Question about Remote Controls
Can't find the code I used to program the remote for power on.
It currently defaults to Time-Warner Cable's news channel.
After upgrading to HD-DVR box, I can't find the sequence of buttons I pushed to program the cable box to power on to the last channel I was watching when I powered off.
Actually, there is a setting in the cable box for this. You hit the settings button on the remote TWICE, then scroll down to Viewer:Power On. Click on what channel (or last channel) you want it to go to when you power on. Hope this helps. I have the 8300 HDC DVR.
Posted on Jan 12, 2009
Tips for a great answer:
Jul 02, 2014 | Remote Controls
Mar 02, 2013 | Remote Controls
Oct 02, 2012 | Remote Controls
In the CBL/SAT or TV mode, use the FAV key to start a 3-second scan of all
channels.Or, if programmed, use the FAV key to scan only your favorite
channels to view a desired channel
Press CBL/SAT or TV once.
Press FAV once.
• IfFavorite Channel Scan has been set up, scanning of
favorite channels will start with up to 100 channel changes
or until stopped by pressing any key.
IfFavorite Channel Scan has not been set up, scanning
will start with the current channel, and continue up to
100 channel changes or until stopped by pressing any key.
To stop scanning channels at any time, press any key
Mar 24, 2011 | One For All URC-4021 Remote Control
Sep 23, 2009 | RCA 3-Device Universal Remote
Jun 25, 2009 | Brookstone 538744 Remote Control
Dec 01, 2008 | Philips Magnavox Learning Universal Remote
Nov 24, 2008 | Philips Magnavox Learning Universal Remote
732 people viewed this question
Usually answered in minutes!