Question about Sony DRU-820A DVD RW Dual Layer Burner

2 Answers

Sony DRU-820A DVD RW Dual Layer Burner not working

Sir, i've just replaced my casing, then installed all hardwares back, then suddenly my sony dru-820a didnt work, why? but the dvdrw is detected by the bios and also can ejected by using windows explorer, please help me, TIA

Posted by on

  • DMccomsey Nov 03, 2008

    The drive runs and makes a loud noise but can't find CD or play movies. It was
    working ok till it started to make the noise. Can you tell me what happend?


×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 192 Answers

Hi there,

Download the most current drivers for your Chipset. Uninstall the drive via Device Manager, restart your system and let Windows install it. Update to the latest Windows Service Pack. Download the updated Firmware version and internal drivers from here:
http://sony.storagesupport.com/product/125#documents

Hope this solves your problem

Regards,
Tim

Posted on Dec 10, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Here's the first thing Sony says on the subject:

Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.

My MSI P45D3 has a single IDE channel...
ARG!!!!!!!

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sony DVD DRU-820A burner. When I insert a dvd--either a blank one to burn or a DVD disc to view--the name of the drive switches from DVD-RAM Drive (D:) to CD Drive (D:). The burner no longer burns...


The device is _partially_ broken -- the part that reads/writes DVD media is "dead".

Spend $40 to purchase a new CD/DVD reader/writer, to replace the "dead" unit.

Dec 20, 2010 | Sony DRU-820A DVD RW Dual Layer Burner

1 Answer

I am lookinf for a restore driver for my sony double layer player


yoiu do not need drivers in windows 2000 and above for any cd/dvd player/burner. check if it is listed in your hardware, if not then check inside if it is actually physicaly connected.

you did not provide any information what is the problem, what operating system and what computer specs are. if you require more detailed help, do provide these details first please.

Jul 20, 2010 | Sony DRU-820A DVD RW Dual Layer Burner

1 Answer

I have a sony dru 820a dvd writer,it is not detecting the cd/dvd when inserted but it makes some wierd sound and does not read the inserted media. it was also interferring with booting of PC but once the...


ur registry is corrupt...
try cleaning the registy
visit my website www.sureshayyar.110mb.com

go to dowload page in there...get Tuneup Utility...install, clean the registry....
also try runing chkdsk...if u know how to do it...
all the best

Dec 25, 2009 | Sony DRU-820A DVD RW Dual Layer Burner

1 Answer

Sony dru-820a not working


Check the divece settings in the bios i.e. SATA, ATA, IDE

Oct 07, 2008 | Sony DRU-820A DVD RW Dual Layer Burner

1 Answer

Sony DVD RW DRU-820A


Hi,
did you try to do the emergency eject ?
jewellers driver in drive pinhole.
use the eject method again, Computer powered Off. Open the drawer and push it back in firmly.
This is an eject button, make/break switch problem.
Also try ejecting the drive from my computer/Right click with mouse ( CD Drive ) Eject.
And ensure the 4 Pin Molex ( Red-Black-Black-Yellow ) is the right way round. Yellow usually faces to the outside of the casing.

Mike @ compurepair.

Jul 01, 2008 | Sony DRU-820A DVD RW Dual Layer Burner

1 Answer

Sony DVD RW DRU-820A


HI,
Double check the Ribbon Cable Connector is installed Correctly ( 40-80 Strand IDE ) sometimes if these are not fitted squarely Or pushed in hard enough. Can cause a Problem.
Also try the emergency eject procedure on The Drive. Small jewellers screwdriver Or Needle, insert into the drives faceplate ( pinhole in drives faceplate drawer ) push to open dvd drawer. pull out drawer Gently. And push back in. This ocassionally works for a stcking Drawer/eject mechanism.
Finally try the drive without a disk in ( open/eject Or Close )

Mike @ Compurepair.

Jul 01, 2008 | Sony DRU-820A DVD RW Dual Layer Burner

1 Answer

Can make a data dvd but cannot read it on comp. but can read it on another comp


Resolved, unsure what I did but a full re-install of xp and all is working after I did my final windows updates. keep in mind that a fresh install of winxp sp2 with none of 88 recommended patches it still wasnt working

Jan 05, 2008 | Sony DRU-820A DVD RW Dual Layer Burner

Not finding what you are looking for?
Sony DRU-820A DVD RW Dual Layer Burner Logo

Related Topics:

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony CD & DVD Burners Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Sony CD and DVD Burner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...