Question about Philips Cineos HTS9800W System

1 Answer

Lip sync playing ordinary tv

Listening to ordinary tv over the sound system, the sound is behind the tv picture and the sound from the tv's speakers

I have connected the HTS9800W to the tv via HDMI and for listening to tv programs over the sound system I have connected the phono audio out on the telly to the aux in on the HTS9800W

Any ideas how to get the lip sync right for ordinary tv?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 318 Answers

You need to have a sound speed equalization higher frequencies travel slow,
if you can buy a AV/RF CONVERTER the problem can finish
AV be connected to devices and RF to tv
this can over come that problem

Posted on Apr 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ht 6500


I don't see a question. Are you asking about a lip-sync problem and how to correct lip-sync error? If so I need more detail to answer your question.

Jul 11, 2014 | Samsung Home Theater Systems

3 Answers

No sound or power


IF ALL WIRES ARE CORRECTLY BEEN SETUP OR INSTALLED THEN THE NEXT STEP IS TO CONFIGURE THE SYSTEM TO WORK ON ALL SPEAKERS...

Before the setup of the speakers' channels
  • Press the SURR. button on the remote to select multichannel surround mode before adjusting the speaker settings.
  • In case of sound distortion, press and hold the SOUND button to select another transmission channel for the wireless rear speakers.
Setting Speakers' Channels
  1. Press 060227073157_11231.jpg to stop playback, then press SYSTEM MENU.
  2. Press 060227073234_11234.jpg repeatedly to select { Audio Setup Page }.
  3. Press 060227073211_11232.jpg060227073221_11233.jpg to highlight { Speaker Setup Page }, then press 060227073234_11234.jpg.

    060227073118_11228.jpg
  4. Enter its submenu by pressing 060227073234_11234.jpg.
  5. Press 060227073211_11232.jpg060227073221_11233.jpg to highlight one of the options below at a time, then press 060227073234_11234.jpg.

    • { Speakers Volume } – Volume level setting for individual speakers (-6dB – +6dB).

      060227073133_11229.jpg
    • { Speakers Delay } – Delay times setting in relation to the listening position/ distance for centre and surround speakers.

      060227073144_11230.jpg
  6. Press 060227073245_11235.jpg060227073234_11234.jpg to adjust to the setting that best suit your surround sound needs.
  7. Press OK to confirm.
Notes:
  • 1 ms increase/decrease of delay time is equivalent to 30 cm change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.
  • The test tone will automatically be generated to help you judge the sound level of each speaker.

Jan 27, 2008 | Philips Cineos HTS9800W System

1 Answer

How can I fix the echo between my TV speakers and my dvd/blu ray player home theater speakers when watching a movie. Also, in the settings menu on the BDV E370 system do I have to select speakers only...


Easy, disable the TV speakers or turn its volume down.

http://static.highspeedbackbone.net/pdf/Sony%20BDV-E370%20Manaual.pdf

Page 36 tells you how to sync the sound to the picture but you really shouldn't have the TV speakers competing (in stereo) with the Sony. (Page 56).

A) The TV speakers are probably inferior to teh Sony's
B) When you balanced the speakers during setup there was no 'with-the-TV-speakers-on' option. The image up front would suffer by adding an unaccounted for sound source.

Aug 11, 2011 | Sony BDV-E370 Theater System

1 Answer

VIZIO VHT510. soundbar and subwoofer work. No sound from satellite speakers


Do you have them connected to the sub? Those satellite speakers pick up the fainter sounds and work best in movies with 5.1 surround sound. Make sure they are behind the primary listening position. And try them with a 5.1 surround movie. If all speakers are up front switch to front listen mode. Good luck.

Mar 06, 2011 | Vizio VHT510 Theater System

1 Answer

I have a JVC G40 DVD home theater system and when I play DVD's the voice and picture don't match up. Specifically, Peoples lips move and then a second later what they say is heard...how do I fix this?


When viewing on Digital TV:-
Sometimes Audio and Video signal can not be transmitted simultaneously due to additional process time for the video signal compared to that of the audio signal.
Often video signal takes more time than the audio signal to convert from analogue signal to digital signal in the Digital TV.
It may result in mismatch of the picture and sound.
In the TH-G30/40's HD AV Sync menu, you can adjust the audio signal delay for simultaneous AV signal transmission
1. Delay time can be varied in 10msec steps.(0 to 300ms)
2. Delay time is different between TV Brands.
So you need to adjust the delay time for correct lip-sync.
The adjustment is listed in the instruction book page12

Jun 26, 2010 | JVC TH-G30 Theater System

1 Answer

How do you get DVD player SOUND to play through the TV speakers


plug the stereo headphone jack to your dvd headphone output then connect it to your tv audio/video in and press the tv/video switch in your tv remote control.

Jan 07, 2009 | Sony DAV-SB500W System

7 Answers

Surround sound not working through ordinary tv


Try connecting the red and white audio cords to your system from your cable box/satellite receiver instead of your tv. Worked for me.

Oct 01, 2007 | Home Theater Systems

2 Answers

Sound/Video delay


Lip-sync error is a widespread problem caused when video is delayed and audio arrives too soon. Widespread enough that three different manufacturers make dedicated products to address it, in fact (see review link below for those three). It is present to some extent in essentially all broadcasts and DVD?s. If you have a recently acquired DLP, LCD or plasma display it may have added enough additional video delay to make it noticeable but lip-sync error comes from MANY sources starting at image capture and continuing through post production and broadcast or DVD encoding and it is cumulative. There is usually enough lip-sync error in broadcasts and DVD's to cause a negative impact on viewer perception (Research done at Stanford showed this.) Many people don't consciously notice it until it gets very large because it's such an unnatural phenomenon ( audio can't come before the action causing the sound in the real world) we apparently subconsciously avoid looking at the faces and seeing the lips move "after" the sound from them is heard. A study at Stanford proved this causes negative viewer perception even for those who don't notice it so this is something we all need to notice as you already have. For those reading this who haven't noticed it, take a close look at the LIPS - force yourself to overcome your natural avoidance mechanism that keeps you from looking at the lips - and you will see lip-sync error you never noticed before. I think you will be amazed that you could possibly not have noticed it before. You will be seeing what JC is seeing. I even see it now on CRT TV's and am amazed I never noticed it so it's very obvious some avoidance mechanism is at work. And back to JC?s solution: I'd recommend one of these digital audio delay units. That way you can correct for ALL cumulative lip-sync error no matter what its source might be. Any one of these units reviewed will correct it ALL. With any one of these units you can adjust for perfect lip-sync at the start of each DVD or broadcast and not disturb the image you are watching during that fine adjustment. I have had a Felston DD340 since 2004 (three generations earlier than the DD740 covered in the review) but it still has the most important feature of all these units from these three different manufacturers which is their "plus and minus" buttons on their remotes that allow you to tweak the delay while watching your material without upsetting the video your are watching. My av receiver has a built in delay of 80 ms which isn't even enough audio delay to offset the video delay my plasma display adds but even if it were it isn't practical to adjust it for the changes in lip-sync error from program to program and DVD to DVD since it overlays the screen with menus when making the delay adjustment. With my DD340 (and any of the units reviewed) all you have to do is press the plus or minus button until you get perfect sync. Here is the review I mentioned: [URL="http://www.audaud.com/article.php?ArticleID=3011"]

Aug 30, 2007 | Home Theater Systems

2 Answers

Can't get all speakers to turn on in AV-1 function


can't seem to get the sound to come on. i knowe i have sound but will not turn on

Feb 09, 2007 | Amphion Mediaworks T-365 System

Not finding what you are looking for?
Philips Cineos HTS9800W System Logo

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Home Theater Systems Experts

Gyula Lacz

Level 3 Expert

482 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

kakima

Level 3 Expert

96333 Answers

Are you a Philips Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...