD
  • PDP-503PU
  • PDP-5030HD
  • PDP-5031HD
  • PDP-433PU
  • PDP-4300
  • PDP-4310
  • PDP-4330HD
  • PRO-800HD
  • PRO-800HDI
  • PRO-1000HD
  • PRO-1000HDI
  • PDP-433CMX
  • PDP-502MX
  • PDP-503CMX
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.

Aug 09, 2008 | Pioneer PureVision Pro-800HD 43 in. Plasma...

2 Answers

Pioneer plasma tv pdp-503pu 50"


I HAD THE SAME PROBLEM AND I CALLED PIONEER AND IT TURNED OUT TO BE A POWER SUPPLY, PIONEER IS FIXING SOME MODELS WITH THE DEFECTIVE POWER SUPPLIES FOR FREE LOOK ON THEIR WEBSITE

Jul 31, 2008 | Pioneer PureVision PDP-4340HD 43 in....

1 Answer

Pioneer pro800hd plasma just made a loud pop and then went to black the power button(red led) is flashing. power supply??, flyback xformer??? any ideas. worth fixing??


The affected models of consumer plasmas are listed below. Anyone who owns or uses one of these models may contact Pioneer through its toll free hotline at 800-421-1404 to arrange for the free, in-home upgrade. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken. If consumers are not sure if their plasma is affected, they should call the toll free hotline for confirmation.
Consumer Plasma Models (13 listed): PDP-505HD PDP-4330HD PDP-503PU PDP-4300 PDP-5030HD PDP-4304 PDP-5031HD PDP-4310 PRO-1000HD PRO-800HD PRO-1000HDI PRO-800HDI PDP-433PU

Dec 30, 2007 | Pioneer PureVision Pro-800HD 43 in. Plasma...

Not finding what you are looking for?
Pioneer PureVision PDP-4340HD 43 in. Plasma HDTV Logo

1,498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Flat Panel Televisions Experts

gbob59

Level 3 Expert

2963 Answers

Cindy Wells

Level 3 Expert

4751 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2608 Answers

Are you a Pioneer Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...