Question about Pioneer Car Audio & Video

Open Question

I have a Pioneer T1805 6 CD Changer in my Scion TC an is displaying an ERROR 4 Code. It will not play or eject the CDs. Is this a fixable problem?

Posted by on

5 Suggested Answers

Eagleeyes
  • 199 Answers

SOURCE: error 4

hi what model is the pioneer unit?


Mark
www.blueice-electronics.co.uk

Posted on Feb 25, 2008

  • 5 Answers

SOURCE: error 3 displayed for 2005

Turn your car on. Take a pen and press the reset button located on the disc changer. Hold for about 30 seconds and try it again.

Posted on Apr 23, 2008

  • 24 Answers

SOURCE: CD changer does not work

Please clean the cd magzin and changer, if any small particle is engaged in the gears system

Posted on Jul 17, 2008

  • 1 Answer

SOURCE: BLAUPUNKT 6-disc changer model #CDC-RF6ir

turn the unit upside down ... really ... try it mine is doing the same thing hope it helps

Posted on Jul 21, 2008

sticky92505
  • 77 Answers

SOURCE: i have a scion xb

you should visit the scion home page online and or check this link give this a try if no success let me know ill find it for you
Call the Scion Customer Experience at 1.866.70.SCION.

hope it helps
Ryan

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Infinity 6 CD Player (2007 KIA Rondo) "displays Error 21" when you try to play, eject or change a CD. Does anyone know what this is?


Personally, if it were me, I would replace your indash changer with an aftermarket single disc player. Indash changers are notoriously unreliable and go bad very easily.

Jun 01, 2011 | Car Audio & Video

1 Answer

I hav a clarion auto cd/stereo displaying err 6 please explain, thank you


Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD.
Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is upside-down.

For error code 6:
Try an original purchased cd with no scratches and see if the cd player reads it. If yes then lens is dirty or tired so try using a cleaning cd(has little brushes on it). If it doesn't read with the original cd try using the cleaning cd and if no go then look at purchasing a new cd player!

Nov 01, 2010 | Car Audio & Video

1 Answer

I have a 6 cd changer is my Sebring. It was playing disc #2 and I decided to change to disc #5. An error appeared on screen and now I'm unable to get the Cd player out. I think the two disc got stuck as...


get two wires and hook one of them up to the radio on the power wire and ground it and press eject and rub yout stomache and pat your head and hop on one foot and try to bite your ear and it should be fixed

Jul 05, 2010 | Car Audio & Video

1 Answer

Error message appears when magazine is put into changer


why doesn't my cd changer reads. it keeps saying no magazine, when i insert it in. when i hit the eject button it ejects it out but wont read it or the cds why???

Jul 26, 2008 | Car Audio & Video

1 Answer

How to use a Pioneer CX-P680 6 Disc Changer


Press The eject button on the disc changer and the cartridge should pop out of the disc changer insert cds in the cartridge and pop back into disc changer

Jun 18, 2008 | Car Audio & Video

1 Answer

Have a Blaupunkt AM FM Radio/In-Dash Ch Cgnager (6 stacker) in a 2003 Holden Commodore. After ejecting the 6th one of the CD's succesfully, get "CD Error mech" message and it will not eject the...


We eventually tried loading another CD to fill the one vacant spot we knew was in the changer even though we'd tried that before without success. This time it seems that we fluked it just as it was trying to eject CD 1 again and - somehow - the CD we were tryng to insert must have lifted the rim of the one that was stuck and it suddenly ejected. The remaining 4 CD's that were inside the changer but not even recognised, then started re-loading so it appears that they were all jammed up together. Once they'd reloaded we were able to eject them all successfully then reload.
We're not sure but think that it may have happened when the eject button was originally pressed once to eject CD 6 then, in error, held down for a 'eject all' procedure and the changer has become confused with both instructions.

Jun 01, 2008 | Blaupunkt Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

The Knight
The Knight

Level 3 Expert

71088 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...