I am getting an error flashing message. When I press the shutter, the entire camera locks up. I turn it off, the message goes away, when I press the shutter button, it returned. My f/ setting is on f/22.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usually when my shutter won't operate, I get an ERR message. I have been able to fix it by turning the camera off and back on. If that doesn't work, I have occasionally had to remove and reinstall the battery.
The D-90 users manual says that the ERR message indicates a camera malfunction and can be cleared by releasing the shutter. But, I found the shutter won't release unless you turn the camera off.
The manual also says if this condition occurs frequently or persists, you should contact an Nikon authorized repair center. I suggest before you do that, that you contact Nikon tech support at www.nikon.com to see what they might suggest.
r09 is just the camera estimate od how many shots you have left on your memory card. For the other, Use fully charged battery , Turm ca,era on and re,ove battery while at same time holding shutter for a[[rox 3- seconds. Re[lace battery, then turn camera off.on. If that does not do it, turn camera on and press reset button on bottom of camera (page 200, I believe, in tghe users manual
Read the manual on how to do a two-button reset. Also: from the nNikon Support Page on the D70::
It has come to our attention that select electrical components in a limited number of D70 cameras may, in some instances, fail affecting camera performance and/or operability.
While only a limited number of D70 cameras are affected by this advisory, if (1) when a memory card is inserted, your D70's memory card access lamp blinks, locking camera operations and preventing operation, or (2) with no memory card inserted, the camera will not turn on despite the battery indicator showing a fully charged battery, Nikon Inc. will service it free of charge.
To obtain complimentary service for cameras affected by this advisory, please click the link below to download and print the Service Return Form. The Service Return Form provides return instructions.
The Frequently Asked Questions button at the bottom of this page offers more information about this advisory and, should you have more questions, also provides information about how to contact Nikon.
We apologize for any inconvenience you may experience.
I'm looking for the source of this same problem. I was able to get my d70 unstuck by: 1. Set to full manual mode. 2. In the menus set mirror lock up to yes and then press shutter release. 3. Turn camera off and then back on
Sounds like the shutter is sticking. This could be due to damage or just need cleaning. This probably means that you need to get the camera professionally serviced/fixed as shutters are extremely delicate.
Some digital SLR camera have a mirror lock and others have a viewfinder shutter
In each case this will be a knob in the region of the viewfinder that turns.
Check that this model has it and it has not be inadvertently turned.
Then come back
rXX on the LCD normally indicates how many exposures the buffer can currently hold. I'm not sure why you're getting this problem but try the camera on a different quality setting to see if you still get r10 or if the message changes.