Question about Sony KP-51WS510 51" Rear Projection HDTV-Ready Television

1 Answer

Rear projection out

Sounds like I may have a convergence problem or Ics What exactly is this? Does that have to do anything with the mother board? I also have the kp-
51ws510 also made in nov. 2003 This is the second time having it repaired the fist time was the red green converser and the mother board was replaced. this is why i am asking. I am some what good with thing but when you start talking the lingo not so good. Any suggestions.

Posted by on

  • en14374 Oct 10, 2008

    My Convergence( the crosshairs Red, Blue, and Green) are out of line.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

See below exploded view of your Sony KP-51WS510 TV showing boards...

rear projection out - d93b19d.jpg

D board is Deflection Board and has convergence ICs qty 02. If tv has problem of convergence, either you need to replace complete board or replace defective parts ( STK ICs) check IC8001 & IC8002 in D board.
If you have electronics knowledge and experience of tv repair, you can make it.
Related service manual of product made things easy because of information, parts location, applied voltages, part numbers and descriptions etc.
Need further help, let me know to provide you more info.
Thank you.

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic PT-53wx54j" Rear Projection Television blinking light 3 times, wont turn back on. Originally turned off by itself


sounds like a bad power supply my mother has one done the same thing we found out he power supply went bad $125 to fix so we junked it and she bought another TV

Jan 29, 2014 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

I have bleeding colors on my panasonic 53 can I


This problems adjustment well not work.Ur tv have a problems known as convergence problems,and it dead.The tv convergence board must have it 2 STK convergence ICS,and some or all it resistors, must be change.The shop will cost u $300-350 for parts and labors.

May 22, 2010 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Have Sony KP-57ws500 rear projection i had the bulbs replaced 3 years ago now itseams as if everyting is out of focus.images outlined in green and red.


Hi,
It sounds TV got convergence out ICs failure problem and causing 3D image or outlined picture.
There are 2 convergence out ICs mounted on D board in TV that need to be replaced.
Let me know if you need part number of ICs if you want to replace by yourself or call local Tv tech to fix it.
Thanks.


Dec 04, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

JVC AV-65WP74 clicks and sounds like a heart beating and then turns off. what is the problem, how much will a repair cost?


it could either be convergence ics shorted or deflection board trouble
as to cost convergence 300 to 350
if its power supply 300.400
it would have to be isolated down to the exact location causing the problem
but usualy a great set to keep around

Oct 24, 2009 | JVC AV-65WP74 Rear Projection Television

1 Answer

Double vision in red and green


Its failure of convergence ICs and will be replaced.
Convergence ICs are mounted on silver heat-sink on D board of TV
Let me know exact model number to help you with more technical info.

Mar 21, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Rca p 52939 picture is warped and color is off someone said possible dcu failure


Sounds like you have nad solder connections on your convergence ICs. Locate the convergence board (usually a long narrow board) and resolder the convergence ICs. These run very hot and tend to loosen the factory solder, causing a lose of convergence (color being off) and geometry.

Jan 08, 2009 | RCA P52939 52" Rear Projection Television

1 Answer

Sony kp 51hw40 real projection tv


Below is exploded view of your Sony KP-51HW40 TV rear side which shows board names and location.
You need to check D Board for convergence ICs and these are marked as IC8001 & IC8002 on circuit board.

097a23d.jpg

Nov 23, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Convergence issues


if youre having convergence issues with your samsung HC-P4752W you need to replace both convergence ICs numbers STK392-010 they are available at the following link and they provide free instalation instructions with pics so you can do the repair your self and they also give free tech support in case you need extra help. Its an easy repair takes about an hour from start to finish, Changing the convergence board wont help as the Convergence ICs are located on the sub deflection board and thats about 400 to replace the board compared to 50 to replace the ICs. Heres the link.
http://servicemanuals.vstore.ca/

May 12, 2008 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

JVC 48WP30


I need to get a free email address before I can send anything.
You will have to check a few other things before you put in the new ICs.

Apr 14, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Zenith r56w36


Unless you can do TV repair your out of luck on this one! Replace your convergence board or ship it for repair cheapest way.You must remeber to connect board exactly the way it hooks up , convergence board has 2 ics on it STK392-120 these ics go bad all the time and when you press auto they quit working.If you need any more help let me know. ThankYou for using FixYa. Have a Nice Day.

Feb 07, 2008 | Zenith R56W36 56" Rear Projection...

Not finding what you are looking for?
Sony KP-51WS510 51" Rear Projection HDTV-Ready Television Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...