Question about Black & Decker String Trimmer Cordless 12" 18V

Open Question

The strimmer nylon cord has been completely stripped and I can't get into the spool.

Black and Decker GLC 2500 18V battery strimmer.

Posted by on

  • tony2236 Apr 05, 2009

    Very helpful, thankyou.

×

6 Suggested Answers

  • 9 Answers

SOURCE: how do u rewind a

if it is going back onside or unwinding it proble is in upsidedown or wond backwords

Posted on Jul 30, 2008

  • 1 Answer

SOURCE: how to thread spool for black and decker strimmer

rethread grasshog

Posted on Apr 25, 2009

thydzik
  • 86 Answers

SOURCE: How do you fit a new spool?

refer to here for generic instructions of replacing the wire/string on a trimmer.

http://wiki.answers.com/Q/How_do_you_replace_a_weed_eater_trimmer_line

have a read through, it may help assist you.

Posted on Jul 21, 2009

  • 133 Answers

SOURCE: i have a black & decker gt701 strimmer. i

Remove cup from bottom of unit by depressing 2 detent tabs and pulling away from unit.
Replace empty spool with new full one or wind on aftermarket string. Wind in direction of
arrow on spool. Make sure spool is seated on rachet firmly.

Posted on Apr 21, 2010

pcb1970
  • 1 Answer

SOURCE: Black & Decker GL720 Strimmer not working

Belt came off so and I couldn't see the part that seem to be missing that kept the belt on. A nut, bolt and a wash sorted it for me. Fitted to the small drive cog. Simples. When dismantling - remember there is a screw under the sticker!

Posted on Jun 19, 2010

budgie140
  • 501 Answers

SOURCE: How do i fit the spool on my black and decker

guide the two strings thru the holes in the outer ring,then push it down into place,and screw knob on

Posted on Jul 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GL 320 String trimmer - nylon string keeps breaking


It sounds like the sting is wound backwards. Try winding a short piece in the opposite direction. If it is backwards, it will be gone in a hurry.

Apr 16, 2010 | Black & Decker String Trimmer Cordless 12"...

1 Answer

I have a black & decker gt701 strimmer. i recently replaced the line on the spool but now it wont feed, ??


Remove cup from bottom of unit by depressing 2 detent tabs and pulling away from unit.
Replace empty spool with new full one or wind on aftermarket string. Wind in direction of
arrow on spool. Make sure spool is seated on rachet firmly.

Apr 16, 2010 | Black & Decker Lawn Trimmers & Edgers

1 Answer

How do i replace strimmer wire on a black and decker 315


how do i replace a spool and line on a black and decker GL20 strimmer x

Sep 10, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

How do you fit a new spool?


refer to here for generic instructions of replacing the wire/string on a trimmer.

http://wiki.answers.com/Q/How_do_you_replace_a_weed_eater_trimmer_line

have a read through, it may help assist you.

Jul 21, 2009 | Black & Decker Lawn Trimmers & Edgers

2 Answers

Threading line on black & decker GL301 strimmer


Do you mean that the string keeps feeding as you try to operate the trimmer?

If so, you are winding the string on the spool the wrong way. Put the string on the spool in a clockwise direction. This should do it.

Jim

Jun 19, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

Got a Black & Decker GL301 strimmer but have lost instruction manual. dont know how to fit new cutting wire


Go to Homebase, B&Q, Ebay or your local hardware shop and buy a new spool, ALM part number BD032.

Jun 01, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

How do I rethread the cutting line on a black and decker strimmer reflex plus


take the spool out there shood be a I hole to push the twine throu tie a not that wont come out look for dirtion or arrow to wind it leave enough to sitck thru the side where the twine cuts push the spool up and lock it

Jul 27, 2008 | Black & Decker String Trimmer Cordless 12"...

1 Answer

How can i repace the line on a black & decker strimmer gl550


Instructions can be found at: https://www.2helpu.com/PDMSDocuments/EU/Docs//docpdf/gl550_uk.pdf.

If the line keeps getting too long, it's because swivel 14 in diagram 7 was in the wrong position when you inserted the spool - just move it to the ouside position, re-insert the spool and away you go. Frankie.

Apr 20, 2008 | Black & Decker String Trimmer Cordless 12"...

Not finding what you are looking for?
Black & Decker String Trimmer Cordless 12" 18V Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Lawn Trimmers & Edgers Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a Black & Decker Lawn Trimmer and Edger Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...