Question about D-Link Air DWL 700AP (DWL-700AP) 802.11b Wireless Access Point

1 Answer

Recover my code for wireless internet

Was forgotten my code to enter wireless internet for wii
i have reset the router
but now i want to recover my protection code
how

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 158 Answers

We will try a  hard-reset the D-Link Air DWL-700AP to the factory default settings, please dothe following:
Locate the reset button on the back of the DWL-700AP
Use a paper clip to press the reset button
Hold for about 5 seconds and then release
After the DWL-700AP reboots (this may take a few minutes) it will be reset
to the factory default settings.

then do a fresh configuration,
http://209.85.175.104/search?q=cache:Hm3Vs8XnH3QJ:wireless.cisbg.com/soft/Dlink/dwl700AP/Manual/dwl700ap_manual_102.pdf+D-Link+Air+DWL+700AP+802.11b+protection+code&hl=en&ct=clnk&cd=1&gl=in

the above link is the installation guide for setting up your Dlink wireless

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wireless router isn't working need serious help... i want to learn how to reset it


look on the outside back of the router there should be a access # you will need to connect to it .first disconnect the power cord and wait for 5min before re plugging it in,then enter pass code # if all else fails contact your internet provider and they can walk you through it.

Aug 24, 2014 | TP-LINK USA CORPORATION 54m Wireless...

1 Answer

I wont help with password netgaer


The default value of the Username is set to "admin" with no password entered. If there was a password on there that was forgotten, simply Reset the router to factory defaults. There is a small hole with a button that you can press and hold for about 30 seconds that will reset the router. Use the end of a paperclip to press the button.

Jan 27, 2014 | D-Link DWL-7100AP 802.11a, 802.11g/b...

1 Answer

Its because it got reset accidently and then how would i restore it back again. or can it still be restored back??


Sorry you will have to set it up again

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

hope this helps

Dec 05, 2010 | NetGear WG602 802.11g/b Wireless Access...

1 Answer

I have problems connectiong to wii


Hi,

Restart the router and reconnect all over again. If problem persist please see your service provider.

Cheers

Apr 14, 2010 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

Can somewone help me pls i need some help with my wii and seting it it alwAYS gives me an error code 51330 and some more help me pls thanks for your help???////


1. Are you using WEP or WPA security on your router?
1. Log into the router using the default IP (consult your router's manual for assistance)
2. Locate the "wireless security" section of your router settings and find the WEP or WPA key.
3. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F.
4. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F.
5. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters).
6. If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot.
7. If you are using WPA, the Wii console is compatible with the following types:
* WPA - PSK (TKIP)
* WPA - PSK (AES)
* WPA2 - PSK (AES)

2. If your WEP or WPA key is correct, then the problem might be related to MAC address filtering:
1. From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model).
2. If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings).
3. If the Mac address filter was disabled, then continue troubleshooting.

3. Try adjusting the "Channel" your wireless router broadcasts on. We highly recommend setting your wireless router to either channel 1 or 11. This can potentially increase the download speed. For information on accessing your router's settings, click here to select the brand name and model number of your router (if available).

4. Check Nintendo's router info for special notes, if available, for your router.
1. Click here to go to our Wireless Router lookup page.
2. Use the drop-down box to select, if available, your router manufacturer.
3. Click on your router's model number, if available.
4. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

5. Ensure that the router is set to broadcast in "mixed" or "b/g" mode. Routers set to "g only" may not be able to allow a successful connection from the Wii console. (The option to change this setting is typically found in the "Wireless" section of your router's settings. For information on accessing your router's settings, click here to select the brand name and model number of your router, if available.)

6. Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings:
1. On your PC, click "Start" and then "Run."
2. Type "CMD" into the field that appears to open a new window.
3. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.

7. Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response.

hope this will help..

May 24, 2009 | Dynex Enhanced-G Wireless Broadband Router

3 Answers

I forgot my passkey


The resetting to factory settings commands are:-
Reset Procedure print.gif Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the unit powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.

Step 6 The device is now at factory defaults.


...................sodeep

May 12, 2009 | Belkin (F5D7132) 802.11b/g Wireless Access...

2 Answers

Wii error code 51330


Your Wiis internal Wi-fi may be defective/ malfunctioning.

Feb 09, 2009 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

I have forgotten my password for my wireless internet connection.


Connect to Wireless router using LAN cable.
Open Router admin page using the gateway address you get from your network status window from Systray (Support tab in XP).
Follow router instruction to set new WLAN protocol and Password (WPA-PSK for better protection) and use new passphrase (or Key) to set PC client network card protocol.
If Router is Password protected and you missed it: reset to factory settings to reconfigure.

Dec 27, 2008 | Intel PRO/Wireless 2011B LAN Enterprise...

5 Answers

Hawking wireless router to reset password


If you press the reset button you only make a reboot.
To reset all the value to the factory setting you have to:
- Power off the device
- Hold the reset button pressed
- While you press the reset button put the power back on

Now your gateway address is again 192.168.1.254, login is admin and password is not present (leave it blank).

Mar 01, 2008 | Hawking Wireless-G HWR54G (603992506064)...

Not finding what you are looking for?
D-Link Air DWL 700AP (DWL-700AP) 802.11b Wireless Access Point Logo

909 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

scramblepad
scramblepad

Level 2 Expert

66 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a D-Link Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...