I work for a school district. Our IT classes would like to bring in home made DVDs but the picture doesn't show up. I can operate the DVD from imovie but again no picture. I should be able to bring something from the HDD drive too, right?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like the rails that the laser runs along have debris on them.
Or, there's a firmware bug in the unit.
Check into restoring factory defaults. I did the same on a Philips DVD recorder and it came back
Have you tried using a different brand disc. When I first purchased my DVM-600 it would not record on Memorex discs. I purchased TDK -R discs and all is fine. In the old-school analog world, all specific format tapes were computable to all machines. In other words, a VHS tape recorded in your VHS recorder will play back in my machine and every other VHS machine. Because the DVD format has so many formats and standards, compatability issues are quite common.
here,s a thought,i know from knowledge of these dvd/dvd prayers.they get hot and the motors sometime burn out in them,could be one problem try cleaning it with a drive cleaning cd and or keepnig it it a cool place,also most of those need to be power with the hdd hi tech cables,not the old fashion kind,good luck.hope i helped
This is supposedly the formula to fix the problem of getting Final Cut to communicate with the DVM600:
My friend had to do this on his machine, but now that I'm borrowing his DVM600, I can't get it to work on either of my Macs.
It's for a different model, but it works the same.
In a nutshell, when the "AV/C Tuner" driver request comes up, just cancel the install. Then, it will want an "AV/C Tape Recorder/Player" driver. It "should" install automatically and be instantly recognized. If not, follow the instructions in the guide.
There are also instructions in there for disabling the "Av/C Tuner" every time the deck gets connected. Hope this helps - worked for me! - cliffpro.com