Question about Sanyo Microwave Ovens

1 Answer

Change light bulb in Sanyo Microwave EMS6786V

How can I change the light bulb in the Sanyo Mircowave EMS6786V please?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sanyo Master
  • 9,030 Answers

If there's no obvious removable cover over the bulb (and the owner's manual doesn't address it) some disassembly may be required.

Always unplug a microwave before removing or installing any bulbs.

If it's an over the range type, remove the vent grille across the top and see if bulbs can be accessed there. There may be a panel on the bottom covering the light(s), instead.

If not, chances are you'll have to remove it from the wall, then remove the outer cover. If so, the installation instructions are very handy, and it's best to have two people since the microwave can be heavy and awkward.

If you don't have your instructions, please reply back with your brand and model number.

Once it's out of the wall, the outer cover (wrapper) will need to be removed, just as you'll need to do on a counter top model.

On a counter top model, be sure it's unplugged, but otherwise ignore the instructions above this paragraph.

The screws you need to remove should be pretty obvious, but a special driver (such as a T20H type or GTXH20-100) may be needed.

Be sure to put all the screws back in the right holes, since some may be special grounding screws.

Bulbs can be had in most grocery stores, hardware stores, home improvement centers, and big box or department stores.

Many models use halogen lamps. You must not touch the new one with your bare skin, as the oils will shorten the bulb life.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Oct 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the light bulb in a KCM155j Mircowave


Most microwaves have a shield over the light bulb in the cooking compartment. Some are accessed from the outside most from the inside. Check to see if there are clips or screws that need to be removed to pull the shield off. Careful if there are screws, they are usually coated to prevent the waves from arcing if you crack or break off the coating you could have problems with the microwave arcing

Jan 11, 2014 | KitchenAid KCMC155J Convection/Microwave...

2 Answers

How to replace light


there is either a panel on back of unit you can remove and light bulb is there, if not you will need to remove case to change bulb.

Nov 25, 2009 | Sanyo EM-S5002W Microwave Oven

1 Answer

Replace light bulb on SANYO EM-U1000W Compact Microwave Oven


PLESE BEFORE YOU DO ANYTHING RFER TO A GUI HOW TO DISCHARGE A HIGH VOLTAGE CAPACITOR OR SEEK THE HELP OF A MICROWAVE TECHNICIAN. As for changing the bulb, if you remove the case you will be able to locate the bulb, and merely a case or removing ad replacing with a new one. Good luck.

Nov 16, 2009 | Sanyo Microwave Ovens

1 Answer

How do i change bulb in sanyo microwave EM-SL30N What do i do must i take the cover off what is the easy way please.


Make sure it is unplugged. Yes you must take the cover off and you will see the bulb. Gain access to it and replace it. Do not interfere with anything else.

Nov 09, 2009 | Sanyo EM-Z2100GS Microwave Oven

1 Answer

Changing Microwave bulb


Remove lid, you'll probably need a pozi drive screw driver and a tamper proof torx drive.
The bulb is located near the front.

Mar 15, 2009 | Microwave Ovens

1 Answer

Can not change interior lightbulb


how do I change the little light bulb on the top to take off the cover what do i need.

Please, lvinci@gmnew.com

Feb 01, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Turntable doesn't spin


Well the table might not be on the revolving piece- that is what happened to my microwave oven, or the revolving piece might have to be connected to a belt inside that turns it

Jan 17, 2009 | Sanyo Microwave Microwave Oven

1 Answer

Need new light bulb socket for GE spacemaker mircrowave


The bulbs are glued in at the factory. Unplug the microwave and see if you can remove the base of the bulb from the socket with needle nose pliers. You may have to twist the heck out of the bulb base but it should come out. If you do need a new socket it is available at www.geappliances.com under parts and accessories. Or call 1-800-626-2002 for GE factory parts

Dec 20, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

How to change a light bulb in a emerson mircowave model mw8115ss


If this is freestanding m/w:
1. disconnect from outlet
2. take the cover off.
3. light bulb located on right upper corner.

Nov 30, 2008 | Emerson Black Microwave Oven

1 Answer

Replacing interior light bulb in m/n 63694


On many recent models, it is necessary to remove the mircowave from the wall, then remove the cover to change the cavity bulb. They suggest that only an authoirzed servider replace them, in order to avoid liability. You can enter your actual, full model number (63694 is not enough) and get helpful exploded view drawings and order parts at http://www3.sears.com (the three is correct). Do not handle the bulbs with bare skin, it will shorten their lives. Use a clean dry cloth or gloves.

Apr 29, 2007 | Kenmore 63692 / 63694 / 63699 900 Watts...

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

2,430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9030 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Sanyo Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...