Question about Clock Radios

1 Answer

Sentry CR-106: setting the projector's time.

The Sentry CR-106 Clock Radio is a nifty clock radio which can project the time onto the wall or ceiling. Unfortunately, the projected time does not automatically match the display time, and I have absolutely no idea how to set the projected time. I have been unable to find an instruction manual online. Any ideas for me?

Thanks!

Tom

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found my manual!

To set month, press the "set" button 2 times then press "mode" to sequence month
To set date, press the "set" button 3 times then press "mode" to sequence date
To set hour, press the "set" 4 button times then press "mode" to sequence hour. (24 hour clock toggles with 12 hour clock)
To set minutes, press the "set" button 5 times then press "mode" to sequence minutes.
I hope this helps!

Posted on Apr 28, 2014

6 Suggested Answers

  • 10 Answers

SOURCE: Teac R2 clock radio--Cannot set the clock.

Press and hold the CLOCK ADJUST button for more than 3 seconds.
"SET" and "CLK" appear alternately in the display.
Turn the MULTI JOG knob to adjust time.
Press the CLOCK ADJUST button again to finish.

Posted on Jan 03, 2009

  • 5 Answers

SOURCE: reset cd clock radio? (manual missing)

Make sure the clock is in standby mode, as opposed to playback mode. Press time set button — the clock digits will blink. If they don't, you're in playback mode. Press the hour button to adjust the hour. Press the minute button to adjust the minute. Press time set button to confirm the time.

Posted on Feb 15, 2009

  • 1 Answer

SOURCE: Instructions to 'science museum' radio controlled alarm clock

press the alarm button (so the alarm time is on the screen) then the + button. do the same to deactivate the alarm.
it took me forever to work this out after losing my instructions, feel a bit of an idiot now it seems so simple

Posted on Mar 10, 2010

jyackle5
  • 8197 Answers

SOURCE: Emerson cks3528 Dual alarm clock radio smartset

You can get the manual on the link below. Please alow time to load large file.

http://www.emersonradio.com/owners/SmartSet%20Series/CKS3528_110606.pdf

Good Luck and please rate 4 thumbs up for the free answer

Posted on Apr 24, 2010

Testimonial: "Thanks SO MUCH!!!! I've tried every button or set of buttons to set the "wrong" time zone for correct DST just to mess up Date too. Thank you SIR!"

  • 1 Answer

SOURCE: alarm clock came with chinese instructions manual,I need English

The projection light switches off after a few seconds... how to make that permanently light up?

Posted on Jun 05, 2010

  • 1 Answer

SOURCE: instruction manual for a Tevion clock radio

how to set the alarm on Tevion fm/am digital alarm clock

Posted on Aug 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set alarm on sentry cr103 clock radio?


You can try contacting Sentry directly to request a manual.

Sep 06, 2014 | Sentry CR104 Clock Radio

1 Answer

How do i set time on sentry radio controlled alarm clock


I lost the directions to set my Sentry Radio Controlled clock.......
.
Can anyone help me?

Nov 18, 2012 | Clock Radios

1 Answer

How do you set the time on the clocl.


CLOCK SETTING
1. To set hour, while holding the CLOCK button, press H TIME until
the desired hour is displayed. Then, release both buttons.
2. To set minute, while holding the CLOCK button, press TIME M
until the desired minute is displayed. Then, release both buttons.

Similal manual may be useful:

http://www.cobyusa.com/files/manuals/CRA58_MN.pdf

Sep 20, 2010 | Coby CR-A98 Clock Radio

1 Answer

How do I set my Sentry talking clock?


Many Sentry product manuals can be down loaded from the following URL
http://www.sentryindustries.com/support/manuals.asp
The instructions for Sentry CR104 is located at the following URL
http://www.sentryindustries.com/pdf/instructions/CR104_instructions.pdf

This may be unrelated to your problem, but
I have noticed sometimes the instructions tell you to use the ADJUST key.
If that does not work try the SET key sometimes it will work instead of the ADJUST key.

Mar 12, 2010 | Sentry CR104 Clock Radio

2 Answers

How can I set the timezone on my Sentry self-setting atomic clock?


Many Sentry product manuals can be down loaded from the following URL
http://www.sentryindustries.com/support/manuals.asp
The instructions for Sentry CR104 is located at the following URL
http://www.sentryindustries.com/pdf/instructions/CR104_instructions.pdf
I have noticed sometimes the instructions tell you to use the ADJUST key.
If that does not work try the SET key sometimes it will work instead of the ADJUST key.

Jan 09, 2010 | Sentry CR104 Clock Radio

1 Answer

My smartset clock/radio justed stopped working shortly after the 90 day warranty. I don't know if replacing the CR 2430 lithium battery will resolve the problem, but I no longer see the time. The...


I just experienced the same problem this week.  Don't waste the money on the battery as it did not help...still no lights.  I'm very disappointed as I'm, also, out of warranty and I really liked this clock.

Aug 07, 2009 | Emerson Smartset Clock Radio

1 Answer

Skyscan 34202 Projection


I doubt there is a way to change that, but it's also not clear which way it's supposed to go anyway.  Mine projects "right side up" if you are facing the same direction as the clock is facing - that is imagine you are looking away from the face of the clock.  It is upside down if you are looking at the clock's readout.  One way to solve the problem would be for you to turn the wheel of the projector to make it face the opposite wall.  It will then be right side up.

Oct 11, 2008 | SkyScan 34202 Clock Radio

1 Answer

Emerson Smart Set Clock Radio CKS3095S


You need to reset the microprocessor in the Clock/Radio. To do this you must unplug the Clock/Radio from the A/C source. You must also remove the internal battery (CR2430). You must let the Clock/Radio set without any power source for at least 3 hours to allow all the power to drain from the microprocessor. After the power has drained from the microprocessor, you can reinsert the internal battery and reconnect the Clock/Radio to the A/C power source.Now test the Clock/Radio, to See if the functions have returned to normal. If they have not returned to normal,unplug the Clock/Radio from the A/C power source and remove the internal battery. Replace this battery with a new Battery (CR2430). Let the microprocessor drain all the power out. Then reinsert the new battery and plug the Clock/Radio in to the A/C power source. The Clock/Radio functions should have returned to normal. If this is not the case, then you may have a more serious problem with the Clock/Radio. You will need to call the Emerson Customer Support. The Emerson Customer Support Telephone number is 1-800-909-1240. Give them the make and model number of your Clock/Radio and ask them for assistance with your problem. I hope this information helps you solve your problem. Thank you for using FixYa and have a nice day.

Jan 26, 2008 | Emerson Smartset Clock Radio

1 Answer

Projection display


I had the some problem a few days ago when we had a power outage during the night. Try unplugging it, leave it unplugged for about 10-20 seconds, and replug it back in. Reset your time on the clock and it should work then.

Nov 08, 2007 | Homedics Sound Spa Premier SS-5000 Clock...

Not finding what you are looking for?
Clock Radios Logo

Related Topics:

752 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clock Radios Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you a Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...