The phone works perfect at any of my friends' house but once connected to any of my home's phone outlets, receiving calls are OK but couldn't make an outgoing call. Right after I key in the first 3 digits (area code like 905 or 416) I was asked...PLEASE CHECK YOUR NUMBER AND TRY AGAIN etc.... Appreciate if you could help me out....thanks very much
my existing phones work fine but the new phone is really weird. tested Ok at the supplier's store and perfect at my friends' houses. But once tested at any of the phone outlet in my house, after keying the first 3 numbers....PLEASE CHECK YOUR NUMBER AND DIAL AGAIN etc... the scenario telling me my phone service in my house is OK and the new phone tested OK at other locations.
See if you could give me some clues....thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
See if you can borrow another phone known to be working, or plug your phone into someone elses home line to check out there is no fault in your phone
If all is well then you will need to contact your phone service provider.
1) if there no diallling tone test a) battery with VOM, clean the contacts batteries with ethylic alcohol with cotton swab. b) test the antenna is o.k or replace 2) the voltage line will be 48 Vdc , you must test it. use another phone that you know is working fine. 3) if the another phone work the line is the problem call to the company 4) if work replace the batte or antenaa or the phone completely. God bless you
are you using a modem? do you have a fax machine? switch the fax off. if a modem is present the main phone must be connected to that modem and the additional phones place through out the house (using other phone jacks)
Had the same problem with my v-tech portables. I unplugged the main phone from the wall outlet, electric outlet and unplugged the coordinating wires from the base. I also unplugged the extra phones from electric and detached their wires - waited a minute or two and plugged everything back in and waited for another minute or so and what do you know - my phones are working again as good as new!
please check first the position of tone-pulse switch in tone position mostly-if your phone use battery apply new fresh battery and connect it in right direction-test the line with any other working telephone if the line is ok. the problem in your phone if no call service provider(phone company)
HELLO . AM JAMAL FROM SYRIA , I VE THE SAME PROBLEM WITH THREE PREVIOUSLY USED XALIO 300 WHICH I BOUGHT FROM SOME BLACK MARKET. I SUGGEST U TO INSERT THE CODE ACCORDING TO UR COUNTRY , FOR EXAMPLE :
PRESS FIRST " R " BUTTON THEN 99 THEN " RC " CODE WRITTEN UNDER BASE UNIT THEN " R " OR " PAGING " AT THE LOW RIGHT CORNER OF HANDSET .